josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Prusa-Firmware/Firmware/mmu2_reporting.cpp

296 lines
11 KiB
C++
Raw Blame History

#include "mmu2.h"
#include "mmu2_reporting.h"
#include "mmu2_error_converter.h"
#include "mmu2/error_codes.h"
#include "mmu2/buttons.h"
#include "ultralcd.h"
#include "Filament_sensor.h"
#include "language.h"
#include "temperature.h"
#include "sound.h"
namespace MMU2 {
const char * ProgressCodeToText(uint16_t pc); // we may join progress convertor and reporter together
void BeginReport(CommandInProgress /*cip*/, uint16_t ec) {
custom_message_type = CustomMsg::MMUProgress;
lcd_setstatuspgm( _T(ProgressCodeToText(ec)) );
}
void EndReport(CommandInProgress /*cip*/, uint16_t /*ec*/) {
// clear the status msg line - let the printed filename get visible again
custom_message_type = CustomMsg::Status;
}
/**
* @brief Renders any characters that will be updated live on the MMU error screen.
*Currently, this is FINDA and Filament Sensor status and Extruder temperature.
*/
extern void ReportErrorHookDynamicRender(void){
// beware - this optimization abuses the fact, that FindaDetectsFilament returns 0 or 1 and '0' is followed by '1' in the ASCII table
lcd_putc_at(3, 2, mmu2.FindaDetectsFilament() + '0');
lcd_putc_at(8, 2, fsensor.getFilamentPresent() + '0');
// print active/changing filament slot
lcd_set_cursor(10, 2);
lcdui_print_extruder();
// Print active extruder temperature
lcd_set_cursor(16, 2);
lcd_printf_P(PSTR("%3d"), (int)(degHotend(0) + 0.5));
}
/**
* @brief Renders any characters that are static on the MMU error screen i.e. they don't change.
* @param[in] ei Error code index
*/
static void ReportErrorHookStaticRender(uint8_t ei) {
//! Show an error screen
//! When an MMU error occurs, the LCD content will look like this:
//! |01234567890123456789|
//! |MMU FW update needed| <- title/header of the error: max 20 characters
//! |prusa3d.com/ERR04504| <- URL 20 characters
//! |FI:1 FS:1 5>3 t201°| <- status line, t is thermometer symbol
//! |>Retry >Done >W| <- buttons
bool two_choices = false;
// Read and determine what operations should be shown on the menu
const uint8_t button_operation = PrusaErrorButtons(ei);
const uint8_t button_op_right = BUTTON_OP_RIGHT(button_operation);
const uint8_t button_op_middle = BUTTON_OP_MIDDLE(button_operation);
// Check if the menu should have three or two choices
if (button_op_right == (uint8_t)ButtonOperations::NoOperation){
// Two operations not specified, the error menu should only show two choices
two_choices = true;
}
lcd_set_custom_characters_nextpage();
lcd_update_enable(false);
lcd_clear();
// Print title and header
lcd_printf_P(PSTR("%.20S\nprusa3d.com/ERR04%hu"), _T(PrusaErrorTitle(ei)), PrusaErrorCode(ei) );
ReportErrorHookSensorLineRender();
// Render the choices
lcd_show_choices_prompt_P(two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE, _T(PrusaErrorButtonTitle(button_op_middle)), _T(two_choices ? PrusaErrorButtonMore() : PrusaErrorButtonTitle(button_op_right)), 10, two_choices ? nullptr : _T(PrusaErrorButtonMore()));
}
extern void ReportErrorHookSensorLineRender()
{
// Render static characters in third line
lcd_set_cursor(0, 2);
lcd_printf_P(PSTR("FI: FS: > %c %c"), LCD_STR_THERMOMETER[0], LCD_STR_DEGREE[0]);
}
/**
* @brief Monitors the LCD button selection without blocking MMU communication
* @param[in] ei Error code index
* @return 0 if there is no knob click --
* 1 if user clicked 'More' and firmware should render
* the error screen when ReportErrorHook is called next --
* 2 if the user selects an operation and we would like
* to exit the error screen. The MMU will raise the menu
* again if the error is not solved.
*/
static uint8_t ReportErrorHookMonitor(uint8_t ei) {
uint8_t ret = 0;
bool two_choices = false;
static int8_t enc_dif = lcd_encoder_diff;
if (lcd_encoder_diff == 0)
{
// lcd_update_enable(true) was called outside ReportErrorHookMonitor
// It will set lcd_encoder_diff to 0, sync enc_dif
enc_dif = 0;
}
// Read and determine what operations should be shown on the menu
const uint8_t button_operation = PrusaErrorButtons(ei);
const uint8_t button_op_right = BUTTON_OP_RIGHT(button_operation);
const uint8_t button_op_middle = BUTTON_OP_MIDDLE(button_operation);
// Check if the menu should have three or two choices
if (button_op_right == (uint8_t)ButtonOperations::NoOperation){
// Two operations not specified, the error menu should only show two choices
two_choices = true;
}
static int8_t current_selection = two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE;
static int8_t choice_selected = -1;
// Check if knob was rotated
if (abs(enc_dif - lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) {
if (two_choices == false) { // third_choice is not nullptr, safe to dereference
if (enc_dif > lcd_encoder_diff && current_selection != LCD_LEFT_BUTTON_CHOICE) {
// Rotating knob counter clockwise
current_selection--;
} else if (enc_dif < lcd_encoder_diff && current_selection != LCD_RIGHT_BUTTON_CHOICE) {
// Rotating knob clockwise
current_selection++;
}
} else {
if (enc_dif > lcd_encoder_diff && current_selection != LCD_LEFT_BUTTON_CHOICE) {
// Rotating knob counter clockwise
current_selection = LCD_LEFT_BUTTON_CHOICE;
} else if (enc_dif < lcd_encoder_diff && current_selection != LCD_MIDDLE_BUTTON_CHOICE) {
// Rotating knob clockwise
current_selection = LCD_MIDDLE_BUTTON_CHOICE;
}
}
// Update '>' render only
//! @brief Button menu
//!
//! @code{.unparsed}
//! |01234567890123456789|
//! | |
//! | |
//! | |
//! |>(left) |
//! ----------------------
//! Three choices
//! |>(left)>(mid)>(righ)|
//! ----------------------
//! Two choices
//! ----------------------
//! |>(left) >(mid) |
//! ----------------------
//! @endcode
//
lcd_set_cursor(0, 3);
lcd_print(current_selection == LCD_LEFT_BUTTON_CHOICE ? '>': ' ');
if (two_choices == false)
{
lcd_set_cursor(9, 3);
lcd_print(current_selection == LCD_MIDDLE_BUTTON_CHOICE ? '>': ' ');
lcd_set_cursor(18, 3);
lcd_print(current_selection == LCD_RIGHT_BUTTON_CHOICE ? '>': ' ');
} else {
lcd_set_cursor(10, 3);
lcd_print(current_selection == LCD_MIDDLE_BUTTON_CHOICE ? '>': ' ');
}
// Consume rotation event and make feedback sound
enc_dif = lcd_encoder_diff;
Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
}
// Check if knob was clicked and consume the event
if (lcd_clicked()) {
Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
choice_selected = current_selection;
} else {
// continue monitoring
return ret;
}
if ((two_choices && choice_selected == LCD_MIDDLE_BUTTON_CHOICE) // Two choices and middle button selected
|| (!two_choices && choice_selected == LCD_RIGHT_BUTTON_CHOICE)) // Three choices and right most button selected
{
// 'More' show error description
lcd_show_fullscreen_message_and_wait_P(_T(PrusaErrorDesc(ei)));
ret = 1;
} else if(choice_selected == LCD_MIDDLE_BUTTON_CHOICE) {
SetButtonResponse((ButtonOperations)button_op_right);
ret = 2;
} else {
SetButtonResponse((ButtonOperations)button_op_middle);
ret = 2;
}
// Reset static variables to their default value
current_selection = two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE;
choice_selected = -1;
return ret;
}
enum class ReportErrorHookStates : uint8_t {
RENDER_ERROR_SCREEN = 0,
MONITOR_SELECTION = 1,
DISMISS_ERROR_SCREEN = 2,
};
enum ReportErrorHookStates ReportErrorHookState = ReportErrorHookStates::RENDER_ERROR_SCREEN;
void ReportErrorHook(uint16_t ec, uint8_t res) {
if (mmu2.MMUCurrentErrorCode() == ErrorCode::OK && res == MMU2::ErrorSourceMMU)
{
// If the error code suddenly changes to OK, that means
// a button was pushed on the MMU and the LCD should
// dismiss the error screen until MMU raises a new error
ReportErrorHookState = ReportErrorHookStates::DISMISS_ERROR_SCREEN;
} else {
// attempt an automatic Retry button
if( ReportErrorHookState == ReportErrorHookStates::MONITOR_SELECTION ){
if( mmu2.RetryIfPossible(ec) ){
ReportErrorHookState = ReportErrorHookStates::DISMISS_ERROR_SCREEN;
}
}
}
const uint8_t ei = PrusaErrorCodeIndex(ec);
switch ((uint8_t)ReportErrorHookState)
{
case (uint8_t)ReportErrorHookStates::RENDER_ERROR_SCREEN:
ReportErrorHookStaticRender(ei);
ReportErrorHookState = ReportErrorHookStates::MONITOR_SELECTION;
// Fall through
case (uint8_t)ReportErrorHookStates::MONITOR_SELECTION:
mmu2.is_mmu_error_monitor_active = true;
ReportErrorHookDynamicRender(); // Render dynamic characters
switch (ReportErrorHookMonitor(ei))
{
case 0:
// No choice selected, return to loop()
break;
case 1:
// More button selected, change state
ReportErrorHookState = ReportErrorHookStates::RENDER_ERROR_SCREEN;
break;
case 2:
// Exit error screen and enable lcd updates
lcd_set_custom_characters();
lcd_update_enable(true);
lcd_return_to_status();
// Reset the state in case a new error is reported
mmu2.is_mmu_error_monitor_active = false;
ReportErrorHookState = ReportErrorHookStates::RENDER_ERROR_SCREEN;
break;
default:
break;
}
return; // Always return to loop() to let MMU trigger a call to ReportErrorHook again
break;
case (uint8_t)ReportErrorHookStates::DISMISS_ERROR_SCREEN:
lcd_set_custom_characters();
lcd_update_enable(true);
lcd_return_to_status();
// Reset the state in case a new error is reported
mmu2.is_mmu_error_monitor_active = false;
ReportErrorHookState = ReportErrorHookStates::RENDER_ERROR_SCREEN;
break;
default:
break;
}
}
void ReportProgressHook(CommandInProgress cip, uint16_t ec) {
if (cip != CommandInProgress::NoCommand)
{
custom_message_type = CustomMsg::MMUProgress;
lcd_setstatuspgm( _T(ProgressCodeToText(ec)) );
} else {
// If there is no command in progress we can display other
// useful information such as the name of the SD file
// being printed
custom_message_type = CustomMsg::Status;
}
}
} // namespace MMU2
Reference in New Issue View Git Blame Copy Permalink