josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

run-in-simulavr.sh: clean up tracein file after being done.

This commit is contained in:
Markus Hitter 2014-07-14 16:56:53 +02:00
parent 4f0a00c1a6
commit 157a5a966b
1 changed files with 18 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
testcases/run-in-simulavr.sh
View File

@ -19,6 +19,12 @@ if [ $# -eq 0 ]; then
fi
# General preparation.
TRACEIN_FILE=$(mktemp)
trap 'rm -f '${TRACEIN_FILE} 0
# Prepare a pin tracing file, assuming a Gen7-v1.4 configuration. See
# http://reprap.org/wiki/SimulAVR#Putting_things_together:_an_example
#
@ -27,16 +33,16 @@ fi
# #define Y_DIR_PIN DIO26
# #define Y_STEP_PIN DIO27
# #define DEBUG_LED_PIN DIO21
echo "# X Dir" > /tmp/tracein.txt
echo "+ PORTA.A3-Out" >> /tmp/tracein.txt
echo "# X Step" >> /tmp/tracein.txt
echo "+ PORTA.A2-Out" >> /tmp/tracein.txt
echo "# Y Dir" >> /tmp/tracein.txt
echo "+ PORTA.A5-Out" >> /tmp/tracein.txt
echo "# Y Step" >> /tmp/tracein.txt
echo "+ PORTA.A4-Out" >> /tmp/tracein.txt
echo "# DEBUG LED" >> /tmp/tracein.txt
echo "+ PORTC.C5-Out" >> /tmp/tracein.txt
echo "# X Dir" > ${TRACEIN_FILE}
echo "+ PORTA.A3-Out" >> ${TRACEIN_FILE}
echo "# X Step" >> ${TRACEIN_FILE}
echo "+ PORTA.A2-Out" >> ${TRACEIN_FILE}
echo "# Y Dir" >> ${TRACEIN_FILE}
echo "+ PORTA.A5-Out" >> ${TRACEIN_FILE}
echo "# Y Step" >> ${TRACEIN_FILE}
echo "+ PORTA.A4-Out" >> ${TRACEIN_FILE}
echo "# DEBUG LED" >> ${TRACEIN_FILE}
echo "+ PORTC.C5-Out" >> ${TRACEIN_FILE}
echo "Assuming pin configuration for a Gen7-v1.4 + debug LED on DIO21."
STEPS_PER_M_X=$(grep STEPS_PER_M_X ../config.h | \
@ -71,7 +77,7 @@ for GCODE_FILE in $*; do
# We assume here queue and rx buffer are large enough to read
# the file in one chunk. If not, raise MOVEBUFFER_SIZE in config.h.
set -x
"${SIMULAVR}" -c vcd:/tmp/tracein.txt:"${VCD_FILE}" \
"${SIMULAVR}" -c vcd:${TRACEIN_FILE}:"${VCD_FILE}" \
-f ../build/teacup.elf \
-m 60000000000 -v < "${GCODE_FILE}"
set +x
@ -80,7 +86,7 @@ for GCODE_FILE in $*; do
# Make plottable files from VCD files.
# This is very rudimentary and does a lot of assumptions.
# For examble, pin data is assumed to always be b0/b1, pin naming
# is assumed to match the order in tracein.txt and starting at "0".
# is assumed to match the order in ${TRACEIN_FILE} and starting at "0".
awk '
BEGIN {
print "0 0 0 0 0";