From 9c126e3387c2272937b913f6367c2a4d19eaedef Mon Sep 17 00:00:00 2001
From: Markus Hitter <mah@jump-ing.de>
Date: Fri, 11 May 2012 16:43:34 +0200
Subject: [PATCH] Adjust config.gen7-v1.4.h for Gen7 v1.4.

This means:

- Max endstops are gone.

- Min endstops are now PB0 / PB1 / PB2.

- Order of the steppers is inverted (X Y Z E instead of E Z Y X).

- All pins on port A one to the left (pin number - 1).
---
 config.gen7-v1.4.h | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/config.gen7-v1.4.h b/config.gen7-v1.4.h
index 7aa0034..db784e2 100644
--- a/config.gen7-v1.4.h
+++ b/config.gen7-v1.4.h
@@ -200,9 +200,9 @@
 	or adjust your electronics to suit this
 */
 
-#define	X_STEP_PIN						DIO19
-#define	X_DIR_PIN							DIO18
-#define	X_MIN_PIN							DIO7
+#define	X_STEP_PIN						DIO29
+#define	X_DIR_PIN							DIO28
+#define	X_MIN_PIN							DIO0
 //#define	X_MAX_PIN							xxxx
 //#define	X_ENABLE_PIN					xxxx
 //#define	X_INVERT_DIR
@@ -210,9 +210,9 @@
 //#define	X_INVERT_MAX
 //#define	X_INVERT_ENABLE
 
-#define	Y_STEP_PIN						DIO23
-#define	Y_DIR_PIN							DIO22
-#define	Y_MIN_PIN							DIO5
+#define	Y_STEP_PIN						DIO27
+#define	Y_DIR_PIN							DIO26
+#define	Y_MIN_PIN							DIO1
 //#define	Y_MAX_PIN							xxxx
 //#define	Y_ENABLE_PIN					xxxx
 //#define	Y_INVERT_DIR
@@ -220,9 +220,9 @@
 //#define	Y_INVERT_MAX
 //#define	Y_INVERT_ENABLE
 
-#define	Z_STEP_PIN						DIO26
-#define	Z_DIR_PIN							DIO25
-#define	Z_MIN_PIN							DIO1
+#define	Z_STEP_PIN						DIO23
+#define	Z_DIR_PIN							DIO22
+#define	Z_MIN_PIN							DIO2
 //#define	Z_MAX_PIN							xxxx
 //#define	Z_ENABLE_PIN					xxxx
 //#define	Z_INVERT_DIR
@@ -230,14 +230,14 @@
 //#define	Z_INVERT_MAX
 //#define	Z_INVERT_ENABLE
 
-#define	E_STEP_PIN						DIO28
-#define	E_DIR_PIN							DIO27
+#define	E_STEP_PIN						DIO19
+#define	E_DIR_PIN							DIO18
 //#define E_ENABLE_PIN
 //#define	E_INVERT_DIR
 //#define	E_INVERT_ENABLE
 
 #define	PS_ON_PIN							DIO15
-#define STEPPER_ENABLE_PIN		DIO24
+#define STEPPER_ENABLE_PIN		DIO25
 #define	STEPPER_INVERT_ENABLE
 
 
@@ -290,8 +290,8 @@
 #endif
 
 //                 name       type            pin        additional
-DEFINE_TEMP_SENSOR(extruder,  TT_THERMISTOR,  PINA1,     THERMISTOR_EXTRUDER)
-DEFINE_TEMP_SENSOR(bed,       TT_THERMISTOR,  PINA2,     THERMISTOR_BED)
+DEFINE_TEMP_SENSOR(extruder,  TT_THERMISTOR,  PINA0,     THERMISTOR_EXTRUDER)
+DEFINE_TEMP_SENSOR(bed,       TT_THERMISTOR,  PINA1,     THERMISTOR_BED)
 
 
 
@@ -335,8 +335,8 @@ DEFINE_TEMP_SENSOR(bed,       TT_THERMISTOR,  PINA2,     THERMISTOR_BED)
 #endif
 
 //               name      port   pin    pwm
-DEFINE_HEATER(extruder,	PB4)
-DEFINE_HEATER(bed, PB3)
+DEFINE_HEATER(extruder,	DIO4)
+DEFINE_HEATER(bed, DIO3)
 
 /// and now because the c preprocessor isn't as smart as it could be,
 /// uncomment the ones you've listed above and comment the rest.