josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

dwell now waits for queue flush, M101/M103 no longer accelerate and alter feedrate, homing no longer accelerates

This commit is contained in:
Michael Moon 2010-02-10 23:40:22 +11:00
parent 7326e17560
commit 54a793b3a1
1 changed files with 29 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
mendel/gcode.c
View File

@ -332,6 +332,9 @@ void process_gcode_command(GCODE_COMMAND *gcmd) {
#ifdef XONXOFF
xoff();
#endif
// wait for all moves to complete
for (;queue_empty() == 0;);
// delay
delay_ms(gcmd->P);
#ifdef XONXOFF
xon();
@ -358,7 +361,8 @@ void process_gcode_command(GCODE_COMMAND *gcmd) {
/*
Home XY first
*/
// hit endstops
// hit endstops, no acceleration- we don't care about skipped steps
startpoint.F = FEEDRATE_FAST_XY;
SpecialMoveXY(-250L * STEPS_PER_MM_X, -250L * STEPS_PER_MM_Y, FEEDRATE_FAST_XY);
startpoint.X = startpoint.Y = 0;
@ -377,7 +381,8 @@ void process_gcode_command(GCODE_COMMAND *gcmd) {
/*
Home Z
*/
// hit endstop
// hit endstop, no acceleration- we don't care about skipped steps
startpoint.F = FEEDRATE_FAST_Z;
SpecialMoveZ(-250L * STEPS_PER_MM_Z, FEEDRATE_FAST_Z);
startpoint.Z = 0;
@ -399,6 +404,14 @@ void process_gcode_command(GCODE_COMMAND *gcmd) {
// extruder only runs one way and we have no "endstop", just set this point as home
startpoint.E = current_position.E = 0;
/*
Home F
*/
// F has been left at FEEDRATE_SLOW_Z by the last move, this is a usable "home"
// uncomment the following or substitute if you prefer a different default feedrate
// startpoint.F = FEEDRATE_SLOW_XY
break;
// G90 - absolute positioning
@ -439,14 +452,26 @@ void process_gcode_command(GCODE_COMMAND *gcmd) {
// reset watchdog
wd_reset();
}
SpecialMoveE(E_STARTSTOP_STEPS, FEEDRATE_FAST_E);
do {
// backup feedrate, move E very quickly then restore feedrate
uint32_t f = startpoint.F;
startpoint.F = FEEDRATE_FAST_E;
SpecialMoveE(E_STARTSTOP_STEPS, FEEDRATE_FAST_E);
startpoint.F = f;
} while (0);
break;
// M102- extruder reverse
// M103- extruder off
case 103:
SpecialMoveE(-E_STARTSTOP_STEPS, FEEDRATE_FAST_E);
do {
// backup feedrate, move E very quickly then restore feedrate
uint32_t f = startpoint.F;
startpoint.F = FEEDRATE_FAST_E;
SpecialMoveE(-E_STARTSTOP_STEPS, FEEDRATE_FAST_E);
startpoint.F = f;
} while (0);
break;
// M104- set temperature