josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Prusa-Firmware/Firmware/mmu2.cpp

927 lines
30 KiB
C++
Raw Blame History

#include "mmu2.h"
#include "mmu2_error_converter.h"
#include "mmu2_fsensor.h"
#include "mmu2_log.h"
#include "mmu2_power.h"
#include "mmu2_progress_converter.h"
#include "mmu2_reporting.h"
#include "Marlin.h"
#include "language.h"
#include "messages.h"
#include "sound.h"
#include "stepper.h"
#include "strlen_cx.h"
#include "temperature.h"
#include "ultralcd.h"
#include "cardreader.h" // for IS_SD_PRINTING
#include "SpoolJoin.h"
// As of FW 3.12 we only support building the FW with only one extruder, all the multi-extruder infrastructure will be removed.
// Saves at least 800B of code size
static_assert(EXTRUDERS==1);
// Settings for filament load / unload from the LCD menu.
// This is for Prusa MK3-style extruders. Customize for your hardware.
#define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
#define NOZZLE_PARK_XY_FEEDRATE 50
#define NOZZLE_PARK_Z_FEEDRATE 15
// Nominal distance from the extruder gear to the nozzle tip is 87mm
// However, some slipping may occur and we need separate distances for
// LoadToNozzle and ToolChange.
// - +5mm seemed good for LoadToNozzle,
// - but too much (made blobs) for a ToolChange
static constexpr float MMU2_LOAD_TO_NOZZLE_LENGTH = 87.0F + 5.0F;
// As discussed with our PrusaSlicer profile specialist
// - ToolChange shall not try to push filament into the very tip of the nozzle
// to have some space for additional G-code to tune the extruded filament length
// in the profile
static constexpr float MMU2_TOOL_CHANGE_LOAD_LENGTH = 30.0F;
static constexpr float MMU2_LOAD_TO_NOZZLE_FEED_RATE = 20.0F; // mm/s
static constexpr float MMU2_UNLOAD_TO_FINDA_FEED_RATE = 120.0F; // mm/s
// The first the MMU does is initialise its axis. Meanwhile the E-motor will unload 20mm of filament in approx. 1 second.
static constexpr float MMU2_RETRY_UNLOAD_TO_FINDA_LENGTH = 20.0f; // mm
static constexpr float MMU2_RETRY_UNLOAD_TO_FINDA_FEED_RATE = 20.0f; // mm/s
static constexpr uint8_t MMU2_NO_TOOL = 99;
static constexpr uint32_t MMU_BAUD = 115200;
struct E_Step {
float extrude; ///< extrude distance in mm
float feedRate; ///< feed rate in mm/s
};
static constexpr E_Step ramming_sequence[] PROGMEM = {
{ 0.2816F, 1339.0F / 60.F},
{ 0.3051F, 1451.0F / 60.F},
{ 0.3453F, 1642.0F / 60.F},
{ 0.3990F, 1897.0F / 60.F},
{ 0.4761F, 2264.0F / 60.F},
{ 0.5767F, 2742.0F / 60.F},
{ 0.5691F, 3220.0F / 60.F},
{ 0.1081F, 3220.0F / 60.F},
{ 0.7644F, 3635.0F / 60.F},
{ 0.8248F, 3921.0F / 60.F},
{ 0.8483F, 4033.0F / 60.F},
{ -15.0F, 6000.0F / 60.F},
{ -24.5F, 1200.0F / 60.F},
{ -7.0F, 600.0F / 60.F},
{ -3.5F, 360.0F / 60.F},
{ 20.0F, 454.0F / 60.F},
{ -20.0F, 303.0F / 60.F},
{ -35.0F, 2000.0F / 60.F},
};
static constexpr E_Step load_to_nozzle_sequence[] PROGMEM = {
{ 10.0F, 810.0F / 60.F}, // feed rate = 13.5mm/s - Load fast until filament reach end of nozzle
{ 25.0F, 198.0F / 60.F}, // feed rate = 3.3mm/s - Load slower once filament is out of the nozzle
};
namespace MMU2 {
void execute_extruder_sequence(const E_Step *sequence, int steps);
template<typename F>
void waitForHotendTargetTemp(uint16_t delay, F f){
while (((degTargetHotend(active_extruder) - degHotend(active_extruder)) > 5)) {
f();
delay_keep_alive(delay);
}
}
void WaitForHotendTargetTempBeep(){
waitForHotendTargetTemp(3000, []{ Sound_MakeSound(e_SOUND_TYPE_StandardPrompt); } );
}
MMU2 mmu2;
MMU2::MMU2()
: is_mmu_error_monitor_active(false)
, logic(&mmu2Serial)
, extruder(MMU2_NO_TOOL)
, tool_change_extruder(MMU2_NO_TOOL)
, resume_position()
, resume_hotend_temp(0)
, logicStepLastStatus(StepStatus::Finished)
, state(xState::Stopped)
, mmu_print_saved(SavedState::None)
, loadFilamentStarted(false)
, unloadFilamentStarted(false)
, loadingToNozzle(false)
, inAutoRetry(false)
, retryAttempts(MAX_RETRIES)
{
}
void MMU2::Start() {
#ifdef MMU_HWRESET
WRITE(MMU_RST_PIN, 1);
SET_OUTPUT(MMU_RST_PIN); // setup reset pin
#endif //MMU_HWRESET
mmu2Serial.begin(MMU_BAUD);
PowerOn(); // I repurposed this to serve as our EEPROM disable toggle.
Reset(ResetForm::ResetPin);
mmu2Serial.flush(); // make sure the UART buffer is clear before starting communication
extruder = MMU2_NO_TOOL;
state = xState::Connecting;
// start the communication
logic.Start();
ResetRetryAttempts();
}
void MMU2::Stop() {
StopKeepPowered();
PowerOff(); // This also disables the MMU in the EEPROM.
}
void MMU2::StopKeepPowered(){
state = xState::Stopped;
logic.Stop();
mmu2Serial.close();
}
void MMU2::Reset(ResetForm level){
switch (level) {
case Software: ResetX0(); break;
case ResetPin: TriggerResetPin(); break;
case CutThePower: PowerCycle(); break;
default: break;
}
}
void MMU2::ResetX0() {
logic.ResetMMU(); // Send soft reset
}
void MMU2::TriggerResetPin(){
reset();
}
void MMU2::PowerCycle(){
// cut the power to the MMU and after a while restore it
// Sadly, MK3/S/+ cannot do this
// NOTE: the below will toggle the EEPROM var. Should we
// assert this function is never called in the MK3 FW? Do we even care?
PowerOff();
delay_keep_alive(1000);
PowerOn();
}
void MMU2::PowerOff(){
power_off();
}
void MMU2::PowerOn(){
power_on();
}
bool MMU2::ReadRegister(uint8_t address){
if( ! WaitForMMUReady())
return false;
logic.ReadRegister(address); // we may signal the accepted/rejected status of the response as return value of this function
manage_response(false, false);
return true;
}
bool MMU2::WriteRegister(uint8_t address, uint16_t data){
if( ! WaitForMMUReady())
return false;
logic.WriteRegister(address, data); // we may signal the accepted/rejected status of the response as return value of this function
manage_response(false, false);
return true;
}
void MMU2::mmu_loop() {
// We only leave this method if the current command was successfully completed - that's the Marlin's way of blocking operation
// Atomic compare_exchange would have been the most appropriate solution here, but this gets called only in Marlin's task,
// so thread safety should be kept
static bool avoidRecursion = false;
if (avoidRecursion)
return;
avoidRecursion = true;
logicStepLastStatus = LogicStep(); // it looks like the mmu_loop doesn't need to be a blocking call
if (is_mmu_error_monitor_active){
// Call this every iteration to keep the knob rotation responsive
// This includes when mmu_loop is called within manage_response
ReportErrorHook((uint16_t)lastErrorCode, mmu2.MMUCurrentErrorCode() == ErrorCode::OK ? ErrorSourcePrinter : ErrorSourceMMU);
}
avoidRecursion = false;
}
void MMU2::CheckFINDARunout()
{
// Check for FINDA filament runout
if (!FindaDetectsFilament() && CHECK_FSENSOR) {
SERIAL_ECHOLNPGM("FINDA filament runout!");
stop_and_save_print_to_ram(0, 0);
restore_print_from_ram_and_continue(0);
if (SpoolJoin::spooljoin.isSpoolJoinEnabled() && get_current_tool() != (uint8_t)FILAMENT_UNKNOWN) // Can't auto if F=?
{
enquecommand_front_P(PSTR("M600 AUTO")); //save print and run M600 command
}
else
{
enquecommand_front_P(PSTR("M600")); //save print and run M600 command
}
}
}
struct ReportingRAII {
CommandInProgress cip;
inline ReportingRAII(CommandInProgress cip):cip(cip){
BeginReport(cip, (uint16_t)ProgressCode::EngagingIdler);
}
inline ~ReportingRAII(){
EndReport(cip, (uint16_t)ProgressCode::OK);
}
};
bool MMU2::WaitForMMUReady(){
switch(State()){
case xState::Stopped:
return false;
case xState::Connecting:
// shall we wait until the MMU reconnects?
// fire-up a fsm_dlg and show "MMU not responding"?
default:
return true;
}
}
bool MMU2::RetryIfPossible(uint16_t ec){
if( retryAttempts ){
SERIAL_ECHOPGM("retryAttempts=");SERIAL_ECHOLN((uint16_t)retryAttempts);
SetButtonResponse(ButtonOperations::Retry);
// check, that Retry is actually allowed on that operation
if( ButtonAvailable(ec) != NoButton ){
inAutoRetry = true;
SERIAL_ECHOLNPGM("RetryButtonPressed");
// We don't decrement until the button is acknowledged by the MMU.
//--retryAttempts; // "used" one retry attempt
return true;
}
}
inAutoRetry = false;
return false;
}
void MMU2::ResetRetryAttempts(){
SERIAL_ECHOLNPGM("ResetRetryAttempts");
retryAttempts = MAX_RETRIES;
}
void MMU2::DecrementRetryAttempts(){
if (inAutoRetry && retryAttempts)
{
SERIAL_ECHOLNPGM("DecrementRetryAttempts");
retryAttempts--;
}
}
bool MMU2::tool_change(uint8_t index) {
if( ! WaitForMMUReady())
return false;
if (index != extruder) {
if (!IS_SD_PRINTING && !usb_timer.running())
{
// If Tcodes are used manually through the serial
// we need to unload manually as well
unload();
}
ReportingRAII rep(CommandInProgress::ToolChange);
FSensorBlockRunout blockRunout;
st_synchronize();
tool_change_extruder = index;
logic.ToolChange(index); // let the MMU pull the filament out and push a new one in
manage_response(true, true);
// reset current position to whatever the planner thinks it is
plan_set_e_position(current_position[E_AXIS]);
extruder = index; //filament change is finished
SpoolJoin::spooljoin.setSlot(index);
// @@TODO really report onto the serial? May be for the Octoprint? Not important now
// SERIAL_ECHO_START();
// SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(extruder));
}
return true;
}
/// Handle special T?/Tx/Tc commands
///
///- T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
///- Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
///- Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
bool MMU2::tool_change(char code, uint8_t slot) {
if( ! WaitForMMUReady())
return false;
FSensorBlockRunout blockRunout;
switch (code) {
case '?': {
waitForHotendTargetTemp(100, []{});
load_filament_to_nozzle(slot);
} break;
case 'x': {
set_extrude_min_temp(0); // Allow cold extrusion since Tx only loads to the gears not nozzle
st_synchronize();
tool_change_extruder = slot;
logic.ToolChange(slot);
manage_response(false, false);
extruder = slot;
SpoolJoin::spooljoin.setSlot(slot);
set_extrude_min_temp(EXTRUDE_MINTEMP);
} break;
case 'c': {
waitForHotendTargetTemp(100, []{});
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, sizeof(load_to_nozzle_sequence) / sizeof (load_to_nozzle_sequence[0]));
} break;
}
return true;
}
void MMU2::get_statistics() {
logic.Statistics();
}
uint8_t MMU2::get_current_tool() const {
return extruder == MMU2_NO_TOOL ? (uint8_t)FILAMENT_UNKNOWN : extruder;
}
uint8_t MMU2::get_tool_change_tool() const {
return tool_change_extruder == MMU2_NO_TOOL ? (uint8_t)FILAMENT_UNKNOWN : tool_change_extruder;
}
bool MMU2::set_filament_type(uint8_t index, uint8_t type) {
if( ! WaitForMMUReady())
return false;
// @@TODO - this is not supported in the new MMU yet
// cmd_arg = filamentType;
// command(MMU_CMD_F0 + index);
manage_response(false, false); // true, true); -- Comment: how is it possible for a filament type set to fail?
return true;
}
bool MMU2::unload() {
if( ! WaitForMMUReady())
return false;
WaitForHotendTargetTempBeep();
{
FSensorBlockRunout blockRunout;
ReportingRAII rep(CommandInProgress::UnloadFilament);
filament_ramming();
logic.UnloadFilament();
manage_response(false, true);
Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
// no active tool
extruder = MMU2_NO_TOOL;
tool_change_extruder = MMU2_NO_TOOL;
}
return true;
}
bool MMU2::cut_filament(uint8_t index){
if( ! WaitForMMUReady())
return false;
ReportingRAII rep(CommandInProgress::CutFilament);
logic.CutFilament(index);
manage_response(false, true);
return true;
}
void FullScreenMsg(const char *pgmS, uint8_t slot){
lcd_update_enable(false);
lcd_clear();
lcd_puts_at_P(0, 1, pgmS);
lcd_print(' ');
lcd_print(slot + 1);
}
bool MMU2::load_to_extruder(uint8_t index){
FullScreenMsg(_T(MSG_TESTING_FILAMENT), index);
tool_change(index);
st_synchronize();
unload();
lcd_update_enable(true);
return true;
}
bool MMU2::load_filament(uint8_t index) {
if( ! WaitForMMUReady())
return false;
FullScreenMsg(_T(MSG_LOADING_FILAMENT), index);
ReportingRAII rep(CommandInProgress::LoadFilament);
logic.LoadFilament(index);
manage_response(false, false);
Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
lcd_update_enable(true);
return true;
}
struct LoadingToNozzleRAII {
MMU2 &mmu2;
explicit inline LoadingToNozzleRAII(MMU2 &mmu2):mmu2(mmu2){
mmu2.loadingToNozzle = true;
}
inline ~LoadingToNozzleRAII(){
mmu2.loadingToNozzle = false;
}
};
bool MMU2::load_filament_to_nozzle(uint8_t index) {
if( ! WaitForMMUReady())
return false;
LoadingToNozzleRAII ln(*this);
WaitForHotendTargetTempBeep();
FullScreenMsg(_T(MSG_LOADING_FILAMENT), index);
{
// used for MMU-menu operation "Load to Nozzle"
ReportingRAII rep(CommandInProgress::ToolChange);
FSensorBlockRunout blockRunout;
if( extruder != MMU2_NO_TOOL ){ // we already have some filament loaded - free it + shape its tip properly
filament_ramming();
}
tool_change_extruder = index;
logic.ToolChange(index);
manage_response(true, true);
// The MMU's idler is disengaged at this point
// That means the MK3/S now has fully control
// reset current position to whatever the planner thinks it is
st_synchronize();
plan_set_e_position(current_position[E_AXIS]);
// Finish loading to the nozzle with finely tuned steps.
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, sizeof(load_to_nozzle_sequence) / sizeof (load_to_nozzle_sequence[0]));
extruder = index;
SpoolJoin::spooljoin.setSlot(index);
Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
}
lcd_update_enable(true);
return true;
}
bool MMU2::eject_filament(uint8_t index, bool recover) {
if( ! WaitForMMUReady())
return false;
ReportingRAII rep(CommandInProgress::EjectFilament);
current_position[E_AXIS] -= MMU2_FILAMENTCHANGE_EJECT_FEED;
plan_buffer_line_curposXYZE(2500.F / 60.F);
st_synchronize();
logic.EjectFilament(index);
manage_response(false, false);
if (recover) {
// LCD_MESSAGEPGM(MSG_MMU2_EJECT_RECOVER);
Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
//@@TODO wait_for_user = true;
//#if ENABLED(HOST_PROMPT_SUPPORT)
// host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), PSTR("Continue"));
//#endif
//#if ENABLED(EXTENSIBLE_UI)
// ExtUI::onUserConfirmRequired_P(PSTR("MMU2 Eject Recover"));
//#endif
//@@TODO while (wait_for_user) idle(true);
Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
// logic.Command(); //@@TODO command(MMU_CMD_R0);
manage_response(false, false);
}
// no active tool
extruder = MMU2_NO_TOOL;
tool_change_extruder = MMU2_NO_TOOL;
Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
// disable_E0();
return true;
}
void MMU2::Button(uint8_t index){
LogEchoEvent_P(PSTR("Button"));
logic.Button(index);
}
void MMU2::Home(uint8_t mode){
logic.Home(mode);
}
void MMU2::SaveAndPark(bool move_axes, bool turn_off_nozzle) {
if (mmu_print_saved == SavedState::None) { // First occurrence. Save current position, park print head, disable nozzle heater.
LogEchoEvent_P(PSTR("Saving and parking"));
st_synchronize();
resume_hotend_temp = degTargetHotend(active_extruder);
if (move_axes){
mmu_print_saved |= SavedState::ParkExtruder;
// save current pos
for(uint8_t i = 0; i < 3; ++i){
resume_position.xyz[i] = current_position[i];
}
// lift Z
raise_z(MMU_ERR_Z_PAUSE_LIFT);
// move XY aside
current_position[X_AXIS] = MMU_ERR_X_PAUSE_POS;
current_position[Y_AXIS] = MMU_ERR_Y_PAUSE_POS;
plan_buffer_line_curposXYZE(NOZZLE_PARK_XY_FEEDRATE);
st_synchronize();
}
if (turn_off_nozzle){
mmu_print_saved |= SavedState::CooldownPending;
LogEchoEvent_P(PSTR("Heater cooldown pending"));
// This just sets the flag that we should timeout and shut off the nozzle in 30 minutes...
//setAllTargetHotends(0);
}
}
// keep the motors powered forever (until some other strategy is chosen)
// @@TODO do we need that in 8bit?
// gcode.reset_stepper_timeout();
}
void MMU2::ResumeHotendTemp() {
if ((mmu_print_saved & SavedState::CooldownPending))
{
// Clear the "pending" flag if we haven't cooled yet.
mmu_print_saved &= ~(SavedState::CooldownPending);
LogEchoEvent_P(PSTR("Cooldown flag cleared"));
}
if ((mmu_print_saved & SavedState::Cooldown) && resume_hotend_temp) {
LogEchoEvent_P(PSTR("Resuming Temp"));
MMU2_ECHO_MSGRPGM(PSTR("Restoring hotend temperature "));
SERIAL_ECHOLN(resume_hotend_temp);
mmu_print_saved &= ~(SavedState::Cooldown);
setTargetHotend(resume_hotend_temp, active_extruder);
lcd_display_message_fullscreen_P(_i("MMU Retry: Restoring temperature...")); ////MSG_MMU_RESTORE_TEMP c=20 r=4
//@todo better report the event and let the GUI do its work somewhere else
ReportErrorHookSensorLineRender();
waitForHotendTargetTemp(1000, []{
ReportErrorHookDynamicRender();
manage_inactivity(true);
});
lcd_update_enable(true); // temporary hack to stop this locking the printer...
LogEchoEvent_P(PSTR("Hotend temperature reached"));
lcd_clear();
}
}
void MMU2::ResumeUnpark(){
if (mmu_print_saved & SavedState::ParkExtruder) {
LogEchoEvent_P(PSTR("Resuming XYZ"));
current_position[X_AXIS] = resume_position.xyz[X_AXIS];
current_position[Y_AXIS] = resume_position.xyz[Y_AXIS];
plan_buffer_line_curposXYZE(NOZZLE_PARK_XY_FEEDRATE);
st_synchronize();
current_position[Z_AXIS] = resume_position.xyz[Z_AXIS];
plan_buffer_line_curposXYZE(NOZZLE_PARK_Z_FEEDRATE);
st_synchronize();
mmu_print_saved &= ~(SavedState::ParkExtruder);
}
}
void MMU2::CheckUserInput(){
auto btn = ButtonPressed((uint16_t)lastErrorCode);
// Was a button pressed on the MMU itself instead of the LCD?
if (btn == Buttons::NoButton && lastButton != Buttons::NoButton){
btn = lastButton;
lastButton = Buttons::NoButton; // Clear it.
}
switch (btn) {
case Left:
case Middle:
case Right:
SERIAL_ECHOPGM("CheckUserInput-btnLMR ");
SERIAL_ECHOLN(btn);
ResumeHotendTemp(); // Recover the hotend temp before we attempt to do anything else...
Button(btn);
break;
case RestartMMU:
Reset(ResetPin); // we cannot do power cycle on the MK3
// ... but mmu2_power.cpp knows this and triggers a soft-reset instead.
break;
case DisableMMU:
Stop(); // Poweroff handles updating the EEPROM shutoff.
break;
case StopPrint:
// @@TODO not sure if we shall handle this high level operation at this spot
break;
default:
break;
}
}
/// Originally, this was used to wait for response and deal with timeout if necessary.
/// The new protocol implementation enables much nicer and intense reporting, so this method will boil down
/// just to verify the result of an issued command (which was basically the original idea)
///
/// It is closely related to mmu_loop() (which corresponds to our ProtocolLogic::Step()), which does NOT perform any blocking wait for a command to finish.
/// But - in case of an error, the command is not yet finished, but we must react accordingly - move the printhead elsewhere, stop heating, eat a cat or so.
/// That's what's being done here...
void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) {
mmu_print_saved = SavedState::None;
KEEPALIVE_STATE(IN_PROCESS);
LongTimer nozzleTimeout;
for (;;) {
// in our new implementation, we know the exact state of the MMU at any moment, we do not have to wait for a timeout
// So in this case we shall decide if the operation is:
// - still running -> wait normally in idle()
// - failed -> then do the safety moves on the printer like before
// - finished ok -> proceed with reading other commands
manage_heater();
manage_inactivity(true); // calls LogicStep() and remembers its return status
lcd_update(0);
if (mmu_print_saved & SavedState::CooldownPending){
if (!nozzleTimeout.running()){
nozzleTimeout.start();
LogEchoEvent_P(PSTR("Cooling Timeout started"));
} else if (nozzleTimeout.expired(DEFAULT_SAFETYTIMER_TIME_MINS*60*1000ul)){ // mins->msec. TODO: do we use the global or have our own independent timeout
mmu_print_saved &= ~(SavedState::CooldownPending);
mmu_print_saved |= SavedState::Cooldown;
setAllTargetHotends(0);
LogEchoEvent_P(PSTR("Heater cooldown"));
}
} else if (nozzleTimeout.running()) {
nozzleTimeout.stop();
LogEchoEvent_P(PSTR("Cooling timer stopped"));
}
switch (logicStepLastStatus) {
case Finished:
// command/operation completed, let Marlin continue its work
// the E may have some more moves to finish - wait for them
ResumeUnpark(); // We can now travel back to the tower or wherever we were when we saved.
ResetRetryAttempts(); // Reset the retry counter.
st_synchronize();
return;
case VersionMismatch: // this basically means the MMU will be disabled until reconnected
CheckUserInput();
return;
case CommandError:
// Don't proceed to the park/save if we are doing an autoretry.
if (inAutoRetry){
continue;
}
[[fallthrough]];
case CommunicationTimeout:
case ProtocolError:
SaveAndPark(move_axes, turn_off_nozzle); // and wait for the user to resolve the problem
CheckUserInput();
break;
case CommunicationRecovered: // @@TODO communication recovered and may be an error recovered as well
// may be the logic layer can detect the change of state a respond with one "Recovered" to be handled here
ResumeHotendTemp();
ResumeUnpark();
break;
case Processing: // wait for the MMU to respond
default:
break;
}
}
}
StepStatus MMU2::LogicStep() {
CheckUserInput(); // Process any buttons before proceeding with another MMU Query
StepStatus ss = logic.Step();
switch (ss) {
case Finished:
// At this point it is safe to trigger a runout and not interrupt the MMU protocol
CheckFINDARunout();
break;
case Processing:
OnMMUProgressMsg(logic.Progress());
break;
case CommandError:
ReportError(logic.Error(), ErrorSourceMMU);
break;
case CommunicationTimeout:
state = xState::Connecting;
ReportError(ErrorCode::MMU_NOT_RESPONDING, ErrorSourcePrinter);
break;
case ProtocolError:
state = xState::Connecting;
ReportError(ErrorCode::PROTOCOL_ERROR, ErrorSourcePrinter);
break;
case VersionMismatch:
StopKeepPowered();
ReportError(ErrorCode::VERSION_MISMATCH, ErrorSourcePrinter);
break;
case ButtonPushed:
lastButton = logic.Button();
LogEchoEvent_P(PSTR("MMU Button pushed"));
CheckUserInput(); // Process the button immediately
break;
default:
break;
}
if( logic.Running() ){
state = xState::Active;
}
return ss;
}
void MMU2::filament_ramming() {
execute_extruder_sequence((const E_Step *)ramming_sequence, sizeof(ramming_sequence) / sizeof(E_Step));
}
void MMU2::execute_extruder_sequence(const E_Step *sequence, uint8_t steps) {
st_synchronize();
const E_Step *step = sequence;
for (uint8_t i = 0; i < steps; i++) {
current_position[E_AXIS] += pgm_read_float(&(step->extrude));
plan_buffer_line_curposXYZE(pgm_read_float(&(step->feedRate)));
st_synchronize();
step++;
}
}
void MMU2::ReportError(ErrorCode ec, uint8_t res) {
// Due to a potential lossy error reporting layers linked to this hook
// we'd better report everything to make sure especially the error states
// do not get lost.
// - The good news here is the fact, that the MMU reports the errors repeatedly until resolved.
// - The bad news is, that MMU not responding may repeatedly occur on printers not having the MMU at all.
//
// Not sure how to properly handle this situation, options:
// - skip reporting "MMU not responding" (at least for now)
// - report only changes of states (we can miss an error message)
// - may be some combination of MMUAvailable + UseMMU flags and decide based on their state
// Right now the filtering of MMU_NOT_RESPONDING is done in ReportErrorHook() as it is not a problem if mmu2.cpp
// Depending on the Progress code, we may want to do some action when an error occurs
switch (logic.Progress()){
case ProgressCode::UnloadingToFinda:
unloadFilamentStarted = false;
break;
case ProgressCode::FeedingToFSensor:
// FSENSOR error during load. Make sure E-motor stops moving.
loadFilamentStarted = false;
break;
default:
break;
}
ReportErrorHook((uint16_t)ec, res);
if( ec != lastErrorCode ){ // deduplicate: only report changes in error codes into the log
lastErrorCode = ec;
LogErrorEvent_P( _O(PrusaErrorTitle(PrusaErrorCodeIndex((uint16_t)ec))) );
}
static_assert(mmu2Magic[0] == 'M'
&& mmu2Magic[1] == 'M'
&& mmu2Magic[2] == 'U'
&& mmu2Magic[3] == '2'
&& mmu2Magic[4] == ':'
&& strlen_constexpr(mmu2Magic) == 5,
"MMU2 logging prefix mismatch, must be updated at various spots"
);
}
void MMU2::ReportProgress(ProgressCode pc) {
ReportProgressHook((CommandInProgress)logic.CommandInProgress(), (uint16_t)pc);
LogEchoEvent_P( _O(ProgressCodeToText((uint16_t)pc)) );
}
void MMU2::OnMMUProgressMsg(ProgressCode pc){
if (pc != lastProgressCode) {
OnMMUProgressMsgChanged(pc);
} else {
OnMMUProgressMsgSame(pc);
}
}
void MMU2::OnMMUProgressMsgChanged(ProgressCode pc){
ReportProgress(pc);
lastProgressCode = pc;
switch (pc) {
case ProgressCode::UnloadingToFinda:
if ((CommandInProgress)logic.CommandInProgress() == CommandInProgress::UnloadFilament
|| ((CommandInProgress)logic.CommandInProgress() == CommandInProgress::ToolChange))
{
// If MK3S sent U0 command, ramming sequence takes care of releasing the filament.
// If Toolchange is done while printing, PrusaSlicer takes care of releasing the filament
// If printing is not in progress, ToolChange will issue a U0 command.
break;
} else {
// We're likely recovering from an MMU error
st_synchronize();
unloadFilamentStarted = true;
current_position[E_AXIS] -= MMU2_RETRY_UNLOAD_TO_FINDA_LENGTH;
plan_buffer_line_curposXYZE(MMU2_RETRY_UNLOAD_TO_FINDA_FEED_RATE);
}
break;
case ProgressCode::FeedingToFSensor:
// prepare for the movement of the E-motor
st_synchronize();
loadFilamentStarted = true;
break;
default:
// do nothing yet
break;
}
}
void MMU2::OnMMUProgressMsgSame(ProgressCode pc){
switch (pc) {
case ProgressCode::UnloadingToFinda:
if (unloadFilamentStarted && !blocks_queued()) { // Only plan a move if there is no move ongoing
if (fsensor.getFilamentPresent()) {
current_position[E_AXIS] -= MMU2_RETRY_UNLOAD_TO_FINDA_LENGTH;
plan_buffer_line_curposXYZE(MMU2_RETRY_UNLOAD_TO_FINDA_FEED_RATE);
} else {
unloadFilamentStarted = false;
}
}
break;
case ProgressCode::FeedingToFSensor:
if (loadFilamentStarted) {
switch (WhereIsFilament()) {
case FilamentState::AT_FSENSOR:
// fsensor triggered, finish FeedingToExtruder state
loadFilamentStarted = false;
// After the MMU knows the FSENSOR is triggered it will:
// 1. Push the filament by additional 30mm (see fsensorToNozzle)
// 2. Disengage the idler and push another 5mm.
current_position[E_AXIS] += 30.0f + 2.0f;
plan_buffer_line_curposXYZE(MMU2_LOAD_TO_NOZZLE_FEED_RATE);
break;
case FilamentState::NOT_PRESENT:
// fsensor not triggered, continue moving extruder
if (!blocks_queued()) { // Only plan a move if there is no move ongoing
current_position[E_AXIS] += 2.0f;
plan_buffer_line_curposXYZE(MMU2_LOAD_TO_NOZZLE_FEED_RATE);
}
break;
default:
// Abort here?
break;
}
}
break;
default:
// do nothing yet
break;
}
}
} // namespace MMU2
Reference in New Issue View Git Blame Copy Permalink