josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Firmware for Original Prusa i3 3D printer by PrusaResearch
49 Commits 31 Branches 140 Tags 71 MiB
C++ 75.9%
C 14.4%
CMake 3.7%
Python 3.4%
Shell 2.1%
Other 0.3%
Go to file
bubnikv 562c089e17 Initial implementation of the Toshiba FlashAir support: 
Get the status of the Toshiba FlashAir, namely its IP address.
The IP address is currently reported through an M46, but this
is subject to change and the IP address shall be shown on the display.
 		2016-07-21 10:48:08 +02:00
Firmware Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
hex_files MK2 Config files and hex output added 2016-05-31 14:36:31 +02:00
LICENSE MK2 Firmware release. 2016-05-31 14:08:04 +02:00
README.md MK2 Firmware release. 2016-05-31 14:08:04 +02:00

README.md

Original Prusa i3 Plus Firmware

General instructions

Pre-compiled hex files for all printers by PRUSA RESEARCH are available in hex_files folder.

Just clone the repo and flash it to the firmware

Build instructions

Step 1

Install arduino

Step 2

Remove Liquid Crystal library from your arduino or rename it

Step 3

Install the arduino addon in root of this repo

Step 4

Copy one of the configuration from variants folder to the the Firmware folder

Step 5

Rename it to "Configuration_prusa.h"

Step 6

Compile the firmware

Step 7

Upload the firmware to board