josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Prusa-Firmware/Firmware
History
D.R.racer 48ce22d41f Fix blank LCD while err. Load to Extr. Failed 
Because this error is not an MMU error but a printer one, the existing infrastructure has been bent to support such a scenario.
During testing it turned out, that some machines fail to draw the error screen due to previous internal states.
This PR resets the internal states so that the conditions for drawing the error screen are met.
 		2023-01-16 09:25:04 +01:00
..
mmu2 Introduce FILAMENT_EJECTED + tune Eject operation + inc. MMU ver. 2.1.6 2022-12-30 14:23:44 +01:00
variants Merge pull request #3818 from wavexx/tm_default_state 2022-12-20 07:08:25 +01:00
BlinkM.cpp
…
BlinkM.h
…
Configuration.cpp Avoid using global variables 2022-12-05 16:43:51 +01:00
Configuration.h optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
ConfigurationStore.cpp Save a bit of RAM from CS 2022-11-18 14:50:07 +01:00
ConfigurationStore.h Replace calibration state with a new calibration bitmap 2022-12-30 14:14:01 +01:00
Configuration_adv.h PFW-1386 Use Marlin 2 unload sequence for single material 2022-09-16 10:22:39 +02:00
Configuration_var.h build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
Dcodes.cpp Handle CALIBRATION_STATUS_{Z,XYZ} 2022-12-30 14:14:01 +01:00
Dcodes.h Improve PAT9125 UI implementation 2022-09-16 10:20:32 +02:00
Filament_sensor.cpp eeprom_init_default also returns the read/default value 2022-11-18 14:50:07 +01:00
Filament_sensor.h Optimize filament sensor implementation 2022-09-16 10:22:38 +02:00
Firmware.ino
…
Marlin.h Remove T parameter from M221 2022-12-30 13:07:56 +01:00
MarlinSerial.cpp Remove ancient SNMM code in the MK3 branch 2022-02-15 15:58:33 +01:00
MarlinSerial.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
Marlin_main.cpp wizard: Do not complain about missing calibration if model is disabled 2023-01-16 07:31:33 +01:00
Prusa_farm.cpp More optimization 2022-11-18 14:50:07 +01:00
Prusa_farm.h Added //#define FARM_CONNECT_MESSAGE 2022-09-16 19:33:22 +02:00
Sd2Card.cpp Enable MISO pullup during SD CMD0 2022-10-10 09:43:50 +02:00
Sd2Card.h Change return types of two functions uint8_t 2022-01-30 11:39:24 +00:00
SdBaseFile.cpp Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
…
SdFatStructs.h
…
SdFatUtil.cpp Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFatUtil.h Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFile.cpp SDFile - fix errorneous offset computation 2021-03-30 11:33:42 +02:00
SdFile.h Remove commented debug code 2021-02-10 11:18:59 +01:00
SdInfo.h
…
SdVolume.cpp
…
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp change boolean to bool 2021-07-20 08:03:17 +02:00
Servo.h
…
SpoolJoin.cpp Rename Auto_deplete to Spool_join 2022-09-16 16:25:47 +02:00
SpoolJoin.h PFW-1362 Change isSpoolJoinEnabled to return bool 2022-09-16 10:23:47 +02:00
Tcodes.cpp RIP Bondtech long live the Extruder 2022-09-16 16:31:27 +02:00
Tcodes.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
Timer.cpp Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
Timer.h Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
TimerRemaining.h
…
adc.cpp Decouple temperature ISR from ADC readings 2022-07-25 17:30:21 +02:00
adc.h Fixup after rebase onto MK3 2022-09-16 10:23:47 +02:00
asm.h Simplify GETPC() 2022-02-02 21:06:58 +01:00
backlight.cpp Add newline at the end of file 2020-09-15 14:56:41 +02:00
backlight.h
…
boards.h
…
bootapp.c Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
bootapp.h Fix usage of RAMEND 2021-06-12 13:16:12 +02:00
cardreader.cpp Remove M999 remnants 2022-12-12 17:52:48 +01:00
cardreader.h Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
cmdqueue.cpp Handle/strip leading whitespace in gcode stream 2022-12-30 14:06:48 +01:00
cmdqueue.h Do not reset line on serial commands without N 2022-09-21 10:19:16 +02:00
config.h Remove SWSPI which is not used/implemented 2022-12-20 10:10:45 +01:00
conv2str.cpp ftostr12ns: change xx from long to int 2022-08-26 19:28:36 +03:00
conv2str.h
…
doxyfile
…
eeprom.cpp Do not heat the bed, on load/unload 2022-12-04 19:26:34 +02:00
eeprom.h Fix few values 2023-01-02 15:11:01 +01:00
fancheck.cpp TM: Fan measuring state reset unification 2023-01-16 08:43:36 +01:00
fancheck.h TM: Fan measuring state reset unification 2023-01-16 08:43:36 +01:00
fastio.h Change arduino IO to fastio where possible 2022-01-30 11:22:43 +00:00
first_lay_cal.cpp Address 3 different start scenarios 1st lay cal + MMU 2022-12-30 15:04:45 +01:00
first_lay_cal.h Address 3 different start scenarios 1st lay cal + MMU 2022-12-30 15:04:45 +01:00
heatbed_pwm.cpp Remove unnecessary assignment 2021-06-21 06:47:59 +02:00
la10compat.cpp Re-adjust LA10->15 conversion 2020-09-07 21:44:34 +02:00
la10compat.h
…
language.c Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
language.h Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
lcd.cpp further optimise lcdui_print_status_line 2022-11-13 09:29:37 +01:00
lcd.h further optimise lcdui_print_status_line 2022-11-13 09:29:37 +01:00
le.sh
…
macros.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
menu.cpp PFW-1397 Drop ON_MENU_ENTER 2022-11-08 13:49:40 +01:00
menu.h fixup 2022-11-08 13:49:40 +01:00
mesh_bed_calibration.cpp optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
mesh_bed_calibration.h Optimise if-statments in world2machine_clamp 2022-02-01 18:37:41 +00:00
mesh_bed_leveling.cpp Use memset instead of nested for-loop to zero a 2d array 2021-08-02 19:20:51 +00:00
mesh_bed_leveling.h Remove undefined function 2022-01-30 11:39:29 +00:00
messages.cpp Improve MSG_ACK_ERROR message 2022-12-17 20:25:47 +01:00
messages.h Improve MSG_ACK_ERROR message 2022-12-17 20:25:47 +01:00
mmu2.cpp Fix blank LCD while err. Load to Extr. Failed 2023-01-16 09:25:04 +01:00
mmu2.h Fixes from tests 2022-12-30 14:23:44 +01:00
mmu2_config.h Split the mmu2 config into MMU2 and MMU2S 2022-12-18 09:58:20 +01:00
mmu2_crc.cpp Upgrade protocol to v2.1 - read/write registers + CRC 2022-09-16 10:22:38 +02:00
mmu2_crc.h Upgrade protocol to v2.1 - read/write registers + CRC 2022-09-16 10:22:38 +02:00
mmu2_error_converter.cpp Introduce FILAMENT_EJECTED + tune Eject operation + inc. MMU ver. 2.1.6 2022-12-30 14:23:44 +01:00
mmu2_error_converter.h cleanup: Do not return const values from functions 2022-09-30 12:55:47 +02:00
mmu2_fsensor.cpp Reuse FSensor runout blocking impl. throughout the whole FW 2022-09-16 10:22:38 +02:00
mmu2_fsensor.h Reuse FSensor runout blocking impl. throughout the whole FW 2022-09-16 10:22:38 +02:00
mmu2_log.cpp Disable `Error:` messages for MMU2 errors 2022-11-03 12:09:03 +01:00
mmu2_log.h mmu: Embed the newline in MMU2_ECHO_MSG/MMU2_ERROR_MSG 2022-12-16 16:21:59 +01:00
mmu2_power.cpp build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
mmu2_power.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
mmu2_progress_converter.cpp cleanup: Do not return const values from functions 2022-09-30 12:55:47 +02:00
mmu2_progress_converter.h cleanup: Do not return const values from functions 2022-09-30 12:55:47 +02:00
mmu2_protocol.cpp cleanup: Remove implicit fallthrough in CRC validation 2022-09-30 12:55:47 +02:00
mmu2_protocol.h Implement read/write registers for M707/M708 2022-09-16 10:23:47 +02:00
mmu2_protocol_logic.cpp Introduce FILAMENT_EJECTED + tune Eject operation + inc. MMU ver. 2.1.6 2022-12-30 14:23:44 +01:00
mmu2_protocol_logic.h Show an error screen when try-unload fails to push filament into nozzle 2022-12-30 14:23:44 +01:00
mmu2_reporting.cpp Change MMU error links to a new url 2023-01-02 12:43:08 +01:00
mmu2_reporting.h Revive MMU stats + LCD screens 2022-11-20 17:27:36 +01:00
mmu2_serial.cpp cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
mmu2_serial.h cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
motion_control.cpp optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
motion_control.h optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
optiboot_xflash.cpp Fix MK2.5 softReset() 2022-12-16 12:10:47 +01:00
optiboot_xflash.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pat9125.cpp Remove SWSPI which is not used/implemented 2022-12-20 10:10:45 +01:00
pat9125.h Cleanup pat9125.h 2022-09-16 10:17:04 +02:00
pins.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
pins_Einsy_1_0.h Fix MK2.5 softReset() 2022-12-16 12:10:47 +01:00
pins_Rambo_1_0.h More documentation for pins file 2022-12-16 12:29:59 +01:00
pins_Rambo_1_3.h More documentation for pins file 2022-12-16 12:29:59 +01:00
planner.cpp Shorter code 2023-01-06 19:33:32 +01:00
planner.h optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
printers.h
…
qr_solve.cpp
…
qr_solve.h
…
rbuf.c
…
rbuf.h
…
sm4.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp Remove extra delay after critical sound 2022-12-31 01:13:45 +01:00
sound.h Prune most of TODO from mmu2.cpp 2022-09-16 10:21:53 +02:00
speed_lookuptable.cpp
…
speed_lookuptable.h Fix MUL24x24R24 comment 2022-02-09 00:26:46 +01:00
spi.c
…
spi.h
…
static_assert.h
…
stepper.cpp optimisation: re-use delay_keep_alive() in a few places 2023-01-15 19:21:55 +01:00
stepper.h Checkpoint: jam detection 2022-09-16 10:20:32 +02:00
stk500.h
…
strlen_cx.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
swi2c.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
swi2c.h Add disable() to swi2c as well 2022-09-16 10:06:26 +02:00
system_timer.h Move millis_nc to system_timer.h 2022-07-18 17:53:27 +02:00
temp_model.h TM: Store only the last autotune result state 2022-12-12 17:52:48 +01:00
temperature.cpp TM: Fan measuring state reset unification 2023-01-16 08:43:36 +01:00
temperature.h Restore the previous model state when performing a nozzle change 2022-12-12 20:17:56 +01:00
thermistortables.h Implement MIN/MAX AMBIENT safety checks 2020-08-01 17:38:10 +02:00
timer02.c split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
timer02.h split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
tmc2130.cpp Typo: meassure -> measure 2022-12-22 12:54:42 +01:00
tmc2130.h A few more meassuring typos 2022-12-22 12:54:42 +01:00
tone04.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
twi.cpp twi safe init 2022-09-16 10:06:26 +02:00
twi.h Shorter TWI timeout 2022-09-16 10:06:26 +02:00
uart2.c Increase RX buffer size 2022-09-16 10:21:53 +02:00
uart2.h Implement mmu2 serial interface 2022-09-16 10:21:53 +02:00
ultralcd.cpp TM: Restore extruder autofan state when stopping/resuming 2023-01-16 08:43:36 +01:00
ultralcd.h wizard: Rewrite the wizard handling loop 2022-12-30 14:14:01 +01:00
util.cpp wizard: Resume the wizard for missing calibrations during upgrades 2022-12-30 14:14:01 +01:00
util.h wizard: Resume the wizard for missing calibrations during upgrades 2022-12-30 14:14:01 +01:00
vector_3.cpp
…
vector_3.h
…
xflash.c xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash.h xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash_dump.cpp Simplify GETPC() 2022-02-02 21:06:58 +01:00
xflash_dump.h Crash if pullups get enabled on the thermistor inputs 2022-02-01 12:34:07 +01:00
xflash_layout.h Make layout static regardless of what is enabled 2022-02-17 09:34:09 +01:00
xyzcal.cpp Typo: meassure -> measure 2022-12-22 12:54:42 +01:00
xyzcal.h Typo: meassure -> measure 2022-12-22 12:54:42 +01:00