josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

heater-stm32.c: rework init

This commit is contained in:
Nico Tonnhofer 2017-03-22 10:39:39 +01:00
parent 772d507a45
commit 635d40a42a
1 changed files with 16 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
heater-stm32.c
View File

@ -134,7 +134,7 @@ static const uint8_t software_pwm_needed = 0
void heater_init() {
/**
Pins on the STM32F411RE are usable as following, N are negated pin (active low)
some pins are commented out (-) because they are shared. You can change this
some pins are commented out (-) because they are shared. You can change this
in arduino_stm32f4xx. But take care! You could pwm two pins simultanious or disable
other important functions (serial connection).
PWM5 = TIM5 = Stepper timer.
@ -153,7 +153,7 @@ void heater_init() {
PIOA_10 PWM1/3 01 MOSI5, RX1
PIOA_11 PWM1/4 01 TX6, MISO4
- PIOA_15 PWM2/1 01 NSS1, TX1
PIOB_0 PWM1/2N, 3/3 01, 02 SCK5, CK5, AD8
PIOB_1 PWM1/3N, 3/4 01, 02 NSS4, WS5, AD9
- PIOB_3 PWM2/2 01 SDA2, SCK3
@ -172,14 +172,13 @@ void heater_init() {
- PIOC_7 PWM3/2 02 SCK2, RX6
- PIOC_8 PWM3/3 02 SDA3
- PIOC_9 PWM3/4 02 SDA3
*/
// Auto-generate pin setup.
#undef DEFINE_HEATER_ACTUAL
#undef DEFINE_HEATER_ACTUAL
#define DEFINE_HEATER_ACTUAL(name, pin, invert, pwm, ...) \
if (PWM_TYPE(pwm, pin) == HARDWARE_PWM) { \
if (PWM_TYPE(pwm, pin) == HARDWARE_PWM) { \
uint32_t freq; \
uint8_t macro_mask; \
if (pin ## _TIMER == TIM1) { \
RCC->APB2ENR |= RCC_APB2ENR_TIM1EN; } /* turn on TIM1 */ \
else if (pin ## _TIMER == TIM2) { \
@ -203,21 +202,18 @@ void heater_init() {
if (freq < 1) \
freq = 1; \
pin ## _TIMER->PSC = freq - 1; /* 1kHz */ \
macro_mask = pin ## _CHANNEL > 2 ? 2 : 1; \
if (macro_mask == 1) { \
pin ## _TIMER->CCMR1 |= 0x0D << (3 + (8 * (pin ## _CHANNEL / macro_mask - 1))); \
/* ch 2 / mm 1 - 1 = 1, ch 1 / mm 1 - 1 = 0*/ \
} else { \
pin ## _TIMER->CCMR2 |= 0x0D << (3 + (8 * (pin ## _CHANNEL / macro_mask - 1))); \
/* ch 4 / mm 2 - 1 = 1, ch 3 / mm 2 - 1 = 0*/ \
} \
if (pin ## _CHANNEL <= 2) \
pin ## _TIMER->CCMR1 |= 0x68UL << (8 * (pin ## _CHANNEL && 2)); \
else \
pin ## _TIMER->CCMR2 |= 0x68UL << (8 * (pin ## _CHANNEL && 4)); \
\
pin ## _TIMER->CCER |= EXPANDER(TIM_CCER_CC, pin ## _CHANNEL, E); \
/* output enable */ \
if (pin ## _INVERT ^ invert) { \
if (pin ## _INVERT ^ invert) \
pin ## _TIMER->CCER |= EXPANDER(TIM_CCER_CC, pin ## _CHANNEL, P); \
} else { \
pin ## _TIMER->CCER &= ~(EXPANDER(TIM_CCER_CC, pin ## _CHANNEL, P)); \
} \
else \
pin ## _TIMER->CCER &= ~(EXPANDER(TIM_CCER_CC, pin ## _CHANNEL, P)); \
\
/* invert the signal for negated timers*/ \
/* also with a XOR for inverted heaters */ \
pin ## _TIMER->EGR |= TIM_EGR_UG; /* update generation */ \
@ -257,8 +253,8 @@ void do_heater(heater_t index, uint8_t value) {
}
else {
*(heaters[index].bsrr) =
heaters[index].masked_pin <<
((value >= HEATER_THRESHOLD && ! heaters[index].invert) ?
heaters[index].masked_pin <<
((value >= HEATER_THRESHOLD && ! heaters[index].invert) ?
0 : 16);
}
if (value)