diff --git a/copier.c b/copier.c
deleted file mode 100644
index 9317d9a..0000000
--- a/copier.c
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifdef	COPIER
-
-#include	"copier.h"
-
-#include	<avr/pgmspace.h>
-#include	<avr/boot.h>
-
-#include	"arduino.h"
-#include	"delay.h"
-
-uint32_t copier_xchange(uint32_t cmd) {
-	uint32_t r = 0, c = cmd;
-	uint8_t i = 0;
-
-	for (i = 0; i < 32; i++) {
-		WRITE(COPIER_MOSI, c & 0x80000000); delay_us(5);
-		c <<= 1;
-		WRITE(COPIER_SCK, 1); delay_us(5);
-		r = (r << 1) | (READ(COPIER_MISO)?1:0);
-		WRITE(COPIER_SCK, 0);
-	}
-
-	delay_us(5);
-
-	return r;
-}
-
-void init_chip(void);
-void init_chip() {
-	do {
-		WRITE(COPIER_SCK, 0);
-		// power up
-		WRITE(COPIER_RESET, 1);
-		delay_ms(10);
-		WRITE(COPIER_RESET, 0);
-		delay_ms(10);
-		// hopefully enter programming mode
-	} while ((copier_xchange(CMD_PROGRAMMING_ENABLE) & (CMD_PROGRAMMING_ENABLE >> 8)) != (CMD_PROGRAMMING_ENABLE >> 8));
-}
-
-void copy() {
-	// initialise
-	WRITE(COPIER_RESET, 0); SET_OUTPUT(COPIER_RESET);
-	WRITE(COPIER_SCK, 0); SET_OUTPUT(COPIER_SCK);
-	WRITE(COPIER_MOSI, 0); SET_OUTPUT(COPIER_MOSI);
-	SET_INPUT(COPIER_MISO); WRITE(COPIER_MISO, 1);
-
-	delay_ms(50);
-
-	init_chip();
-
-	// verify device signature- should be same as current chip since we haven't the space for the functionality necessary to program anything else
-	if ((copier_xchange(CMD_READ_SIGNATURE | 0x00) & 0xFF) != SIGNATURE_0)
-		return;
-	if ((copier_xchange(CMD_READ_SIGNATURE | 0x01) & 0xFF) != SIGNATURE_1)
-		return;
-	if ((copier_xchange(CMD_READ_SIGNATURE | 0x02) & 0xFF) != SIGNATURE_2)
-		return;
-
-	// erase chip
-	copier_xchange(CMD_CHIP_ERASE);
-	delay_ms(15); //minimum is 9.0ms
-
-	// re-initialise
-	init_chip();
-
-	uint8_t f;
-	// copy fuses
-	// first low byte
-	f = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS);
-	copier_xchange(CMD_WRITE_FUSE_BITS | f);
-
-	// high byte
-	f = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS);
-	copier_xchange(CMD_WRITE_FUSE_HIGH_BITS | f);
-
-	// extended byte
-	f = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS);
-	copier_xchange(CMD_WRITE_FUSE_EXTENDED_BITS | f);
-
-	// start copying flash
-	uint16_t i;
-	for (i = 0; i < (FLASHEND / 2); i += (SPM_PAGESIZE / 2)) {
-		uint8_t j;
-		for (j = 0; j < (SPM_PAGESIZE / 2); j++) {
-			uint16_t w = pgm_read_word_near((i | j) << 1);
-			copier_xchange(CMD_LOAD_PROGMEM_LOW_BYTE | (j << 8) | (w & 0xFF));
-			copier_xchange(CMD_LOAD_PROGMEM_HIGH_BYTE | (j << 8) | (w >> 8));
-		}
-		copier_xchange(CMD_WRITE_PROGMEM_PAGE | ((i / (SPM_PAGESIZE / 2)) << 8));
-		delay_ms(10); //minimum is 4.5ms
-	}
-
-	// reset
-	delay_ms(10);
-	SET_INPUT(MOSI);
-	SET_INPUT(SCK);
-	SET_INPUT(COPIER_RESET);
-}
-
-#endif	/* COPIER */
diff --git a/copier.h b/copier.h
deleted file mode 100644
index 5fde02b..0000000
--- a/copier.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef	_COPIER_H
-#define	_COPIER_H
-
-// operation instructions
-#define		CMD_PROGRAMMING_ENABLE				0xAC530000
-#define		CMD_CHIP_ERASE								0xAC800000
-#define		CMD_POLL											0xF0000000
-
-// load instructions
-#define		CMD_LOAD_EXTENDED_ADDRESS			0x4D000000
-#define		CMD_LOAD_PROGMEM_HIGH_BYTE		0x48000000
-#define		CMD_LOAD_PROGMEM_LOW_BYTE			0x40000000
-#define		CMD_LOAD_EEPROM_PAGE					0xC1000000
-
-// read instructions
-#define		CMD_READ_PROGMEM_HIGH_BYTE		0x28000000
-#define		CMD_READ_PROGMEM_LOW_BYTE			0x20000000
-#define		CMD_READ_EEPROM								0xA0000000
-#define		CMD_READ_LOCK_BITS						0x58000000
-#define		CMD_READ_SIGNATURE						0x30000000
-#define		CMD_READ_FUSE_BITS						0x50000000
-#define		CMD_READ_FUSE_HIGH_BITS				0x58080000
-#define		CMD_READ_FUSE_EXTENDED_BITS		0x50080000
-#define		CMD_READ_CALIBRATION_BYTE			0x38000000
-
-// write instructions
-#define		CMD_WRITE_PROGMEM_PAGE				0x4C000000
-#define		CMD_WRITE_EEPROM							0xC0000000
-#define		CMD_WRITE_EEPROM_PAGE					0xC2000000
-#define		CMD_WRITE_LOCK_BITS						0xACE00000
-#define		CMD_WRITE_FUSE_BITS						0xACA00000
-#define		CMD_WRITE_FUSE_HIGH_BITS			0xACA80000
-#define		CMD_WRITE_FUSE_EXTENDED_BITS	0xACA40000
-
-//pinout
-#define		COPIER_RESET			AIO1
-#define		COPIER_SCK				AIO2
-#define		COPIER_MOSI				AIO3
-#define		COPIER_MISO				AIO4
-
-//functions
-
-void copy(void);
-
-#endif	/* _COPIER_H */