Prusa-Firmware/lang/po/Firmware.pot

#
msgid ""
msgstr ""
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. MSG_IR_03_OR_OLDER c=18
#: ../../Firmware/Filament_sensor.cpp:289
#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:171
msgid " 0.3 or older"
msgstr ""

#. MSG_IR_04_OR_NEWER c=18
#: ../../Firmware/Filament_sensor.cpp:291
#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:170
msgid " 0.4 or newer"
msgstr ""

#. MSG_SELFTEST_FS_LEVEL c=20
#: ../../Firmware/ultralcd.cpp:6885
msgid "%s level expected"
msgstr ""

#. MSG_CANCEL c=10
#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
#: ../../Firmware/ultralcd.cpp:3691
msgid ">Cancel"
msgstr ""

#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
#: ../../Firmware/ultralcd.cpp:2656
msgid "Adjusting Z:"
msgstr ""

#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ../../Firmware/ultralcd.cpp:7155
msgid "All correct"
msgstr ""

#. MSG_WIZARD_DONE c=20 r=3
#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4044
msgid "All is done. Happy printing!"
msgstr ""

#. MSG_SORT_ALPHA c=8
#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4656
msgid "Alphabet"
msgstr ""

#. MSG_ALWAYS c=6
#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4187
msgid "Always"
msgstr ""

#. MSG_AMBIENT c=14
#: ../../Firmware/ultralcd.cpp:1390
msgid "Ambient"
msgstr ""

#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
#: ../../Firmware/ultralcd.cpp:2878
msgid "Are left and right Z~carriages all up?"
msgstr ""

#. MSG_SOUND_BLIND c=7
#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4332
msgid "Assist"
msgstr ""

#. MSG_AUTO c=6
#: ../../Firmware/messages.cpp:167 ../../Firmware/ultralcd.cpp:5717
msgid "Auto"
msgstr ""

#. MSG_AUTO_HOME c=18
#: ../../Firmware/Marlin_main.cpp:3238 ../../Firmware/messages.cpp:9
#: ../../Firmware/ultralcd.cpp:4720
msgid "Auto home"
msgstr ""

#. MSG_AUTO_POWER c=10
#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4261
#: ../../Firmware/ultralcd.cpp:5632
msgid "Auto power"
msgstr ""

#. MSG_AUTOLOAD_FILAMENT c=18
#: ../../Firmware/ultralcd.cpp:5437
msgid "AutoLoad filament"
msgstr ""

#. MSG_AUTOLOADING_ENABLED c=20 r=4
#: ../../Firmware/ultralcd.cpp:2299
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
msgstr ""

#. MSG_PROGRESS_AVOID_GRIND c=20
#: ../../Firmware/mmu2_progress_converter.cpp:16
#: ../../Firmware/mmu2_progress_converter.cpp:42
msgid "Avoiding grind"
msgstr ""

#. MSG_SELFTEST_AXIS c=16
#: ../../Firmware/ultralcd.cpp:6864
msgid "Axis"
msgstr ""

#. MSG_SELFTEST_AXIS_LENGTH c=20
#: ../../Firmware/ultralcd.cpp:6863
msgid "Axis length"
msgstr ""

#. MSG_BACK c=18
#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:2729
#: ../../Firmware/ultralcd.cpp:4128 ../../Firmware/ultralcd.cpp:5714
#: ../../Firmware/ultralcd.cpp:7667
msgid "Back"
msgstr ""

#. MSG_BED c=13
#: ../../Firmware/Marlin_main.cpp:2032 ../../Firmware/Marlin_main.cpp:4625
#: ../../Firmware/Marlin_main.cpp:4677 ../../Firmware/messages.cpp:12
#: ../../Firmware/ultralcd.cpp:1388 ../../Firmware/ultralcd.cpp:5587
#: ../../Firmware/ultralcd.cpp:5738
msgid "Bed"
msgstr ""

#. MSG_BED_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6146 ../../Firmware/messages.cpp:14
#: ../../Firmware/ultralcd.cpp:540
msgid "Bed Heating"
msgstr ""

#. MSG_BED_DONE c=20
#: ../../Firmware/Marlin_main.cpp:6177 ../../Firmware/messages.cpp:13
#: ../../Firmware/ultralcd.cpp:543
msgid "Bed done"
msgstr ""

#. MSG_BED_CORRECTION_MENU c=18
#: ../../Firmware/ultralcd.cpp:4732
msgid "Bed level correct"
msgstr ""

#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
#: ../../Firmware/Marlin_main.cpp:2213 ../../Firmware/Marlin_main.cpp:2970
#: ../../Firmware/Marlin_main.cpp:2980
#: ../../Firmware/mesh_bed_calibration.cpp:2859
#: ../../Firmware/mesh_bed_calibration.cpp:2867
#: ../../Firmware/mesh_bed_calibration.cpp:2893 ../../Firmware/messages.cpp:15
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""

#. MSG_SELFTEST_BEDHEATER c=20
#: ../../Firmware/ultralcd.cpp:6821
msgid "Bed/Heater"
msgstr ""

#. MSG_BELT_STATUS c=18
#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1441
#: ../../Firmware/ultralcd.cpp:1710
msgid "Belt status"
msgstr ""

#. MSG_BELTTEST c=18
#: ../../Firmware/ultralcd.cpp:4722
msgid "Belt test"
msgstr ""

#. MSG_RECOVER_PRINT c=20 r=3
#: ../../Firmware/Marlin_main.cpp:1588 ../../Firmware/Marlin_main.cpp:1610
#: ../../Firmware/messages.cpp:81
msgid "Blackout occurred. Recover print?"
msgstr ""

#. MSG_BRIGHT c=6
#: ../../Firmware/messages.cpp:165 ../../Firmware/ultralcd.cpp:5717
msgid "Bright"
msgstr ""

#. MSG_BRIGHTNESS c=18
#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:4667
#: ../../Firmware/ultralcd.cpp:5642
msgid "Brightness"
msgstr ""

#. MSG_TITLE_COMMUNICATION_ERROR c=20
#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
msgid "COMMUNICATION ERROR"
msgstr ""

#. MSG_CALIBRATE_BED c=18
#: ../../Firmware/ultralcd.cpp:4726
msgid "Calibrate XYZ"
msgstr ""

#. MSG_HOMEYZ c=18
#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4728
msgid "Calibrate Z"
msgstr ""

#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ../../Firmware/ultralcd.cpp:2840
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""

#. MSG_CALIBRATE_Z_AUTO c=20 r=2
#: ../../Firmware/Marlin_main.cpp:2169 ../../Firmware/messages.cpp:19
#: ../../Firmware/ultralcd.cpp:582
msgid "Calibrating Z"
msgstr ""

#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ../../Firmware/ultralcd.cpp:2839
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""

#. MSG_CALIBRATING_HOME c=20
#: ../../Firmware/ultralcd.cpp:7157
msgid "Calibrating home"
msgstr ""

#. MSG_CALIBRATION c=18
#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:5447
msgid "Calibration"
msgstr ""

#. MSG_HOMEYZ_DONE c=20
#: ../../Firmware/ultralcd.cpp:593
msgid "Calibration done"
msgstr ""

#. MSG_DESC_CANNOT_MOVE c=20 r=4
#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
#: ../../Firmware/mmu2/errors_list.h:287
msgid "Can't move Selector or Idler."
msgstr ""

#. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
msgid ""
"Cannot perform the action, filament is already loaded. Unload it first."
msgstr ""

#. MSG_SD_REMOVED c=20
#: ../../Firmware/ultralcd.cpp:7554
msgid "Card removed"
msgstr ""

#. MSG_CNG_SDCARD c=18
#: ../../Firmware/ultralcd.cpp:5401
msgid "Change SD card"
msgstr ""

#. MSG_FILAMENTCHANGE c=18
#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5355
#: ../../Firmware/ultralcd.cpp:5596
msgid "Change filament"
msgstr ""

#. MSG_CHANGE_SUCCESS c=20
#: ../../Firmware/ultralcd.cpp:2177
msgid "Change success!"
msgstr ""

#. MSG_CORRECTLY c=20
#: ../../Firmware/ultralcd.cpp:2225
msgid "Changed correctly?"
msgstr ""

#. MSG_CHECKING_X c=20
#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6036
#: ../../Firmware/ultralcd.cpp:7147
msgid "Checking X axis"
msgstr ""

#. MSG_CHECKING_Y c=20
#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6045
#: ../../Firmware/ultralcd.cpp:7148
msgid "Checking Y axis"
msgstr ""

#. MSG_SELFTEST_CHECK_Z c=20
#: ../../Firmware/ultralcd.cpp:7149
msgid "Checking Z axis"
msgstr ""

#. MSG_SELFTEST_CHECK_BED c=20
#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7150
msgid "Checking bed"
msgstr ""

#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:7146
msgid "Checking endstops"
msgstr ""

#. MSG_CHECKING_FILE c=17
#: ../../Firmware/ultralcd.cpp:7244
msgid "Checking file"
msgstr ""

#. MSG_SELFTEST_CHECK_HOTEND c=20
#: ../../Firmware/ultralcd.cpp:7152
msgid "Checking hotend"
msgstr ""

#. MSG_SELFTEST_CHECK_FSENSOR c=20
#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7153
#: ../../Firmware/ultralcd.cpp:7154
msgid "Checking sensors"
msgstr ""

#. MSG_CHECKS c=18
#: ../../Firmware/ultralcd.cpp:4560
msgid "Checks"
msgstr ""

#. MSG_TM_ACK_ERROR c=18
#: ../../Firmware/messages.cpp:178 ../../Firmware/ultralcd.cpp:5390
msgid "Clear TM error"
msgstr ""

#. MSG_NOT_COLOR c=19
#: ../../Firmware/ultralcd.cpp:2228
msgid "Color not correct"
msgstr ""

#. MSG_COMMUNITY_MADE c=18
#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3581
msgid "Community made"
msgstr ""

#. MSG_CONTINUE_SHORT c=5
#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4150
msgid "Cont."
msgstr ""

#. MSG_COOLDOWN c=18
#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2136
msgid "Cooldown"
msgstr ""

#. MSG_COPY_SEL_LANG c=20 r=3
#: ../../Firmware/ultralcd.cpp:3519
msgid "Copy selected language?"
msgstr ""

#. MSG_CRASH c=7
#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1231
#: ../../Firmware/ultralcd.cpp:1260
msgid "Crash"
msgstr ""

#. MSG_CRASHDETECT c=13
#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4238
#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4241
#: ../../Firmware/ultralcd.cpp:5618 ../../Firmware/ultralcd.cpp:5620
#: ../../Firmware/ultralcd.cpp:5624
msgid "Crash det."
msgstr ""

#. MSG_CRASH_DETECTED c=20
#: ../../Firmware/Marlin_main.cpp:568 ../../Firmware/messages.cpp:27
msgid "Crash detected."
msgstr ""

#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:3423
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr ""

#. MSG_CUT_FILAMENT c=17
#: ../../Firmware/messages.cpp:60 ../../Firmware/mmu2_reporting.cpp:327
#: ../../Firmware/ultralcd.cpp:5007 ../../Firmware/ultralcd.cpp:5431
msgid "Cut filament"
msgstr ""

#. MSG_CUTTER c=9
#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4182
#: ../../Firmware/ultralcd.cpp:4187 ../../Firmware/ultralcd.cpp:4192
msgid "Cutter"
msgstr ""

#. MSG_DATE c=17
#: ../../Firmware/ultralcd.cpp:1651
msgid "Date:"
msgstr ""

#. MSG_DIM c=6
#: ../../Firmware/messages.cpp:166 ../../Firmware/ultralcd.cpp:5717
msgid "Dim"
msgstr ""

#. MSG_BTN_DISABLE_MMU c=8
#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
msgid "Disable"
msgstr ""

#. MSG_DISABLE_STEPPERS c=18
#: ../../Firmware/ultralcd.cpp:4596
msgid "Disable steppers"
msgstr ""

#. MSG_PROGRESS_DISENGAGE_IDLER c=20
#: ../../Firmware/mmu2_progress_converter.cpp:10
#: ../../Firmware/mmu2_progress_converter.cpp:36
#: ../../Firmware/mmu2_progress_converter.cpp:44
msgid "Disengaging idler"
msgstr ""

#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: ../../Firmware/Marlin_main.cpp:1556 ../../Firmware/Marlin_main.cpp:3374
#: ../../Firmware/messages.cpp:11
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet."
" Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""

#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:4012
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""

#. MSG_BTN_CONTINUE c=8
#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
msgid "Done"
msgstr ""

#. MSG_EXTRUDER_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4081
msgid "E-correct"
msgstr ""

#. MSG_PROGRESS_ERR_HELP_FIL c=20
#: ../../Firmware/mmu2_progress_converter.cpp:19
#: ../../Firmware/mmu2_progress_converter.cpp:48
msgid "ERR Help filament"
msgstr ""

#. MSG_PROGRESS_ERR_INTERNAL c=20
#: ../../Firmware/mmu2_progress_converter.cpp:18
#: ../../Firmware/mmu2_progress_converter.cpp:47
msgid "ERR Internal"
msgstr ""

#. MSG_PROGRESS_ERR_TMC c=20
#: ../../Firmware/mmu2_progress_converter.cpp:20
#: ../../Firmware/mmu2_progress_converter.cpp:49
msgid "ERR TMC failed"
msgstr ""

#. MSG_PROGRESS_WAIT_USER c=20
#: ../../Firmware/mmu2_progress_converter.cpp:17
#: ../../Firmware/mmu2_progress_converter.cpp:46
msgid "ERR Wait for User"
msgstr ""

#. MSG_ERROR c=10
#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2280
msgid "ERROR:"
msgstr ""

#. MSG_EJECT_FROM_MMU c=16
#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2_reporting.cpp:331
#: ../../Firmware/ultralcd.cpp:4989 ../../Firmware/ultralcd.cpp:5428
msgid "Eject from MMU"
msgstr ""

#. MSG_PROGRESS_EJECT_FILAMENT c=20
#. @@todo duplicate
#: ../../Firmware/mmu2_progress_converter.cpp:27
#: ../../Firmware/mmu2_progress_converter.cpp:58
msgid "Ejecting filament"
msgstr ""

#. MSG_SELFTEST_ENDSTOP c=16
#: ../../Firmware/ultralcd.cpp:6834
msgid "Endstop"
msgstr ""

#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
#: ../../Firmware/ultralcd.cpp:6839
msgid "Endstop not hit"
msgstr ""

#. MSG_SELFTEST_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:6825
msgid "Endstops"
msgstr ""

#. MSG_PROGRESS_ENGAGE_IDLER c=20
#: ../../Firmware/mmu2_progress_converter.cpp:9
#: ../../Firmware/mmu2_progress_converter.cpp:35
#: ../../Firmware/mmu2_progress_converter.cpp:45
msgid "Engaging idler"
msgstr ""

#. MSG_EXTRUDER c=17
#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:3397
msgid "Extruder"
msgstr ""

#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1706
msgid "Extruder info"
msgstr ""

#. MSG_FSENSOR_AUTOLOAD c=13
#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4135
#: ../../Firmware/ultralcd.cpp:4142
msgid "F. autoload"
msgstr ""

#. MSG_FSENSOR_JAM_DETECTION c=13
#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4137
#: ../../Firmware/ultralcd.cpp:4144
msgid "F. jam detect"
msgstr ""

#. MSG_FSENSOR_RUNOUT c=13
#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4134
#: ../../Firmware/ultralcd.cpp:4141
msgid "F. runout"
msgstr ""

#. MSG_TITLE_FIL_ALREADY_LOADED c=20
#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
msgid "FILAMENT ALREADY LOA"
msgstr ""

#. MSG_TITLE_FILAMENT_EJECTED c=20
#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
msgid "FILAMENT EJECTED"
msgstr ""

#. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
msgid "FINDA DIDNT TRIGGER"
msgstr ""

#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
msgid ""
"FINDA didn't switch off while unloading filament. Try unloading manually. "
"Ensure filament can move and FINDA works."
msgstr ""

#. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
msgid ""
"FINDA didn't trigger while loading the filament. Ensure the filament can "
"move and FINDA works."
msgstr ""

#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
msgid "FINDA: FILAM. STUCK"
msgstr ""

#. MSG_FS_ACTION c=10
#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:4150
#: ../../Firmware/ultralcd.cpp:4153
msgid "FS Action"
msgstr ""

#. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
msgid "FSENSOR DIDNT TRIGG."
msgstr ""

#. MSG_TITLE_FSENSOR_TOO_EARLY c=20
#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
msgid "FSENSOR TOO EARLY"
msgstr ""

#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
msgid "FSENSOR: FIL. STUCK"
msgstr ""

#. MSG_TITLE_FW_RUNTIME_ERROR c=20
#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
msgid "FW RUNTIME ERROR"
msgstr ""

#. MSG_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:5455
msgid "Fail stats"
msgstr ""

#. MSG_MMU_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:5458
msgid "Fail stats MMU"
msgstr ""

#. MSG_FALSE_TRIGGERING c=20
#: ../../Firmware/ultralcd.cpp:6880
msgid "False triggering"
msgstr ""

#. MSG_FAN_SPEED c=14
#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5589
#: ../../Firmware/ultralcd.cpp:5740
msgid "Fan speed"
msgstr ""

#. MSG_SELFTEST_FAN c=20
#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6989
#: ../../Firmware/ultralcd.cpp:7143 ../../Firmware/ultralcd.cpp:7144
#: ../../Firmware/ultralcd.cpp:7145
msgid "Fan test"
msgstr ""

#. MSG_FANS_CHECK c=13
#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4618
#: ../../Firmware/ultralcd.cpp:5609
msgid "Fans check"
msgstr ""

#. MSG_PROGRESS_FEED_FINDA c=20
#: ../../Firmware/mmu2_progress_converter.cpp:13
#: ../../Firmware/mmu2_progress_converter.cpp:39
msgid "Feeding to FINDA"
msgstr ""

#. MSG_PROGRESS_FEED_FSENSOR c=20
#: ../../Firmware/mmu2_progress_converter.cpp:31
#: ../../Firmware/mmu2_progress_converter.cpp:62
msgid "Feeding to FSensor"
msgstr ""

#. MSG_PROGRESS_FEED_EXTRUDER c=20
#: ../../Firmware/mmu2_progress_converter.cpp:14
#: ../../Firmware/mmu2_progress_converter.cpp:40
msgid "Feeding to extruder"
msgstr ""

#. MSG_PROGRESS_FEED_NOZZLE c=20
#: ../../Firmware/mmu2_progress_converter.cpp:15
#: ../../Firmware/mmu2_progress_converter.cpp:41
msgid "Feeding to nozzle"
msgstr ""

#. MSG_FIL_RUNOUTS c=15
#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1230
#: ../../Firmware/ultralcd.cpp:1259 ../../Firmware/ultralcd.cpp:1313
#: ../../Firmware/ultralcd.cpp:1315
msgid "Fil. runouts"
msgstr ""

#. MSG_FSENSOR c=12
#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3358
#: ../../Firmware/ultralcd.cpp:4130 ../../Firmware/ultralcd.cpp:4600
#: ../../Firmware/ultralcd.cpp:5600
msgid "Fil. sensor"
msgstr ""

#. MSG_FILAMENT c=17
#: ../../Firmware/Marlin_main.cpp:3472 ../../Firmware/Tcodes.cpp:32
#: ../../Firmware/Tcodes.cpp:47 ../../Firmware/messages.cpp:33
#: ../../Firmware/ultralcd.cpp:3691
msgid "Filament"
msgstr ""

#. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
msgid ""
"Filament detected unexpectedly. Ensure no filament is loaded. Check the "
"sensors and wiring."
msgstr ""

#. MSG_FILAMENT_CLEAN c=20 r=3
#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2288
#: ../../Firmware/ultralcd.cpp:2292
msgid "Filament extruding & with correct color?"
msgstr ""

#. MSG_NOT_LOADED c=19
#: ../../Firmware/ultralcd.cpp:2227
msgid "Filament not loaded"
msgstr ""

#. MSG_SELFTEST_FILAMENT_SENSOR c=17
#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:6875
#: ../../Firmware/ultralcd.cpp:6879 ../../Firmware/ultralcd.cpp:6883
#: ../../Firmware/ultralcd.cpp:7172
msgid "Filament sensor"
msgstr ""

#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
msgid ""
"Filament sensor didn't switch off while unloading filament. Ensure filament "
"can move and the sensor works."
msgstr ""

#. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
msgid ""
"Filament sensor didn't trigger while loading the filament. Ensure the "
"filament reached the fsensor and the sensor works."
msgstr ""

#. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
msgid ""
"Filament sensor triggered too early while loading to extruder. Check there "
"isn't anything stuck in PTFE tube. Check that sensor reads properly."
msgstr ""

#. MSG_FILAMENT_USED c=19
#: ../../Firmware/ultralcd.cpp:2361
msgid "Filament used"
msgstr ""

#. MSG_FILE_INCOMPLETE c=20 r=3
#: ../../Firmware/ultralcd.cpp:7302
msgid "File incomplete. Continue anyway?"
msgstr ""

#. MSG_FINISHING_MOVEMENTS c=20
#: ../../Firmware/messages.cpp:41
#: ../../Firmware/mmu2_progress_converter.cpp:43
#: ../../Firmware/ultralcd.cpp:5169 ../../Firmware/ultralcd.cpp:5496
msgid "Finishing movements"
msgstr ""

#. MSG_V2_CALIBRATION c=18
#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4718
#: ../../Firmware/ultralcd.cpp:5282
msgid "First layer cal."
msgstr ""

#. MSG_WIZARD_SELFTEST c=20 r=8
#: ../../Firmware/ultralcd.cpp:3933
msgid "First, I will run the selftest to check most common assembly problems."
msgstr ""

#. MSG_FLOW c=15
#: ../../Firmware/ultralcd.cpp:5590
msgid "Flow"
msgstr ""

#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
#: ../../Firmware/messages.cpp:182 ../../Firmware/ultralcd.cpp:985
msgid ""
"For a Nozzle change please read\n"
"prusa.io/nozzle-mk3s"
msgstr ""

#. MSG_SELFTEST_PART_FAN c=20
#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6845
#: ../../Firmware/ultralcd.cpp:6995 ../../Firmware/ultralcd.cpp:7000
msgid "Front print fan?"
msgstr ""

#. MSG_BED_CORRECTION_FRONT c=14
#: ../../Firmware/ultralcd.cpp:2732
msgid "Front side[µm]"
msgstr ""

#. MSG_SELFTEST_FANS c=20
#: ../../Firmware/ultralcd.cpp:6869
msgid "Front/left fans"
msgstr ""

#. MSG_GCODE_DIFF_CONTINUE c=20 r=3
#: ../../Firmware/messages.cpp:139 ../../Firmware/util.cpp:403
msgid "G-code sliced for a different level. Continue?"
msgstr ""

#. MSG_GCODE_DIFF_CANCELLED c=20 r=8
#: ../../Firmware/messages.cpp:140 ../../Firmware/util.cpp:404
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""

#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=3
#: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:333
#: ../../Firmware/util.cpp:439
msgid "G-code sliced for a different printer type. Continue?"
msgstr ""

#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
#: ../../Firmware/messages.cpp:136 ../../Firmware/util.cpp:334
#: ../../Firmware/util.cpp:440
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again."
" Print cancelled."
msgstr ""

#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=3
#: ../../Firmware/messages.cpp:137 ../../Firmware/util.cpp:383
msgid "G-code sliced for a newer firmware. Continue?"
msgstr ""

#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
#: ../../Firmware/messages.cpp:138 ../../Firmware/util.cpp:384
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""

#. MSG_HW_SETUP c=18
#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4502
#: ../../Firmware/ultralcd.cpp:4519 ../../Firmware/ultralcd.cpp:4625
msgid "HW Setup"
msgstr ""

#. MSG_SELFTEST_HEATERTHERMISTOR c=20
#: ../../Firmware/ultralcd.cpp:6817
msgid "Heater/Thermistor"
msgstr ""

#. MSG_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6089 ../../Firmware/messages.cpp:48
#: ../../Firmware/ultralcd.cpp:532
msgid "Heating"
msgstr ""

#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:9370
msgid "Heating disabled by safety timer."
msgstr ""

#. MSG_HEATING_COMPLETE c=20
#: ../../Firmware/Marlin_main.cpp:6120 ../../Firmware/messages.cpp:49
#: ../../Firmware/ultralcd.cpp:535
msgid "Heating done."
msgstr ""

#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:3893
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""

#. MSG_WIZARD_WELCOME c=20 r=7
#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3897
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
msgstr ""

#. MSG_HIGH_POWER c=10
#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4255
#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:5630
#: ../../Firmware/ultralcd.cpp:5633
msgid "High power"
msgstr ""

#. MSG_PROGRESS_HOMING c=20
#: ../../Firmware/mmu2_progress_converter.cpp:29
#: ../../Firmware/mmu2_progress_converter.cpp:60
msgid "Homing"
msgstr ""

#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
#: ../../Firmware/messages.cpp:183 ../../Firmware/ultralcd.cpp:1005
msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
msgstr ""

#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1102
#: ../../Firmware/ultralcd.cpp:7163
msgid "Hotend fan:"
msgstr ""

#. MSG_WIZARD_XYZ_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:3938
msgid "I will run xyz calibration now. It will take up to 24 mins."
msgstr ""

#. MSG_WIZARD_Z_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:3949
msgid "I will run z calibration now."
msgstr ""

#. MSG_TITLE_IDLER_CANNOT_HOME c=20
#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
msgid "IDLER CANNOT HOME"
msgstr ""

#. MSG_TITLE_IDLER_CANNOT_MOVE c=20
#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
msgid "IDLER CANNOT MOVE"
msgstr ""

#. MSG_TITLE_INSPECT_FINDA c=20
#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
msgid "INSPECT FINDA"
msgstr ""

#. MSG_TITLE_INVALID_TOOL c=20
#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
msgid "INVALID TOOL"
msgstr ""

#. MSG_ADDITIONAL_SHEETS c=20 r=8
#: ../../Firmware/ultralcd.cpp:4020
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""

#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
msgstr ""

#. MSG_INFO_SCREEN c=18
#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:5336
msgid "Info screen"
msgstr ""

#. MSG_INIT_SDCARD c=18
#: ../../Firmware/ultralcd.cpp:5408
msgid "Init. SD card"
msgstr ""

#. MSG_INSERT_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2163
msgid "Insert filament"
msgstr ""

#. MSG_INSERT_FIL c=20 r=6
#: ../../Firmware/ultralcd.cpp:6082
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""

#. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
msgid ""
"Internal runtime error. Try resetting the MMU or updating the firmware."
msgstr ""

#. MSG_FILAMENT_LOADED c=20 r=3
#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3712
#: ../../Firmware/ultralcd.cpp:3979
msgid "Is filament loaded?"
msgstr ""

#. MSG_STEEL_SHEET_CHECK c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3278 ../../Firmware/Marlin_main.cpp:4744
#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:3945
msgid "Is steel sheet on heatbed?"
msgstr ""

#. MSG_ITERATION c=12
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:51
msgid "Iteration"
msgstr ""

#. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
msgid "LOAD TO EXTR. FAILED"
msgstr ""

#. MSG_LAST_PRINT c=18
#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1124
#: ../../Firmware/ultralcd.cpp:1283
msgid "Last print"
msgstr ""

#. MSG_LAST_PRINT_FAILURES c=20
#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1148
#: ../../Firmware/ultralcd.cpp:1257 ../../Firmware/ultralcd.cpp:1312
msgid "Last print failures"
msgstr ""

#. MSG_LEFT c=10
#: ../../Firmware/ultralcd.cpp:2492
msgid "Left"
msgstr ""

#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6851
#: ../../Firmware/ultralcd.cpp:6995 ../../Firmware/ultralcd.cpp:7000
msgid "Left hotend fan?"
msgstr ""

#. MSG_BED_CORRECTION_LEFT c=14
#: ../../Firmware/ultralcd.cpp:2730
msgid "Left side [µm]"
msgstr ""

#. MSG_BL_HIGH c=12
#: ../../Firmware/messages.cpp:162 ../../Firmware/ultralcd.cpp:5715
msgid "Level Bright"
msgstr ""

#. MSG_BL_LOW c=12
#: ../../Firmware/messages.cpp:163 ../../Firmware/ultralcd.cpp:5716
msgid "Level Dimmed"
msgstr ""

#. MSG_LIN_CORRECTION c=18
#: ../../Firmware/ultralcd.cpp:4631
msgid "Lin. correction"
msgstr ""

#. MSG_BABYSTEP_Z c=18
#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4642
#: ../../Firmware/ultralcd.cpp:5351
msgid "Live adjust Z"
msgstr ""

#. MSG_LOAD_ALL c=18
#: ../../Firmware/messages.cpp:180 ../../Firmware/ultralcd.cpp:4950
#: ../../Firmware/ultralcd.cpp:5030
msgid "Load All"
msgstr ""

#. MSG_LOAD_FILAMENT c=17
#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:4952
#: ../../Firmware/ultralcd.cpp:4971 ../../Firmware/ultralcd.cpp:5032
#: ../../Firmware/ultralcd.cpp:5425 ../../Firmware/ultralcd.cpp:5442
msgid "Load filament"
msgstr ""

#. MSG_LOAD_TO_NOZZLE c=18
#: ../../Firmware/ultralcd.cpp:5426
msgid "Load to nozzle"
msgstr ""

#. MSG_LOADING_TEST c=18
#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:4313
msgid "Loading Test"
msgstr ""

#. MSG_LOADING_COLOR c=20
#: ../../Firmware/ultralcd.cpp:2199
msgid "Loading color"
msgstr ""

#. MSG_LOADING_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3606 ../../Firmware/messages.cpp:57
#: ../../Firmware/mmu2_progress_converter.cpp:51
#: ../../Firmware/mmu2_reporting.cpp:339 ../../Firmware/ultralcd.cpp:2210
#: ../../Firmware/ultralcd.cpp:3803
msgid "Loading filament"
msgstr ""

#. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
msgid ""
"Loading to extruder failed. Inspect the filament tip shape. Refine the "
"sensor calibration, if needed."
msgstr ""

#. MSG_LOOSE_PULLEY c=20
#: ../../Firmware/ultralcd.cpp:6857
msgid "Loose pulley"
msgstr ""

#. MSG_SOUND_LOUD c=7
#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4323
#: ../../Firmware/ultralcd.cpp:4335
msgid "Loud"
msgstr ""

#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
msgid "MCU UNDERVOLTAGE VCC"
msgstr ""

#. MSG_TITLE_FW_UPDATE_NEEDED c=20
#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
msgid "MMU FW UPDATE NEEDED"
msgstr ""

#. MSG_DESC_QUEUE_FULL c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
msgid "MMU Firmware internal error, please reset the MMU."
msgstr ""

#. MSG_MMU_MODE c=8
#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4278
#: ../../Firmware/ultralcd.cpp:4279
msgid "MMU Mode"
msgstr ""

#. MSG_TITLE_MMU_NOT_RESPONDING c=20
#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
msgid "MMU NOT RESPONDING"
msgstr ""

#. MSG_MMU_RESTORE_TEMP c=20 r=4
#: ../../Firmware/mmu2_reporting.cpp:343
msgid "MMU Retry: Restoring temperature..."
msgstr ""

#. MSG_TITLE_SELFTEST_FAILED c=20
#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
msgid "MMU SELFTEST FAILED"
msgstr ""

#. MSG_MMU_CONNECTED c=18
#: ../../Firmware/ultralcd.cpp:1663
msgid "MMU connected"
msgstr ""

#. MSG_MMU_FAILS c=15
#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1149
#: ../../Firmware/ultralcd.cpp:1174
msgid "MMU fails"
msgstr ""

#. MSG_MMU_LOAD_FAILS c=15
#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1150
#: ../../Firmware/ultralcd.cpp:1175
msgid "MMU load fails"
msgstr ""

#. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
msgid "MMU not responding correctly. Check the wiring and connectors."
msgstr ""

#. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
msgid "MMU not responding. Check the wiring and connectors."
msgstr ""

#. MSG_MMU_POWER_FAILS c=15
#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1176
msgid "MMU power fails"
msgstr ""

#. MSG_MAGNETS_COMP c=13
#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5689
msgid "Magnets comp."
msgstr ""

#. MSG_MAIN c=18
#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:1123
#: ../../Firmware/ultralcd.cpp:1282 ../../Firmware/ultralcd.cpp:1324
#: ../../Firmware/ultralcd.cpp:1628 ../../Firmware/ultralcd.cpp:4589
#: ../../Firmware/ultralcd.cpp:4712 ../../Firmware/ultralcd.cpp:4949
#: ../../Firmware/ultralcd.cpp:4969 ../../Firmware/ultralcd.cpp:4987
#: ../../Firmware/ultralcd.cpp:5005 ../../Firmware/ultralcd.cpp:5029
#: ../../Firmware/ultralcd.cpp:5583
msgid "Main"
msgstr ""

#. MSG_MATERIAL_CHANGES c=18
#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1126
#: ../../Firmware/ultralcd.cpp:1200
msgid "Material changes"
msgstr ""

#. MSG_MEASURED_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2533
msgid "Measured skew"
msgstr ""

#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3259
#: ../../Firmware/mesh_bed_calibration.cpp:2837 ../../Firmware/messages.cpp:65
msgid "Measuring reference height of calibration point"
msgstr ""

#. MSG_MESH c=12
#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5685
msgid "Mesh"
msgstr ""

#. MSG_MESH_BED_LEVELING c=18
#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4628
#: ../../Firmware/ultralcd.cpp:4730
msgid "Mesh Bed Leveling"
msgstr ""

#. MSG_MODE c=6
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4233
#: ../../Firmware/ultralcd.cpp:4235 ../../Firmware/ultralcd.cpp:4255
#: ../../Firmware/ultralcd.cpp:4258 ../../Firmware/ultralcd.cpp:4261
#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:5616
#: ../../Firmware/ultralcd.cpp:5623 ../../Firmware/ultralcd.cpp:5630
#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5632
#: ../../Firmware/ultralcd.cpp:5633 ../../Firmware/ultralcd.cpp:5717
msgid "Mode"
msgstr ""

#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
#: ../../Firmware/ultralcd.cpp:3472
msgid "Mode change in progress..."
msgstr ""

#. MSG_MODEL c=8
#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4446
#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
#: ../../Firmware/ultralcd.cpp:4455
msgid "Model"
msgstr ""

#. MSG_DESC_TMC c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
#: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
#: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
#: ../../Firmware/mmu2/errors_list.h:309
msgid "More details online."
msgstr ""

#. MSG_SELFTEST_MOTOR c=18
#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6831
#: ../../Firmware/ultralcd.cpp:6840 ../../Firmware/ultralcd.cpp:6858
msgid "Motor"
msgstr ""

#. MSG_MOVE_X c=18
#: ../../Firmware/ultralcd.cpp:3394
msgid "Move X"
msgstr ""

#. MSG_MOVE_Y c=18
#: ../../Firmware/ultralcd.cpp:3395
msgid "Move Y"
msgstr ""

#. MSG_MOVE_Z c=18
#: ../../Firmware/ultralcd.cpp:3396
msgid "Move Z"
msgstr ""

#. MSG_MOVE_AXIS c=18
#: ../../Firmware/ultralcd.cpp:4595
msgid "Move axis"
msgstr ""

#. MSG_PROGRESS_MOVING_SELECTOR c=20
#: ../../Firmware/mmu2_progress_converter.cpp:30
#: ../../Firmware/mmu2_progress_converter.cpp:61
msgid "Moving selector"
msgstr ""

#. MSG_NA c=3
#: ../../Firmware/menu.cpp:178 ../../Firmware/messages.cpp:129
#: ../../Firmware/ultralcd.cpp:2498 ../../Firmware/ultralcd.cpp:2542
#: ../../Firmware/ultralcd.cpp:3319 ../../Firmware/ultralcd.cpp:4134
#: ../../Firmware/ultralcd.cpp:4135 ../../Firmware/ultralcd.cpp:4137
#: ../../Firmware/ultralcd.cpp:5689
msgid "N/A"
msgstr ""

#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
#: ../../Firmware/util.cpp:213
msgid "New firmware version available:"
msgstr ""

#. MSG_NO c=4
#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:3066
#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4672
#: ../../Firmware/ultralcd.cpp:5874
msgid "No"
msgstr ""

#. MSG_NO_CARD c=18
#: ../../Firmware/ultralcd.cpp:5406
msgid "No SD card"
msgstr ""

#. MSG_NO_MOVE c=20
#: ../../Firmware/Marlin_main.cpp:5296
msgid "No move."
msgstr ""

#. MSG_NONE c=8
#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4366
#: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:4446
#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4485
#: ../../Firmware/ultralcd.cpp:4494 ../../Firmware/ultralcd.cpp:4657
msgid "None"
msgstr ""

#. MSG_NORMAL c=7
#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4233
#: ../../Firmware/ultralcd.cpp:4278 ../../Firmware/ultralcd.cpp:4652
#: ../../Firmware/ultralcd.cpp:5616
msgid "Normal"
msgstr ""

#. MSG_SELFTEST_NOTCONNECTED c=20
#: ../../Firmware/ultralcd.cpp:6818
msgid "Not connected"
msgstr ""

#. MSG_SELFTEST_FAN_NO c=19
#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7014
#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7037
msgid "Not spinning"
msgstr ""

#. MSG_WIZARD_V2_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:3813
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr ""

#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:3958
msgid "Now I will preheat nozzle for PLA."
msgstr ""

#. MSG_REMOVE_TEST_PRINT c=20 r=4
#: ../../Firmware/ultralcd.cpp:3944
msgid "Now remove the test print from steel sheet."
msgstr ""

#. MSG_NOZZLE c=10
#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1387
#: ../../Firmware/ultralcd.cpp:4366 ../../Firmware/ultralcd.cpp:4369
#: ../../Firmware/ultralcd.cpp:4372 ../../Firmware/ultralcd.cpp:4375
#: ../../Firmware/ultralcd.cpp:5586 ../../Firmware/ultralcd.cpp:5729
msgid "Nozzle"
msgstr ""

#. MSG_NOZZLE_CNG_MENU c=18
#: ../../Firmware/messages.cpp:181 ../../Firmware/ultralcd.cpp:4559
#: ../../Firmware/ultralcd.cpp:4626
msgid "Nozzle change"
msgstr ""

#. MSG_NOZZLE_DIAMETER c=10
#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4412
#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:4415
#: ../../Firmware/ultralcd.cpp:4416
msgid "Nozzle d."
msgstr ""

#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=3
#: ../../Firmware/messages.cpp:141 ../../Firmware/util.cpp:310
msgid "Nozzle diameter differs from the G-code. Continue?"
msgstr ""

#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=8
#: ../../Firmware/messages.cpp:142 ../../Firmware/util.cpp:311
msgid ""
"Nozzle diameter differs from the G-code. Please check the value in settings."
" Print cancelled."
msgstr ""

#. MSG_PROGRESS_OK c=4
#: ../../Firmware/mmu2_progress_converter.cpp:8
#: ../../Firmware/mmu2_progress_converter.cpp:34
msgid "OK"
msgstr ""

#. MSG_OFF c=3
#: ../../Firmware/SpoolJoin.cpp:25 ../../Firmware/menu.cpp:462
#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4130
#: ../../Firmware/ultralcd.cpp:4141 ../../Firmware/ultralcd.cpp:4142
#: ../../Firmware/ultralcd.cpp:4144 ../../Firmware/ultralcd.cpp:4167
#: ../../Firmware/ultralcd.cpp:4192 ../../Firmware/ultralcd.cpp:4239
#: ../../Firmware/ultralcd.cpp:4603 ../../Firmware/ultralcd.cpp:4618
#: ../../Firmware/ultralcd.cpp:4635 ../../Firmware/ultralcd.cpp:4638
#: ../../Firmware/ultralcd.cpp:5510 ../../Firmware/ultralcd.cpp:5609
#: ../../Firmware/ultralcd.cpp:5620 ../../Firmware/ultralcd.cpp:5689
#: ../../Firmware/ultralcd.cpp:7670 ../../Firmware/ultralcd.cpp:7674
msgid "Off"
msgstr ""

#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
#: ../../Firmware/Marlin_main.cpp:1508
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""

#. MSG_ON c=3
#: ../../Firmware/SpoolJoin.cpp:23 ../../Firmware/messages.cpp:128
#: ../../Firmware/ultralcd.cpp:4130 ../../Firmware/ultralcd.cpp:4141
#: ../../Firmware/ultralcd.cpp:4142 ../../Firmware/ultralcd.cpp:4144
#: ../../Firmware/ultralcd.cpp:4167 ../../Firmware/ultralcd.cpp:4182
#: ../../Firmware/ultralcd.cpp:4238 ../../Firmware/ultralcd.cpp:4603
#: ../../Firmware/ultralcd.cpp:4618 ../../Firmware/ultralcd.cpp:4635
#: ../../Firmware/ultralcd.cpp:4638 ../../Firmware/ultralcd.cpp:5609
#: ../../Firmware/ultralcd.cpp:5618 ../../Firmware/ultralcd.cpp:5689
#: ../../Firmware/ultralcd.cpp:7670 ../../Firmware/ultralcd.cpp:7674
msgid "On"
msgstr ""

#. MSG_SOUND_ONCE c=7
#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4326
msgid "Once"
msgstr ""

#. MSG_PAUSED_THERMAL_ERROR c=20
#: ../../Firmware/Marlin_main.cpp:9572 ../../Firmware/messages.cpp:174
msgid "PAUSED THERMAL ERROR"
msgstr ""

#. MSG_PID_RUNNING c=20
#: ../../Firmware/ultralcd.cpp:909
msgid "PID cal."
msgstr ""

#. MSG_PID_FINISHED c=20
#: ../../Firmware/ultralcd.cpp:914
msgid "PID cal. finished"
msgstr ""

#. MSG_PID_EXTRUDER c=17
#: ../../Firmware/ultralcd.cpp:4733
msgid "PID calibration"
msgstr ""

#. MSG_PINDA_PREHEAT c=20
#: ../../Firmware/ultralcd.cpp:610
msgid "PINDA Heating"
msgstr ""

#. MSG_PINDA_CALIBRATION c=13
#: ../../Firmware/Marlin_main.cpp:4789 ../../Firmware/Marlin_main.cpp:4891
#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:607
#: ../../Firmware/ultralcd.cpp:4635 ../../Firmware/ultralcd.cpp:4740
msgid "PINDA cal."
msgstr ""

#. MSG_PINDA_CAL_FAILED c=20 r=4
#: ../../Firmware/ultralcd.cpp:3272
msgid "PINDA calibration failed"
msgstr ""

#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
#: ../../Firmware/Marlin_main.cpp:4968 ../../Firmware/messages.cpp:115
#: ../../Firmware/ultralcd.cpp:3266
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr ""

#. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
msgid "PULLEY CANNOT MOVE"
msgstr ""

#. MSG_PROGRESS_PARK_SELECTOR c=20
#: ../../Firmware/mmu2_progress_converter.cpp:26
#: ../../Firmware/mmu2_progress_converter.cpp:57
msgid "Parking selector"
msgstr ""

#. MSG_PAUSE c=5
#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:4153
msgid "Pause"
msgstr ""

#. MSG_PAUSE_PRINT c=18
#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5365
#: ../../Firmware/ultralcd.cpp:5367
msgid "Pause print"
msgstr ""

#. MSG_PROGRESS_PERFORM_CUT c=20
#: ../../Firmware/mmu2_progress_converter.cpp:24
#: ../../Firmware/mmu2_progress_converter.cpp:55
msgid "Performing cut"
msgstr ""

#. MSG_PAPER c=20 r=8
#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/messages.cpp:72
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""

#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4052
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""

#. MSG_CHECK_IR_CONNECTION c=20 r=4
#: ../../Firmware/ultralcd.cpp:6107
msgid "Please check the IR sensor connection, unload filament if present."
msgstr ""

#. MSG_SELFTEST_PLEASECHECK c=20
#: ../../Firmware/ultralcd.cpp:6812
msgid "Please check:"
msgstr ""

#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ../../Firmware/ultralcd.cpp:4015
msgid "Please clean heatbed and then press the knob."
msgstr ""

#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: ../../Firmware/Marlin_main.cpp:3257 ../../Firmware/messages.cpp:24
msgid "Please clean the nozzle for calibration. Click when done."
msgstr ""

#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
#: ../../Firmware/ultralcd.cpp:3800
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr ""

#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
#: ../../Firmware/ultralcd.cpp:3794
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""

#. MSG_PLEASE_LOAD_PLA c=20 r=4
#: ../../Firmware/ultralcd.cpp:3720
msgid "Please load filament first."
msgstr ""

#. MSG_CHECK_IDLER c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3536
msgid "Please open idler and remove filament manually."
msgstr ""

#. MSG_PLACE_STEEL_SHEET c=20 r=4
#: ../../Firmware/mesh_bed_calibration.cpp:2796 ../../Firmware/messages.cpp:74
#: ../../Firmware/ultralcd.cpp:3947
msgid "Please place steel sheet on heatbed."
msgstr ""

#. MSG_PRESS_TO_UNLOAD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11398 ../../Firmware/Marlin_main.cpp:11428
#: ../../Firmware/messages.cpp:78
msgid "Please press the knob to unload filament"
msgstr ""

#. MSG_PULL_OUT_FILAMENT c=20 r=4
#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5067
msgid "Please pull out filament immediately"
msgstr ""

#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
#: ../../Firmware/ultralcd.cpp:3943
msgid "Please remove shipping helpers first."
msgstr ""

#. MSG_REMOVE_STEEL_SHEET c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/Marlin_main.cpp:4754
#: ../../Firmware/messages.cpp:83
msgid "Please remove steel sheet from heatbed."
msgstr ""

#. MSG_RUN_XYZ c=20 r=4
#: ../../Firmware/Marlin_main.cpp:4730
msgid "Please run XYZ calibration first."
msgstr ""

#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:6104
msgid "Please unload the filament first, then repeat this action."
msgstr ""

#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
#: ../../Firmware/util.cpp:217
msgid "Please upgrade."
msgstr ""

#. MSG_PLEASE_WAIT c=20
#: ../../Firmware/Marlin_main.cpp:3532 ../../Firmware/Marlin_main.cpp:3550
#: ../../Firmware/Marlin_main.cpp:7884 ../../Firmware/messages.cpp:75
#: ../../Firmware/ultralcd.cpp:2200 ../../Firmware/ultralcd.cpp:2211
msgid "Please wait"
msgstr ""

#. MSG_POWER_FAILURES c=15
#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1229
#: ../../Firmware/ultralcd.cpp:1258
msgid "Power failures"
msgstr ""

#. MSG_PREHEAT c=18
#: ../../Firmware/ultralcd.cpp:5360
msgid "Preheat"
msgstr ""

#. MSG_PREHEAT_NOZZLE c=20
#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2281
msgid "Preheat the nozzle!"
msgstr ""

#. MSG_WIZARD_HEATING c=20 r=3
#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:2794
#: ../../Firmware/ultralcd.cpp:3779 ../../Firmware/ultralcd.cpp:3781
msgid "Preheating nozzle. Please wait."
msgstr ""

#. MSG_PREHEATING_TO_CUT c=20
#: ../../Firmware/ultralcd.cpp:1997
msgid "Preheating to cut"
msgstr ""

#. MSG_PREHEATING_TO_EJECT c=20
#: ../../Firmware/ultralcd.cpp:1994
msgid "Preheating to eject"
msgstr ""

#. MSG_PREHEATING_TO_LOAD c=20
#: ../../Firmware/ultralcd.cpp:1985
msgid "Preheating to load"
msgstr ""

#. MSG_PREHEATING_TO_UNLOAD c=20
#: ../../Firmware/ultralcd.cpp:1990
msgid "Preheating to unload"
msgstr ""

#. MSG_PRELOAD_TO_MMU c=17
#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5227
msgid "Preload to MMU"
msgstr ""

#. MSG_PROGRESS_PREPARE_BLADE c=20
#: ../../Firmware/mmu2_progress_converter.cpp:22
#: ../../Firmware/mmu2_progress_converter.cpp:53
msgid "Preparing blade"
msgstr ""

#. MSG_PRESS_KNOB c=20
#: ../../Firmware/ultralcd.cpp:1811
msgid "Press the knob"
msgstr ""

#. MSG_PRESS_TO_PREHEAT c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11410
msgid "Press the knob to preheat nozzle and continue."
msgstr ""

#. MSG_PRINT_ABORTED c=20
#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:807
msgid "Print aborted"
msgstr ""

#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1102
#: ../../Firmware/ultralcd.cpp:7166
msgid "Print fan:"
msgstr ""

#. MSG_CARD_MENU c=18
#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5398
msgid "Print from SD"
msgstr ""

#. MSG_PRINT_PAUSED c=20
#: ../../Firmware/ultralcd.cpp:821
msgid "Print paused"
msgstr ""

#. MSG_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2362
msgid "Print time"
msgstr ""

#. MSG_PRINTER_IP c=18
#: ../../Firmware/ultralcd.cpp:1695
msgid "Printer IP Addr:"
msgstr ""

#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First"
" steps, section Calibration flow."
msgstr ""

#. MSG_DESC_PULLEY_STALLED c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
msgstr ""

#. MSG_PROGRESS_PUSH_FILAMENT c=20
#: ../../Firmware/mmu2_progress_converter.cpp:23
#: ../../Firmware/mmu2_progress_converter.cpp:54
msgid "Pushing filament"
msgstr ""

#. MSG_TITLE_QUEUE_FULL c=20
#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
msgid "QUEUE FULL"
msgstr ""

#. MSG_RPI_PORT c=13
#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4638
msgid "RPi port"
msgstr ""

#. MSG_BED_CORRECTION_REAR c=14
#: ../../Firmware/ultralcd.cpp:2733
msgid "Rear side [µm]"
msgstr ""

#. MSG_RECOVERING_PRINT c=20
#: ../../Firmware/Marlin_main.cpp:10762
msgid "Recovering print"
msgstr ""

#. MSG_REMOVE_OLD_FILAMENT c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3434
msgid "Remove old filament and press the knob to start loading new filament."
msgstr ""

#. MSG_DESC_FILAMENT_EJECTED c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
msgid "Remove the ejected filament from the front of the MMU."
msgstr ""

#. MSG_RENAME c=18
#: ../../Firmware/ultralcd.cpp:5284
msgid "Rename"
msgstr ""

#. MSG_DESC_INVALID_TOOL c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
msgid ""
"Requested filament tool is not available on this hardware. Check the G-code "
"for tool index out of range (T0-T4)."
msgstr ""

#. MSG_RESET c=14
#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2734
#: ../../Firmware/ultralcd.cpp:5285
msgid "Reset"
msgstr ""

#. MSG_CALIBRATE_BED_RESET c=18
#: ../../Firmware/ultralcd.cpp:4737
msgid "Reset XYZ calibr."
msgstr ""

#. MSG_RESUME_PRINT c=18
#: ../../Firmware/Marlin_main.cpp:626 ../../Firmware/messages.cpp:85
#: ../../Firmware/ultralcd.cpp:5379 ../../Firmware/ultralcd.cpp:5381
msgid "Resume print"
msgstr ""

#. MSG_RESUMING_PRINT c=20
#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:618
msgid "Resuming print"
msgstr ""

#. MSG_PROGRESS_RETRACT_FINDA c=20
#: ../../Firmware/mmu2_progress_converter.cpp:28
#: ../../Firmware/mmu2_progress_converter.cpp:59
msgid "Retract from FINDA"
msgstr ""

#. MSG_BTN_RETRY c=8
#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
msgid "Retry"
msgstr ""

#. MSG_PROGRESS_RETURN_SELECTOR c=20
#: ../../Firmware/mmu2_progress_converter.cpp:25
#: ../../Firmware/mmu2_progress_converter.cpp:56
msgid "Returning selector"
msgstr ""

#. MSG_RIGHT c=10
#: ../../Firmware/ultralcd.cpp:2493
msgid "Right"
msgstr ""

#. MSG_BED_CORRECTION_RIGHT c=14
#: ../../Firmware/ultralcd.cpp:2731
msgid "Right side[µm]"
msgstr ""

#. MSG_BTN_RESTART_MMU c=8
#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
msgid "RstMMU"
msgstr ""

#. MSG_WIZARD_RERUN c=20 r=7
#: ../../Firmware/ultralcd.cpp:3743
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""

#. MSG_SD_CARD c=8
#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4650
#: ../../Firmware/ultralcd.cpp:4652
msgid "SD card"
msgstr ""

#. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
msgid "SELECTOR CANNOT HOME"
msgstr ""

#. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
msgid "SELECTOR CANNOT MOVE"
msgstr ""

#. MSG_STOPPED c=20
#: ../../Firmware/Marlin_main.cpp:9598 ../../Firmware/messages.cpp:113
msgid "STOPPED."
msgstr ""

#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3263 ../../Firmware/Marlin_main.cpp:3285
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
msgid "Searching bed calibration point"
msgstr ""

#. MSG_SELECT c=18
#: ../../Firmware/ultralcd.cpp:5277
msgid "Select"
msgstr ""

#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:3817
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr ""

#. MSG_SELECT_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3472 ../../Firmware/Tcodes.cpp:32
#: ../../Firmware/Tcodes.cpp:47 ../../Firmware/messages.cpp:52
#: ../../Firmware/ultralcd.cpp:3690
msgid "Select filament:"
msgstr ""

#. MSG_SELECT_LANGUAGE c=18
#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3535
#: ../../Firmware/ultralcd.cpp:4645
msgid "Select language"
msgstr ""

#. MSG_SEL_PREHEAT_TEMP c=20 r=6
#: ../../Firmware/ultralcd.cpp:3989
msgid "Select nozzle preheat temperature which matches your material."
msgstr ""

#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:3822
msgid "Select temperature which matches your material."
msgstr ""

#. MSG_PROGRESS_SELECT_SLOT c=20
#: ../../Firmware/mmu2_progress_converter.cpp:21
#: ../../Firmware/mmu2_progress_converter.cpp:52
msgid "Selecting fil. slot"
msgstr ""

#. MSG_DESC_INSPECT_FINDA c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
msgid ""
"Selector can't move due to FINDA detecting a filament. Make sure no filament"
" is in selector and FINDA works properly."
msgstr ""

#. MSG_SELFTEST_OK c=20
#: ../../Firmware/ultralcd.cpp:6372
msgid "Self test OK"
msgstr ""

#. MSG_SELFTEST_START c=20
#: ../../Firmware/ultralcd.cpp:6144
msgid "Self test start"
msgstr ""

#. MSG_SELFTEST c=18
#: ../../Firmware/ultralcd.cpp:4724
msgid "Selftest"
msgstr ""

#. MSG_SELFTEST_ERROR c=20
#: ../../Firmware/ultralcd.cpp:6811
msgid "Selftest error!"
msgstr ""

#. MSG_SELFTEST_FAILED c=20
#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6377
#: ../../Firmware/ultralcd.cpp:6898 ../../Firmware/ultralcd.cpp:7156
msgid "Selftest failed"
msgstr ""

#. MSG_FORCE_SELFTEST c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1523
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""

#. MSG_INFO_SENSORS c=18
#: ../../Firmware/ultralcd.cpp:1707
msgid "Sensor info"
msgstr ""

#. MSG_FS_VERIFIED c=20 r=3
#: ../../Firmware/ultralcd.cpp:6111
msgid "Sensor verified, remove the filament now."
msgstr ""

#. MSG_SET_TEMPERATURE c=20
#: ../../Firmware/ultralcd.cpp:2751
msgid "Set temperature:"
msgstr ""

#. MSG_SETTINGS c=18
#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3393
#: ../../Firmware/ultralcd.cpp:3552 ../../Firmware/ultralcd.cpp:4073
#: ../../Firmware/ultralcd.cpp:5446 ../../Firmware/ultralcd.cpp:5680
#: ../../Firmware/ultralcd.cpp:5727
msgid "Settings"
msgstr ""

#. MSG_SEVERE_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2536
msgid "Severe skew"
msgstr ""

#. MSG_SHEET c=10
#: ../../Firmware/menu.cpp:200 ../../Firmware/menu.cpp:212
#: ../../Firmware/messages.cpp:63
msgid "Sheet"
msgstr ""

#. MSG_SHEET_OFFSET c=20 r=4
#: ../../Firmware/ultralcd.cpp:3680
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""

#. MSG_SHOW_END_STOPS c=18
#: ../../Firmware/ultralcd.cpp:4735
msgid "Show end stops"
msgstr ""

#. MSG_SILENT c=7
#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4258
#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:5631
msgid "Silent"
msgstr ""

#. MSG_SLIGHT_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2535
msgid "Slight skew"
msgstr ""

#. MSG_FILE_CNT c=20 r=6
#: ../../Firmware/cardreader.cpp:816
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""

#. MSG_ZLEVELING_ENFORCED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3037
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr ""

#. MSG_SORT c=7
#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4655
#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4657
msgid "Sort"
msgstr ""

#. MSG_SORTING_FILES c=20
#: ../../Firmware/cardreader.cpp:860 ../../Firmware/cardreader.cpp:927
#: ../../Firmware/messages.cpp:100
msgid "Sorting files"
msgstr ""

#. MSG_SOUND c=9
#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4323
#: ../../Firmware/ultralcd.cpp:4326 ../../Firmware/ultralcd.cpp:4329
#: ../../Firmware/ultralcd.cpp:4332 ../../Firmware/ultralcd.cpp:4335
msgid "Sound"
msgstr ""

#. MSG_SPEED c=15
#: ../../Firmware/ultralcd.cpp:5584
msgid "Speed"
msgstr ""

#. MSG_SELFTEST_FAN_YES c=19
#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7012
#: ../../Firmware/ultralcd.cpp:7027 ../../Firmware/ultralcd.cpp:7035
msgid "Spinning"
msgstr ""

#. MSG_TEMP_CAL_WARNING c=20 r=4
#: ../../Firmware/Marlin_main.cpp:4743
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""

#. MSG_STATISTICS c=18
#: ../../Firmware/ultralcd.cpp:5451
msgid "Statistics"
msgstr ""

#. MSG_STEALTH c=7
#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4235
#: ../../Firmware/ultralcd.cpp:4279 ../../Firmware/ultralcd.cpp:5623
msgid "Stealth"
msgstr ""

#. MSG_STEEL_SHEETS c=18
#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:4557
#: ../../Firmware/ultralcd.cpp:5274
msgid "Steel sheets"
msgstr ""

#. MSG_BTN_STOP c=8
#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
msgid "Stop"
msgstr ""

#. MSG_STOP_PRINT c=18
#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5386
#: ../../Firmware/ultralcd.cpp:5866
msgid "Stop print"
msgstr ""

#. MSG_STRICT c=8
#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4372
#: ../../Firmware/ultralcd.cpp:4452 ../../Firmware/ultralcd.cpp:4491
msgid "Strict"
msgstr ""

#. MSG_SUPPORT c=18
#: ../../Firmware/ultralcd.cpp:5460
msgid "Support"
msgstr ""

#. MSG_SELFTEST_SWAPPED c=16
#: ../../Firmware/ultralcd.cpp:6870
msgid "Swapped"
msgstr ""

#. MSG_THERMAL_ANOMALY c=20
#: ../../Firmware/messages.cpp:176 ../../Firmware/temperature.cpp:2448
msgid "THERMAL ANOMALY"
msgstr ""

#. MSG_TITLE_TMC_DRIVER_ERROR c=20
#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
msgid "TMC DRIVER ERROR"
msgstr ""

#. MSG_TITLE_TMC_DRIVER_RESET c=20
#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
msgid "TMC DRIVER RESET"
msgstr ""

#. MSG_TITLE_TMC_DRIVER_SHORTED c=20
#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
msgid "TMC DRIVER SHORTED"
msgstr ""

#. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
msgid "TMC OVERHEAT ERROR"
msgstr ""

#. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
msgid "TMC UNDERVOLTAGE ERR"
msgstr ""

#. MSG_TEMPERATURE c=18
#: ../../Firmware/ultralcd.cpp:4591
msgid "Temperature"
msgstr ""

#. MSG_MENU_TEMPERATURES c=18
#: ../../Firmware/ultralcd.cpp:1713
msgid "Temperatures"
msgstr ""

#. MSG_TESTING_FILAMENT c=20
#: ../../Firmware/messages.cpp:58 ../../Firmware/mmu2_reporting.cpp:335
msgid "Testing filament"
msgstr ""

#. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
msgid ""
"The Idler cannot home properly. Check for anything blocking its movement."
msgstr ""

#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
msgid ""
"The MMU firmware version incompatible with the printer's FW. Update to "
"version 2.1.9."
msgstr ""

#. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
msgid ""
"The Selector cannot home properly. Check for anything blocking its movement."
msgstr ""

#. MSG_WIZARD_V2_CAL_2 c=20 r=12
#: ../../Firmware/ultralcd.cpp:3825
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""

#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/messages.cpp:43
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""

#. MSG_TM_CAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:3970
msgid ""
"Thermal model cal. takes approx. 12 mins. See\n"
"prusa.io/tm-cal"
msgstr ""

#. MSG_TM_NOT_CAL c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1559 ../../Firmware/messages.cpp:177
msgid "Thermal model not calibrated yet."
msgstr ""

#. MSG_SORT_TIME c=8
#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4655
msgid "Time"
msgstr ""

#. MSG_TIMEOUT c=12
#: ../../Firmware/messages.cpp:164 ../../Firmware/ultralcd.cpp:5718
msgid "Timeout"
msgstr ""

#. MSG_TOTAL c=6
#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1125
#: ../../Firmware/ultralcd.cpp:1284
msgid "Total"
msgstr ""

#. MSG_TOTAL_FAILURES c=20
#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1173
#: ../../Firmware/ultralcd.cpp:1228 ../../Firmware/ultralcd.cpp:1314
msgid "Total failures"
msgstr ""

#. MSG_TOTAL_FILAMENT c=19
#: ../../Firmware/ultralcd.cpp:2383
msgid "Total filament"
msgstr ""

#. MSG_TOTAL_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2384
msgid "Total print time"
msgstr ""

#. MSG_TUNE c=18
#: ../../Firmware/ultralcd.cpp:5358
msgid "Tune"
msgstr ""

#. MSG_TITLE_UNLOAD_MANUALLY c=20
#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
msgid "UNLOAD MANUALLY"
msgstr ""

#. MSG_BTN_UNLOAD c=8
#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
msgid "Unload"
msgstr ""

#. MSG_UNLOAD_FILAMENT c=16
#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:5427
#: ../../Firmware/ultralcd.cpp:5444
msgid "Unload filament"
msgstr ""

#. MSG_UNLOADING_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3455 ../../Firmware/messages.cpp:117
#: ../../Firmware/mmu2_progress_converter.cpp:50
#: ../../Firmware/ultralcd.cpp:5045
msgid "Unloading filament"
msgstr ""

#. MSG_PROGRESS_UNLOAD_FINDA c=20
#: ../../Firmware/mmu2_progress_converter.cpp:11
#: ../../Firmware/mmu2_progress_converter.cpp:37
msgid "Unloading to FINDA"
msgstr ""

#. MSG_PROGRESS_UNLOAD_PULLEY c=20
#: ../../Firmware/mmu2_progress_converter.cpp:12
#: ../../Firmware/mmu2_progress_converter.cpp:38
msgid "Unloading to pulley"
msgstr ""

#. MSG_FIL_FAILED c=20 r=4
#: ../../Firmware/ultralcd.cpp:6114
msgid "Verification failed, remove the filament and try again."
msgstr ""

#. MSG_MENU_VOLTAGES c=18
#: ../../Firmware/ultralcd.cpp:1716
msgid "Voltages"
msgstr ""

#. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
msgid "WARNING TMC TOO HOT"
msgstr ""

#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: ../../Firmware/ultralcd.cpp:3436
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""

#. MSG_USERWAIT c=20
#: ../../Firmware/Marlin_main.cpp:5265
msgid "Wait for user..."
msgstr ""

#. MSG_WAITING_TEMP_PINDA c=20 r=3
#: ../../Firmware/ultralcd.cpp:2775
msgid "Waiting for PINDA probe cooling"
msgstr ""

#. MSG_WAITING_TEMP c=20 r=4
#: ../../Firmware/ultralcd.cpp:2807
msgid "Waiting for nozzle and bed cooling"
msgstr ""

#. MSG_WARN c=8
#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4369
#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4488
msgid "Warn"
msgstr ""

#. MSG_CHANGED_BOTH c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1500
msgid "Warning: both printer type and motherboard type changed."
msgstr ""

#. MSG_CHANGED_MOTHERBOARD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1492
msgid "Warning: motherboard type changed."
msgstr ""

#. MSG_CHANGED_PRINTER c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1496
msgid "Warning: printer type changed."
msgstr ""

#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3529
msgid "Was filament unload successful?"
msgstr ""

#. MSG_SELFTEST_WIRINGERROR c=18
#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6822
#: ../../Firmware/ultralcd.cpp:6826 ../../Firmware/ultralcd.cpp:6846
#: ../../Firmware/ultralcd.cpp:6852 ../../Firmware/ultralcd.cpp:6876
msgid "Wiring error"
msgstr ""

#. MSG_WIZARD c=17
#: ../../Firmware/ultralcd.cpp:4715
msgid "Wizard"
msgstr ""

#. MSG_X_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4077
msgid "X-correct"
msgstr ""

#. MSG_XFLASH c=18
#: ../../Firmware/ultralcd.cpp:5462
msgid "XFLASH init"
msgstr ""

#. MSG_XYZ_DETAILS c=18
#: ../../Firmware/ultralcd.cpp:1705
msgid "XYZ cal. details"
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ../../Firmware/ultralcd.cpp:3244
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ../../Firmware/ultralcd.cpp:3241
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3222
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3225
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
#: ../../Firmware/ultralcd.cpp:3204
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3210
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3207
#: ../../Firmware/ultralcd.cpp:3235
msgid "XYZ calibration failed. Please consult the manual."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3213
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ../../Firmware/ultralcd.cpp:3238
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr ""

#. MSG_Y_DIST_FROM_MIN c=20
#: ../../Firmware/ultralcd.cpp:2490
msgid "Y distance from min"
msgstr ""

#. MSG_Y_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4078
msgid "Y-correct"
msgstr ""

#. MSG_YES c=4
#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:2226
#: ../../Firmware/ultralcd.cpp:3066 ../../Firmware/ultralcd.cpp:4579
#: ../../Firmware/ultralcd.cpp:4672 ../../Firmware/ultralcd.cpp:5875
msgid "Yes"
msgstr ""

#. MSG_WIZARD_QUIT c=20 r=8
#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4039
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr ""

#. MSG_Z_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4079
msgid "Z-correct"
msgstr ""

#. MSG_Z_PROBE_NR c=14
#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5688
msgid "Z-probe nr."
msgstr ""

#. MSG_MEASURED_OFFSET c=20
#: ../../Firmware/ultralcd.cpp:2560
msgid "[0;0] point offset"
msgstr ""

#. MSG_PRESS c=20 r=2
#: ../../Firmware/ultralcd.cpp:2168
msgid "and press the knob"
msgstr ""

#. MSG_TO_LOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:1819
msgid "to load filament"
msgstr ""

#. MSG_TO_UNLOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:1823
msgid "to unload filament"
msgstr ""

#. MSG_UNKNOWN c=13
#: ../../Firmware/ultralcd.cpp:1672
msgid "unknown"
msgstr ""

#. MSG_IR_UNKNOWN c=18
#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:172
msgid "unknown state"
msgstr ""

#. MSG_REFRESH c=18
#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:5943
#: ../../Firmware/ultralcd.cpp:5946
msgid "🔃Refresh"
msgstr ""