josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Configtool: convert template for Teensy++ 2.0. 

Note the "++", it's a Teensy 2.0 with bigger CPU and more I/O pins.
This commit is contained in:
jbernardis 2015-02-07 23:38:12 -05:00 committed by Markus Hitter
parent bcf7691bdd
commit 20af64d780
3 changed files with 236 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
config.default.h
View File

@ -19,6 +19,7 @@
//#include "config/board.sanguinololu-v1.2.h" //#include "config/board.sanguinololu-v1.2.h"
//#include "config/board.sanguish.h" //#include "config/board.sanguish.h"
//#include "config/board.teensy-v2.0.h" //#include "config/board.teensy-v2.0.h"
//#include "config/board.teensy++-v2.0.h"
// Uncomment your printer type, comment out all others. // Uncomment your printer type, comment out all others.
#include "config/printer.mendel.h" #include "config/printer.mendel.h"

234
config/board.teensy++-v2.0.h Normal file
View File

@ -0,0 +1,234 @@
/***************************************************************************\
* *
* 1. CPU *
* *
\***************************************************************************/
/** \def CPU_TYPE
CPU types a user should be able to choose from in configtool. All
commented out.
*/
//#define CPU_TYPE at90usb1286
/** \def CPU
CPU actually present on the board.
*/
#define CPU at90usb1286
/** \def F_CPU_OPT
CPU clock frequencies a user should be able to choose from in configtool.
All commented out.
*/
//#define F_CPU_OPT 16000000UL
/** \def F_CPU
Actual CPU clock rate. #ifndef required for Arduino compatibility.
*/
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory
for GEN3 extruder firmware.
*/
#define MOTHERBOARD
/***************************************************************************\
* *
* 2. PINOUTS *
* *
\***************************************************************************/
#include "../arduino.h"
#define X_STEP_PIN DIO28
#define X_DIR_PIN DIO29
#define X_MIN_PIN DIO2
//#define X_MAX_PIN DIO2
//#define X_ENABLE_PIN DIO29
//#define X_INVERT_DIR
//#define X_INVERT_MIN
//#define X_INVERT_MAX
//#define X_INVERT_ENABLE
#define Y_STEP_PIN DIO30
#define Y_DIR_PIN DIO31
#define Y_MIN_PIN DIO3
//#define Y_MAX_PIN DIO17
//#define Y_ENABLE_PIN DIO26
//#define Y_INVERT_DIR
//#define Y_INVERT_MIN
//#define Y_INVERT_MAX
//#define Y_INVERT_ENABLE
#define Z_STEP_PIN DIO32
#define Z_DIR_PIN DIO33
#define Z_MIN_PIN DIO4
//#define Z_MAX_PIN DIO19
//#define Z_ENABLE_PIN DIO23
//#define Z_INVERT_DIR
//#define Z_INVERT_MIN
//#define Z_INVERT_MAX
//#define Z_INVERT_ENABLE
#define E_STEP_PIN DIO34
#define E_DIR_PIN DIO35
//#define E_ENABLE_PIN DIO20
#define E_INVERT_DIR
//#define E_INVERT_ENABLE
#define PS_ON_PIN DIO27
//#define PS_MOSFET_PIN DIO25
#define STEPPER_ENABLE_PIN DIO26
#define STEPPER_INVERT_ENABLE
/** \def DEBUG_LED_PIN
Enable flashing of a LED during motor stepping.
Disabled by default. Uncommenting this makes the binary a few bytes larger
and adds a few cycles to the step timing interrrupt in timer.c. Also used
for precision profiling (profiling works even without actually having such
a LED in hardware), see
http://reprap.org/wiki/Teacup_Firmware#Doing_precision_profiling
*/
//#define DEBUG_LED_PIN DIO13
/***************************************************************************\
* *
* 3. TEMPERATURE SENSORS *
* *
\***************************************************************************/
#ifndef DEFINE_TEMP_SENSOR
#define DEFINE_TEMP_SENSOR(...)
#endif
/** \def TEMP_MAX6675 TEMP_THERMISTOR TEMP_AD595 TEMP_PT100 TEMP_INTERCOM
Which temperature sensor types are you using? Leave all used ones
uncommented, comment out all others to save binary size and enhance
performance.
*/
//#define TEMP_MAX6675
#define TEMP_THERMISTOR
//#define TEMP_AD595
//#define TEMP_PT100
//#define TEMP_INTERCOM
/** \def TEMP_SENSOR_PIN
Temperature sensor pins a user should be able to choose from in configtool.
All commented out.
*/
//#define TEMP_SENSOR_PIN AIO6
//#define TEMP_SENSOR_PIN AIO7
/** \def DEFINE_TEMP_SENSOR
Define your temperature sensors here. One line for each sensor, only
limited by the number of available ATmega pins.
Types are same as TEMP_ list above - TT_MAX6675, TT_THERMISTOR, TT_AD595,
TT_PT100, TT_INTERCOM. See list in temp.c.
The "additional" field is used for TT_THERMISTOR only. It defines the
name of the table(s) in ThermistorTable.h to use. Typically, this is
THERMISTOR_EXTRUDER for the first or only table, or THERMISTOR_BED for
the second table. See also early in ThermistorTable.{single|double}.h.
For a GEN3 set temp_type to TT_INTERCOM and temp_pin to AIO0. The pin
won't be used in this case.
*/
// name type pin additional
//DEFINE_TEMP_SENSORS_START
DEFINE_TEMP_SENSOR(extruder, TT_THERMISTOR, AIO7, THERMISTOR_EXTRUDER)
DEFINE_TEMP_SENSOR(bed, TT_THERMISTOR, AIO6, THERMISTOR_BED)
//DEFINE_TEMP_SENSORS_END
/***************************************************************************\
* *
* 4. HEATERS *
* *
\***************************************************************************/
#ifndef DEFINE_HEATER
#define DEFINE_HEATER(...)
#endif
/** \def HEATER_PIN
Heater pins a user should be able to choose from in configtool. All
commented out.
*/
//#define HEATER_PIN DIO14
//#define HEATER_PIN DIO15
//#define HEATER_PIN DIO16
/** \def DEFINE_HEATER
Define your heaters and devices here.
To attach a heater to a temp sensor above, simply use exactly the same
name - copy+paste is your friend. Some common names are 'extruder',
'bed', 'fan', 'motor', ... names with special meaning can be found
in gcode_process.c. Currently, these are:
HEATER_extruder (M104)
HEATER_bed (M140)
HEATER_fan (M106)
Devices don't neccessarily have a temperature sensor, e.g. fans or
milling spindles. Operate such devices by setting their power (M106),
instead of setting their temperature (M104).
Also note, the index of a heater (M106 P#) can differ from the index of
its attached temperature sensor (M104 P#) in case sensor-less devices
are defined or the order of the definitions differs. The first defined
device has the index 0 (zero).
Set 'pwm' to ...
1 for using PWM on a PWM-able pin and on/off on other pins.
0 for using on/off on a PWM-able pin, too.
Using PWM usually gives smoother temperature control but can conflict
with slow switches, like solid state relays. PWM frequency can be
influenced globally with FAST_PWM, see below.
*/
// name port pwm
//DEFINE_HEATERS_START
DEFINE_HEATER(extruder, DIO15, 1)
DEFINE_HEATER(bed, DIO14, 1)
DEFINE_HEATER(fan, DIO16, 0)
#define HEATER_EXTRUDER HEATER_extruder
#define HEATER_BED HEATER_bed
#define HEATER_FAN HEATER_fan
//DEFINE_HEATERS_END
/***************************************************************************\
* *
* 5. COMMUNICATION OPTIONS *
* *
\***************************************************************************/
/** \def BAUD
Baud rate for the serial RS232 protocol connection to the host. Usually
115200, other common values are 19200, 38400 or 57600. Ignored when USB_SERIAL
is defined.
*/
//#define BAUD 115200
/** \def XONXOFF
Xon/Xoff flow control.
Redundant when using RepRap Host for sending G-code, but mandatory when
sending G-code files with a plain terminal emulator, like GtkTerm (Linux),
CoolTerm (Mac) or HyperTerminal (Windows).
*/
//#define XONXOFF
/** \def USB_SERIAL
Define this for using USB instead of the serial RS232 protocol. Works on
USB-equipped ATmegas, like the ATmega32U4, only.
*/
#define USB_SERIAL

1
configtool/protectedfiles.py
View File

@ -12,6 +12,7 @@ protectedFiles = [
"board.sanguinololu-v1.2.h", "board.sanguinololu-v1.2.h",
"board.sanguish.h", "board.sanguish.h",
"board.teensy-v2.0.h", "board.teensy-v2.0.h",
"board.teensy++-v2.0.h",
"printer.mendel.h", "printer.mendel.h",
"printer.wolfstrap.h" "printer.wolfstrap.h"
] ]