DDA: revert recent dda_start() changes.

Neither of them brought a performance improvement, so we revert
both. Commits as well as revert kept to preserve the knowledge
gained.

This reverts commits

  "DDA, dda_start(): use mb_tail_dda directly." and
  "DDA, dda_start(): don't pass mb_tail_dda as parameter."

Performance and binary size is back to what we had before:

  ATmega sizes               '168   '328(P)   '644(P)     '1280
  Program:  19270 bytes      135%       63%       31%       15%
     Data:   2179 bytes      213%      107%       54%       27%
   EEPROM:     32 bytes        4%        2%        2%        1%

  short-moves.gcode statistics:
  LED on occurences: 888.
  LED on time minimum: 218 clock cycles.
  LED on time maximum: 395 clock cycles.
  LED on time average: 249.051 clock cycles.

  smooth-curves.gcode statistics:
  LED on occurences: 23648.
  LED on time minimum: 237 clock cycles.
  LED on time maximum: 438 clock cycles.
  LED on time average: 272.216 clock cycles.

  triangle-odd.gcode statistics:
  LED on occurences: 1636.
  LED on time minimum: 237 clock cycles.
  LED on time maximum: 395 clock cycles.
  LED on time average: 262.572 clock cycles.

dda.c

@@ -482,6 +482,7 @@ void dda_create(DDA *dda, const TARGET *target) {
 }
 
 /*! Start a prepared DDA
+	\param *dda pointer to entry in dda_queue to start
 
 	This function actually begins the move described by the passed DDA entry.
 
@@ -491,51 +492,52 @@ void dda_create(DDA *dda, const TARGET *target) {
 
 	Called both inside and outside of interrupts.
 */
-void dda_start() {
+void dda_start(DDA *dda) {
+	// called from interrupt context: keep it simple!
 
   if (DEBUG_DDA && (debug_flags & DEBUG_DDA))
     sersendf_P(PSTR("Start: X %lq  Y %lq  Z %lq  F %lu\n"),
-               mb_tail_dda->endpoint.axis[X], mb_tail_dda->endpoint.axis[Y],
-               mb_tail_dda->endpoint.axis[Z], mb_tail_dda->endpoint.F);
+               dda->endpoint.axis[X], dda->endpoint.axis[Y],
+               dda->endpoint.axis[Z], dda->endpoint.F);
 
 		// get ready to go
 		psu_timeout = 0;
     #ifdef Z_AUTODISABLE
-      if (mb_tail_dda->delta[Z])
+      if (dda->delta[Z])
         z_enable();
     #endif
-		if (mb_tail_dda->endstop_check)
+		if (dda->endstop_check)
 			endstops_on();
 
 		// set direction outputs
-		x_direction(mb_tail_dda->x_direction);
-		y_direction(mb_tail_dda->y_direction);
-		z_direction(mb_tail_dda->z_direction);
-		e_direction(mb_tail_dda->e_direction);
+		x_direction(dda->x_direction);
+		y_direction(dda->y_direction);
+		z_direction(dda->z_direction);
+		e_direction(dda->e_direction);
 
 		#ifdef	DC_EXTRUDER
-    if (mb_tail_dda->delta[E])
+    if (dda->delta[E])
 			heater_set(DC_EXTRUDER, DC_EXTRUDER_PWM);
 		#endif
 
 		// initialise state variable
     move_state.counter[X] = move_state.counter[Y] = move_state.counter[Z] = \
-      move_state.counter[E] = -(mb_tail_dda->total_steps >> 1);
+      move_state.counter[E] = -(dda->total_steps >> 1);
     move_state.endstop_stop = 0;
 		#ifdef ACCELERATION_RAMPING
 			move_state.step_no = 0;
 		#endif
 		#ifdef ACCELERATION_TEMPORAL
-      memcpy(&move_state.steps[X], &mb_tail_dda->delta[X], sizeof(uint32_t) * 4);
+      memcpy(&move_state.steps[X], &dda->delta[X], sizeof(uint32_t) * 4);
       move_state.time[X] = move_state.time[Y] = \
         move_state.time[Z] = move_state.time[E] = 0UL;
 		#endif
 
 		// ensure this dda starts
-		mb_tail_dda->live = 1;
+		dda->live = 1;
 
 		// set timeout for first step
-    timer_set(mb_tail_dda->c, 0);
+    timer_set(dda->c, 0);
 	}
 
 /**

dda.h

@@ -187,7 +187,7 @@ void dda_new_startpoint(void);
 void dda_create(DDA *dda, const TARGET *target);
 
 // start a created DDA (called from timer interrupt)
-void dda_start(void);
+void dda_start(DDA *dda);
 
 // DDA takes one step (called from timer interrupt)
 void dda_step(DDA *dda);

dda_queue.c

@@ -71,7 +71,7 @@ void queue_step() {
     if (mb_tail != mb_head) {
       mb_tail = MB_NEXT(mb_tail);
       mb_tail_dda = &(movebuffer[mb_tail]);
-      dda_start();
+      dda_start(mb_tail_dda);
     }
     else {
       mb_tail_dda = NULL;
@@ -123,7 +123,7 @@ void enqueue_home(TARGET *t, uint8_t endstop_check, uint8_t endstop_stop_cond) {
       timer_reset();
       mb_tail = mb_head;  // Valid ONLY if the queue was empty before!
       mb_tail_dda = new_movebuffer; // Dito!
-      dda_start();
+      dda_start(mb_tail_dda);
       // Compensate for the cli() in timer_set().
       sei();
     }