josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Replace #define HOST by #define MOTHERBOARD. 

Apparently, HOST conflicts with some AVR headers for the
USB-equipped ATmegas.

Patch by DaveX, thank you Dave. See also:
http://forums.reprap.org/read.php?147,33082,182021#msg-182021
This commit is contained in:
Markus Hitter 2013-02-05 13:33:14 +01:00
parent 63d3f012a8
commit 3c5d9d8950
13 changed files with 38 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config.default.h
View File

@ -38,10 +38,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.gen3.h
View File

@ -39,10 +39,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.gen6.h
View File

@ -40,10 +40,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.gen7-v1.1-v1.3.h
View File

@ -46,10 +46,10 @@
#define F_CPU 20000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.gen7-v1.4.h
View File

@ -46,10 +46,10 @@
#define F_CPU 20000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.ramps-v1.2.h
View File

@ -40,10 +40,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.ramps-v1.3.h
View File

@ -40,10 +40,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.sanguinololu-v1.1.h
View File

@ -39,10 +39,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.sanguinololu-v1.2.h
View File

@ -39,10 +39,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

4
config.teensy.h
View File

@ -40,10 +40,10 @@
#define F_CPU 16000000UL
#endif
/** \def HOST
/** \def MOTHERBOARD
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
#define HOST
#define MOTHERBOARD
/** \def STEPS_PER_M

24
intercom.c
View File

@ -32,7 +32,7 @@ volatile uint8_t intercom_flags;
void intercom_init(void)
{
#ifdef HOST
#ifdef MOTHERBOARD
#if INTERCOM_BAUD > 38401
UCSR1A = MASK(U2X1);
UBRR1 = (((F_CPU / 8) / INTERCOM_BAUD) - 0.5);
@ -69,7 +69,7 @@ uint16_t read_temperature(uint8_t index) {
return rx.packet.temp[index];
}
#ifdef HOST
#ifdef MOTHERBOARD
void set_dio(uint8_t index, uint8_t value) {
if (value)
tx.packet.dio |= (1 << index);
@ -122,7 +122,7 @@ void start_send(void) {
packet_pointer = 0;
// actually start sending the packet
#ifdef HOST
#ifdef MOTHERBOARD
UCSR1B |= MASK(UDRIE1);
#else
UCSR0B |= MASK(UDRIE0);
@ -134,7 +134,7 @@ void start_send(void) {
*/
// receive data interrupt- stuff into rx
#ifdef HOST
#ifdef MOTHERBOARD
ISR(USART1_RX_vect)
#else
ISR(USART_RX_vect)
@ -146,7 +146,7 @@ ISR(USART_RX_vect)
// pull character
static uint8_t c;
#ifdef HOST
#ifdef MOTHERBOARD
c = UDR1;
UCSR1A &= ~MASK(FE1) & ~MASK(DOR1) & ~MASK(UPE1);
#else
@ -172,7 +172,7 @@ ISR(USART_RX_vect)
// reset pointer
packet_pointer = 0;
#ifndef HOST
#ifndef MOTHERBOARD
if (rxcrc == _rx.packet.crc &&
_rx.packet.controller_num == THIS_CONTROLLER_NUM){
#else
@ -185,7 +185,7 @@ ISR(USART_RX_vect)
}
}
#ifndef HOST
#ifndef MOTHERBOARD
if (rx.packet.controller_num == THIS_CONTROLLER_NUM) {
if (rxcrc != _rx.packet.crc)
tx.packet.err = ERROR_BAD_CRC;
@ -207,7 +207,7 @@ ISR(USART_RX_vect)
}
// finished transmitting interrupt- only enabled at end of packet
#ifdef HOST
#ifdef MOTHERBOARD
ISR(USART1_TX_vect)
#else
ISR(USART_TX_vect)
@ -220,7 +220,7 @@ ISR(USART_TX_vect)
disable_transmit();
packet_pointer = 0;
intercom_flags = (intercom_flags & ~FLAG_TX_IN_PROGRESS) | FLAG_TX_FINISHED;
#ifdef HOST
#ifdef MOTHERBOARD
UCSR1B &= ~MASK(TXCIE1);
#else
UCSR0B &= ~MASK(TXCIE0);
@ -233,7 +233,7 @@ ISR(USART_TX_vect)
}
// tx queue empty interrupt- send next byte
#ifdef HOST
#ifdef MOTHERBOARD
ISR(USART1_UDRE_vect)
#else
ISR(USART_UDRE_vect)
@ -242,14 +242,14 @@ ISR(USART_UDRE_vect)
// save status register
uint8_t sreg_save = SREG;
#ifdef HOST
#ifdef MOTHERBOARD
UDR1 = _tx.data[packet_pointer++];
#else
UDR0 = _tx.data[packet_pointer++];
#endif
if (packet_pointer >= sizeof(intercom_packet_t)) {
#ifdef HOST
#ifdef MOTHERBOARD
UCSR1B &= ~MASK(UDRIE1);
UCSR1B |= MASK(TXCIE1);
#else

2
intercom.h
View File

@ -4,7 +4,7 @@
#include <stdint.h>
#include "config.h"
#ifdef HOST
#ifdef MOTHERBOARD
#define enable_transmit() do { WRITE(TX_ENABLE_PIN,1); UCSR1B &=~MASK(RXEN1); } while(0)
#define disable_transmit() do { WRITE(TX_ENABLE_PIN,0); UCSR1B &= ~(MASK(TXCIE1) | MASK(UDRIE1)); UCSR1B |= MASK(RXEN1); } while(0)
#else

10
timer.c
View File

@ -16,7 +16,7 @@
#include "arduino.h"
#include "config.h"
#ifdef HOST
#ifdef MOTHERBOARD
#include "dda_queue.h"
#endif
@ -80,7 +80,7 @@ ISR(TIMER1_COMPB_vect) {
SREG = sreg_save;
}
#ifdef HOST
#ifdef MOTHERBOARD
/// comparator A is the step timer. It has higher priority then B.
ISR(TIMER1_COMPA_vect) {
@ -123,7 +123,7 @@ ISR(TIMER1_COMPA_vect) {
MEMORY_BARRIER();
SREG = sreg_save;
}
#endif /* ifdef HOST */
#endif /* ifdef MOTHERBOARD */
/// initialise timer and enable system clock interrupt.
/// step interrupt is enabled later when we start using it
@ -139,7 +139,7 @@ void timer_init()
TIMSK1 = MASK(OCIE1B);
}
#ifdef HOST
#ifdef MOTHERBOARD
/*! Specify how long until the step timer should fire.
\param delay in CPU ticks
@ -230,4 +230,4 @@ void timer_stop() {
// disable all interrupts
TIMSK1 = 0;
}
#endif /* ifdef HOST */
#endif /* ifdef MOTHERBOARD */