Clean up default thermistor tables, analog to config.default.h.

Most likely, these tables don't depend on the type of electronics,
but on the type of thermistor.

ThermistorTable.h.dist.old

@@ -1,40 +0,0 @@
-// default thermistor lookup table
-// You may be able to improve the accuracy of this table in various ways.
-//   1. Measure the actual resistance of the resistor. It's "nominally" 4.7K, but that's ± 5%.
-//   2. Measure the actual beta of your thermistor:http://reprap.org/wiki/MeasuringThermistorBeta
-//   3. Generate more table entries than you need, then trim down the ones in uninteresting ranges.
-// In either case you'll have to regenerate this table, which requires python, which is difficult to install on windows.
-// Since you'll have to do some testing to determine the correct temperature for your application anyway, you
-// may decide that the effort isn't worth it. Who cares if it's reporting the "right" temperature as long as it's
-// keeping the temperature steady enough to print, right?
-// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
-// r0: 100000
-// t0: 25
-// r1: 0
-// r2: 4700
-// beta: 4066
-// max adc: 1023
-#define NUMTEMPS 20
-// {ADC, temp*4 }, // temp
-uint16_t temptable[NUMTEMPS][2] PROGMEM = {
-   {1, 3364}, // 841.027617469 C
-   {54, 1021}, // 255.484742371 C
-   {107, 836}, // 209.086676326 C
-   {160, 736}, // 184.041730874 C
-   {213, 667}, // 166.757734773 C
-   {266, 613}, // 153.384693074 C
-   {319, 569}, // 142.306856925 C
-   {372, 530}, // 132.69219366 C
-   {425, 496}, // 124.050228124 C
-   {478, 464}, // 116.059537816 C
-   {531, 433}, // 108.487976164 C
-   {584, 404}, // 101.149819461 C
-   {637, 375}, // 93.8781909528 C
-   {690, 346}, // 86.5019752148 C
-   {743, 315}, // 78.8186715355 C
-   {796, 282}, // 70.5502229207 C
-   {849, 244}, // 61.2498501294 C
-   {902, 200}, // 50.050743055 C
-   {955, 138}, // 34.7070638836 C
-   {1008, 12} // 3.01733235284 C
-};