diff --git a/Makefile-ARM b/Makefile-ARM index 0a5bb4f..08a4d08 100644 --- a/Makefile-ARM +++ b/Makefile-ARM @@ -42,6 +42,7 @@ MCU ?= lpc1114 # MCU ?= stm32f411 +# MCU ?= stm32f446 # some size parameters. Not important for flashing and compiling. ifeq ($(MCU), lpc1114) @@ -50,6 +51,9 @@ ifeq ($(MCU), lpc1114) else ifeq ($(MCU), stm32f411) FLASH_SIZE = 512 RAM_SIZE = 128 +else ifeq ($(MCU), stm32f446) + FLASH_SIZE = 512 + RAM_SIZE = 128 endif # CPU clock rate not defined here, but in the CMSIS headers. @@ -85,7 +89,7 @@ F_CRYSTAL ?= 12000000 ifeq ($(MCU), lpc1114) UPLOADER ?= lpc21isp -control UPLOAD_FILE = $(PROGRAM).hex -else ifeq ($(MCU), stm32f411) +else ifeq ($(findstring stm32, $(MCU)), stm32) UPLOADER ?= st-flash --reset write UPLOAD_FILE = $(BUILDDIR)/$(PROGRAM).bin endif @@ -94,7 +98,7 @@ ifeq ($(MCU), lpc1114) UPLOADER_FLAGS = $(UPLOADER_PORT) UPLOADER_FLAGS += 115200 UPLOADER_FLAGS += $(F_CRYSTAL) -else ifeq ($(MCU), stm32f411) +else ifeq ($(findstring stm32, $(MCU)), stm32) UPLOADER_FLAGS = 0x8000000 endif @@ -120,9 +124,9 @@ SOURCES = $(wildcard *.c) # Other target MCU specific adjustments: ifeq ($(MCU), lpc1114) - STARTUP_FILE = cmsis-startup_lpc11xx.s -else ifeq ($(MCU), stm32f411) - STARTUP_FILE = cmsis-startup_stm32f411xe.s + STARTUP_FILE = cmsis-startup_lpc11xx.S +else ifeq ($(findstring stm32, $(MCU)), stm32) + STARTUP_FILE = cmsis-startup_stm32f4xx.S endif # Link time optimization is on by default @@ -135,7 +139,7 @@ ifeq ($(MCU), lpc1114) CFLAGS += -mthumb -mcpu=cortex-m0 CFLAGS += -mtune=cortex-m0 CFLAGS += -D__ARM_LPC1114__ -else ifeq ($(MCU), stm32f411) +else ifeq ($(findstring stm32, $(MCU)), stm32) CFLAGS += -mthumb -mcpu=cortex-m4 CFLAGS += -mtune=cortex-m4 CFLAGS += -D__ARM_STM32F411__ @@ -144,6 +148,14 @@ else ifeq ($(MCU), stm32f411) CFLAGS += -mlittle-endian CFLAGS += -D__FPU_PRESENT=1 CFLAGS += -fomit-frame-pointer + CFLAGS += -nostartfiles +endif +ifeq ($(MCU), stm32f411) + CFLAGS += -DSTM32F411xE + CFLAGS += -D__SYSTEM_CLOCK=100000000 +else ifeq ($(MCU), stm32f446) + CFLAGS += -DSTM32F446xx + CFLAGS += -D__SYSTEM_CLOCK=180000000 endif # Other options ... CFLAGS += -Wall @@ -160,8 +172,8 @@ LDFLAGS = --specs=nano.specs LDFLAGS += --specs=nosys.specs ifeq ($(MCU), lpc1114) LDFLAGS += -T cmsis-lpc1114.ld -else ifeq ($(MCU), stm32f411) - LDFLAGS += -T cmsis-stm32f411xe.ld +else ifeq ($(findstring stm32, $(MCU)), stm32) + LDFLAGS += -T cmsis-stm32f4xx.ld endif LDFLAGS += -Wl,--as-needed LDFLAGS += -Wl,--gc-sections @@ -176,9 +188,6 @@ LIBS = -lm all: $(PROGRAM).hex $(BUILDDIR)/$(PROGRAM).lst $(BUILDDIR)/$(PROGRAM).sym size -# TODO: The echo is only for Gen7-ARM LPC1114. The stm flashes don't need this. -# This message could confuse someone. Remove this message for stm or write some -# friendly text for it. ifeq ($(MCU), lpc1114) define upload_echo @echo @@ -188,11 +197,10 @@ define upload_echo @echo "Gen7-ARM, PIO0_1 is the Step pin of the Z stepper driver." @echo endef -else ifeq ($(MCU), stm32f411) +else ifeq ($(findstring stm32, $(MCU)), stm32) define upload_echo @echo @echo "Starting upload..." - @echo "This should normally take no time." @echo endef endif diff --git a/cmsis-startup_lpc11xx.s b/cmsis-startup_lpc11xx.S similarity index 99% rename from cmsis-startup_lpc11xx.s rename to cmsis-startup_lpc11xx.S index e9c7563..7315437 100644 --- a/cmsis-startup_lpc11xx.s +++ b/cmsis-startup_lpc11xx.S @@ -222,4 +222,3 @@ Reset_Handler: def_irq_default_handler DEF_IRQHandler .end - diff --git a/cmsis-startup_stm32f411xe.s b/cmsis-startup_stm32f411xe.s deleted file mode 100644 index 8950a21..0000000 --- a/cmsis-startup_stm32f411xe.s +++ /dev/null @@ -1,459 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f411xe.s - * @author MCD Application Team - * @version V2.3.0 - * @date 02-March-2015 - * @brief STM32F411xExx Devices vector table for Atollic TrueSTUDIO toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M4 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m4 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss -/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ - -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr sp, =_estack /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - //bl __libc_init_array -/* Call the application's entry point.*/ - //bl main - // Calling the crt0 'cold-start' entry point. There __libc_init_array is called - // and when existing hardware_init_hook() and software_init_hook() before - // starting main(). software_init_hook() is available and has to be called due - // to initializsation when using rtos. - bl _start - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - - /* External Interrupts */ - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_IRQHandler /* PVD through EXTI Line detection */ - .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ - .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_IRQHandler /* EXTI Line0 */ - .word EXTI1_IRQHandler /* EXTI Line1 */ - .word EXTI2_IRQHandler /* EXTI Line2 */ - .word EXTI3_IRQHandler /* EXTI Line3 */ - .word EXTI4_IRQHandler /* EXTI Line4 */ - .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ - .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ - .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ - .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ - .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ - .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ - .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ - .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word EXTI9_5_IRQHandler /* External Line[9:5]s */ - .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ - .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ - .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM4_IRQHandler /* TIM4 */ - .word I2C1_EV_IRQHandler /* I2C1 Event */ - .word I2C1_ER_IRQHandler /* I2C1 Error */ - .word I2C2_EV_IRQHandler /* I2C2 Event */ - .word I2C2_ER_IRQHandler /* I2C2 Error */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word EXTI15_10_IRQHandler /* External Line[15:10]s */ - .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ - .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ - .word 0 /* Reserved */ - .word SDIO_IRQHandler /* SDIO */ - .word TIM5_IRQHandler /* TIM5 */ - .word SPI3_IRQHandler /* SPI3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ - .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ - .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ - .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ - .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word OTG_FS_IRQHandler /* USB OTG FS */ - .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ - .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ - .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ - .word USART6_IRQHandler /* USART6 */ - .word I2C3_EV_IRQHandler /* I2C3 event */ - .word I2C3_ER_IRQHandler /* I2C3 error */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word FPU_IRQHandler /* FPU */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word SPI4_IRQHandler /* SPI4 */ - .word SPI5_IRQHandler /* SPI5 */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMP_STAMP_IRQHandler - .thumb_set TAMP_STAMP_IRQHandler,Default_Handler - - .weak RTC_WKUP_IRQHandler - .thumb_set RTC_WKUP_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Stream0_IRQHandler - .thumb_set DMA1_Stream0_IRQHandler,Default_Handler - - .weak DMA1_Stream1_IRQHandler - .thumb_set DMA1_Stream1_IRQHandler,Default_Handler - - .weak DMA1_Stream2_IRQHandler - .thumb_set DMA1_Stream2_IRQHandler,Default_Handler - - .weak DMA1_Stream3_IRQHandler - .thumb_set DMA1_Stream3_IRQHandler,Default_Handler - - .weak DMA1_Stream4_IRQHandler - .thumb_set DMA1_Stream4_IRQHandler,Default_Handler - - .weak DMA1_Stream5_IRQHandler - .thumb_set DMA1_Stream5_IRQHandler,Default_Handler - - .weak DMA1_Stream6_IRQHandler - .thumb_set DMA1_Stream6_IRQHandler,Default_Handler - - .weak ADC_IRQHandler - .thumb_set ADC_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM9_IRQHandler - .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM10_IRQHandler - .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM11_IRQHandler - .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak OTG_FS_WKUP_IRQHandler - .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler - - .weak DMA1_Stream7_IRQHandler - .thumb_set DMA1_Stream7_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak DMA2_Stream0_IRQHandler - .thumb_set DMA2_Stream0_IRQHandler,Default_Handler - - .weak DMA2_Stream1_IRQHandler - .thumb_set DMA2_Stream1_IRQHandler,Default_Handler - - .weak DMA2_Stream2_IRQHandler - .thumb_set DMA2_Stream2_IRQHandler,Default_Handler - - .weak DMA2_Stream3_IRQHandler - .thumb_set DMA2_Stream3_IRQHandler,Default_Handler - - .weak DMA2_Stream4_IRQHandler - .thumb_set DMA2_Stream4_IRQHandler,Default_Handler - - .weak OTG_FS_IRQHandler - .thumb_set OTG_FS_IRQHandler,Default_Handler - - .weak DMA2_Stream5_IRQHandler - .thumb_set DMA2_Stream5_IRQHandler,Default_Handler - - .weak DMA2_Stream6_IRQHandler - .thumb_set DMA2_Stream6_IRQHandler,Default_Handler - - .weak DMA2_Stream7_IRQHandler - .thumb_set DMA2_Stream7_IRQHandler,Default_Handler - - .weak USART6_IRQHandler - .thumb_set USART6_IRQHandler,Default_Handler - - .weak I2C3_EV_IRQHandler - .thumb_set I2C3_EV_IRQHandler,Default_Handler - - .weak I2C3_ER_IRQHandler - .thumb_set I2C3_ER_IRQHandler,Default_Handler - - .weak FPU_IRQHandler - .thumb_set FPU_IRQHandler,Default_Handler - - .weak SPI4_IRQHandler - .thumb_set SPI4_IRQHandler,Default_Handler - - .weak SPI5_IRQHandler - .thumb_set SPI5_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/cmsis-startup_stm32f4xx.S b/cmsis-startup_stm32f4xx.S new file mode 100644 index 0000000..1e1cc49 --- /dev/null +++ b/cmsis-startup_stm32f4xx.S @@ -0,0 +1,289 @@ +// Startup for STM32F4xx Cortex-M4 ARM MCU + +// Copyright (C)2013-2018, Philip Munts, President, Munts AM Corp. +// Copyright (C)2019, Nico Tonnhofer +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// * Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. + + .syntax unified + .thumb + .section .startup, "x" + +// Export these symbols + + .global _startup + .global _vectors + +// Import these symbols + + .extern __text_end__ + .extern __data_beg__ + .extern __data_end__ + .extern __bss_beg__ + .extern __bss_end__ + .extern __stack_end__ + .extern __ctors_start__ + .extern __ctors_end__ + .extern main + .extern _exit + +//============================================================================= + +// Use Default_handler for all exceptions and interrupts, unless another +// handler is provided elsewhere. + + .macro IRQ handler + .word \handler + .weak \handler + .set \handler, Default_Handler + .endm + +//============================================================================= + +// Exception vector table--Common to all Cortex-M4 + +_vectors: .word __stack_end__ + .word _startup + IRQ NMI_Handler + IRQ HardFault_Handler + IRQ MemManage_Handler + IRQ BusFault_Handler + IRQ UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + IRQ SVC_Handler + IRQ DebugMon_Handler + .word 0 + IRQ PendSV_Handler + IRQ SysTick_Handler + +// Hardware interrupts specific to the STM32F411RE + + IRQ WWDG_IRQHandler + IRQ PVD_IRQHandler + IRQ TAMP_STAMP_IRQHandler + IRQ RTC_WKUP_IRQHandler + IRQ FLASH_IRQHandler + IRQ RCC_IRQHandler + IRQ EXTI0_IRQHandler + IRQ EXTI1_IRQHandler + IRQ EXTI2_IRQHandler + IRQ EXTI3_IRQHandler + IRQ EXTI4_IRQHandler + IRQ DMA1_Stream0_IRQHandler + IRQ DMA1_Stream1_IRQHandler + IRQ DMA1_Stream2_IRQHandler + IRQ DMA1_Stream3_IRQHandler + IRQ DMA1_Stream4_IRQHandler + IRQ DMA1_Stream5_IRQHandler + IRQ DMA1_Stream6_IRQHandler + IRQ ADC_IRQHandler +#ifdef STM32F446xx + IRQ CAN1_TX_IRQHandler + IRQ CAN1_RX0_IRQHandler + IRQ CAN1_RX1_IRQHandler + IRQ CAN1_SCE_IRQHandler +#else + .word 0 + .word 0 + .word 0 + .word 0 +#endif + IRQ EXTI9_5_IRQHandler + IRQ TIM1_BRK_TIM9_IRQHandler + IRQ TIM1_UP_TIM10_IRQHandler + IRQ TIM1_TRG_COM_TIM11_IRQHandler + IRQ TIM1_CC_IRQHandler + IRQ TIM2_IRQHandler + IRQ TIM3_IRQHandler + IRQ TIM4_IRQHandler + IRQ I2C1_EV_IRQHandler + IRQ I2C1_ER_IRQHandler + IRQ I2C2_EV_IRQHandler + IRQ I2C2_ER_IRQHandler + IRQ SPI1_IRQHandler + IRQ SPI2_IRQHandler + IRQ USART1_IRQHandler + IRQ USART2_IRQHandler +#ifdef STM32F446xx + IRQ USART3_IRQHandler +#else + .word 0 +#endif + IRQ EXTI15_10_IRQHandler + IRQ RTC_Alarm_IRQHandler +#ifdef STM32F446xx + IRQ OTG_FS_WKUP_IRQHandler + IRQ TIM8_BRK_TIM12_IRQHandler + IRQ TIM8_UP_TIM13_IRQHandler + IRQ TIM8_TRG_COM_TIM14_IRQHandler + IRQ TIM8_CC_IRQHandler +#else + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 +#endif + IRQ DMA1_Stream7_IRQHandler +#ifdef STM32F446xx + IRQ FMC_IRQHandler +#else + .word 0 +#endif + IRQ SDIO_IRQHandler + IRQ TIM5_IRQHandler + IRQ SPI3_IRQHandler +#ifdef STM32F446xx + IRQ UART4_IRQHandler + IRQ UART5_IRQHandler + IRQ TIM6_DAC_IRQHandler + IRQ TIM7_IRQHandler +#else + .word 0 + .word 0 + .word 0 + .word 0 +#endif + IRQ DMA2_Stream0_IRQHandler + IRQ DMA2_Stream1_IRQHandler + IRQ DMA2_Stream2_IRQHandler + IRQ DMA2_Stream3_IRQHandler + IRQ DMA2_Stream4_IRQHandler + .word 0 + .word 0 +#ifdef STM32F446xx + IRQ CAN2_TX_IRQHandler + IRQ CAN2_RX0_IRQHandler + IRQ CAN2_RX1_IRQHandler + IRQ CAN2_SCE_IRQHandler +#else + .word 0 + .word 0 + .word 0 + .word 0 +#endif + IRQ OTG_FS_IRQHandler + IRQ DMA2_Stream5_IRQHandler + IRQ DMA2_Stream6_IRQHandler + IRQ DMA2_Stream7_IRQHandler + IRQ USART6_IRQHandler + IRQ I2C3_EV_IRQHandler + IRQ I2C3_ER_IRQHandler +#ifdef STM32F446xx + IRQ OTG_HS_EP1_OUT_IRQHandler + IRQ OTG_HS_EP1_IN_IRQHandler + IRQ OTG_HS_WKUP_IRQHandler + IRQ OTG_HS_IRQHandler + IRQ DCMI_IRQHandler +#else + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 +#endif + .word 0 + .word 0 + IRQ FPU_IRQHandler + .word 0 + .word 0 + IRQ SPI4_IRQHandler + IRQ SPI5_IRQHandler + +//============================================================================= + +// Default exception handler--does nothing but return + + .thumb_func +Default_Handler: bx lr + +//============================================================================= + +// Reset vector: Set up environment to call C main() + + .thumb_func +_startup: + +// Copy initialized data from flash to RAM + +copy_data: ldr r1, DATA_BEG + ldr r2, TEXT_END + ldr r3, DATA_END + subs r3, r3, r1 // Length of initialized data + beq zero_bss // Skip if none + +copy_data_loop: ldrb r4, [r2], #1 // Read byte from flash + strb r4, [r1], #1 // Store byte to RAM + subs r3, r3, #1 // Decrement counter + bgt copy_data_loop // Repeat until done + +// Zero uninitialized data (bss) + +zero_bss: ldr r1, BSS_BEG + ldr r3, BSS_END + subs r3, r3, r1 // Length of uninitialized data + beq call_ctors // Skip if none + + mov r2, #0 + +zero_bss_loop: strb r2, [r1], #1 // Store zero + subs r3, r3, #1 // Decrement counter + bgt zero_bss_loop // Repeat until done + +// Call C++ constructors. The compiler and linker together populate the .ctors +// code section with the addresses of the constructor functions. + +call_ctors: ldr r0, CTORS_BEG + ldr r1, CTORS_END + subs r1, r1, r0 // Length of ctors section + beq call_main // Skip if no constructors + +ctors_loop: ldr r2, [r0], #4 // Load next constructor address + push {r0,r1} // Save registers + blx r2 // Call constructor + pop {r0,r1} // Restore registers + subs r1, r1, #4 // Decrement counter + bgt ctors_loop // Repeat until done + +// Call main() + +call_main: mov r0, #0 // argc=0 + mov r1, #0 // argv=NULL + + bl SystemInit // Call SystemInit() + bl main // Call C main() + bl _exit // Call _exit() if main() returns + +//============================================================================= + +// These are filled in by the linker + + .align 4 +TEXT_END: .word __text_end__ +DATA_BEG: .word __data_beg__ +DATA_END: .word __data_end__ +BSS_BEG: .word __bss_beg__ +BSS_END: .word __bss_end__ +CTORS_BEG: .word __ctors_start__ +CTORS_END: .word __ctors_end__ + + .end diff --git a/cmsis-stm32f411xe.ld b/cmsis-stm32f411xe.ld deleted file mode 100644 index c028371..0000000 --- a/cmsis-stm32f411xe.ld +++ /dev/null @@ -1,153 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K - RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * _estack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/cmsis-stm32f4xx.h b/cmsis-stm32f4xx.h index 69cb392..3d73387 100644 --- a/cmsis-stm32f4xx.h +++ b/cmsis-stm32f4xx.h @@ -2,58 +2,48 @@ ****************************************************************************** * @file stm32f4xx.h * @author MCD Application Team - * @version V2.3.2 - * @date 26-June-2015 - * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File. + * @version V1.8.0 + * @date 09-November-2016 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F4xx devices. * * The file is the unique include file that the application programmer * is using in the C source code, usually in main.c. This file contains: * - Configuration section that allows to select: - * - The STM32F4xx device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers * rather than drivers API), this option is controlled by - * "#define USE_HAL_DRIVER" + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripherals registers declarations and bits definition + * - Macros to access peripheral’s registers hardware * ****************************************************************************** * @attention * - *

© COPYRIGHT(c) 2015 STMicroelectronics

+ *

© COPYRIGHT 2016 STMicroelectronics

* - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. * ****************************************************************************** */ -/* - Notes for Teacup: - - Copied from $(MBED)/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/stm32f411xe.h and stm32f4xx.h - - - Prefixed names of #include files with cmsis- to match the names of the - copies in the Teacup repo. - - Prefixed function names with mbed_ to not conflict with Teacup names. - - Comment out HAL_DRIVERS +/* changes for Teacup + - replace type-casts in defines with 'UL', so we can use this in precompiler macros */ /** @addtogroup CMSIS @@ -67,51 +57,124 @@ #ifndef __STM32F4xx_H #define __STM32F4xx_H +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + /** @addtogroup Library_configuration_section * @{ */ -/** - * @brief STM32 Family - */ -#if !defined (STM32F4) -#define STM32F4 -#endif /* STM32F4 */ - /* Uncomment the line below according to the target STM32 device used in your application */ -#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \ - !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \ - !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE) && !defined (STM32F446xx) - /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */ - /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */ - /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */ - /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */ - /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */ - /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */ - /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG, - STM32F439NI, STM32F429IG and STM32F429II Devices */ - /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, - STM32F439NI, STM32F439IG and STM32F439II Devices */ - /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */ - /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */ - #define STM32F411xE /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */ - /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC, - and STM32F446ZE Devices */ -#endif + +#if !defined(STM32F40_41xxx) && !defined(STM32F427_437xx) && !defined(STM32F429_439xx) && !defined(STM32F401xx) && !defined(STM32F410xx) && \ + !defined(STM32F411xE) && !defined(STM32F412xG) && !defined(STM32F413_423xx) && !defined(STM32F446xx) && !defined(STM32F469_479xx) + /* #define STM32F40_41xxx */ /*!< STM32F405RG, STM32F405VG, STM32F405ZG, STM32F415RG, STM32F415VG, STM32F415ZG, + STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG, STM32F407IE, + STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */ + + /* #define STM32F427_437xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG, STM32F427II, + STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG, STM32F437II Devices */ + + /* #define STM32F429_439xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, + STM32F429NG, STM32F439NI, STM32F429IG, STM32F429II, STM32F439VG, STM32F439VI, + STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, STM32F439NI, + STM32F439IG and STM32F439II Devices */ + + /* #define STM32F401xx */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB, STM32F401VC, + STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CExx, STM32F401RE and STM32F401VE Devices */ + + /* #define STM32F410xx */ /*!< STM32F410Tx, STM32F410Cx and STM32F410Rx */ + + /* #define STM32F411xE */ /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */ + + /* #define STM32F412xG */ /*!< STM32F412CEU, STM32F412CGU, STM32F412ZET, STM32F412ZGT, STM32F412ZEJ, STM32F412ZGJ, + STM32F412VET, STM32F412VGT, STM32F412VEH, STM32F412VGH, STM32F412RET, STM32F412RGT, + STM32F412REY and STM32F412RGY Devices */ + + /* #define STM32F413_423xx */ /*!< STM32F413CGU, STM32F413CHU, STM32F413MGY, STM32F413MHY, STM32F413RGT, STM32F413VGT, + STM32F413ZGT, STM32F413RHT, STM32F413VHT, STM32F413ZHT, STM32F413VGH, STM32F413ZGJ, + STM32F413VHH, STM32F413ZHJ, STM32F423CHU, STM32F423RHT, STM32F423VHT, STM32F423ZHT, + STM32F423VHH and STM32F423ZHJ devices */ + + /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC + and STM32F446ZE Devices */ + + /* #define STM32F469_479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG, + STM32F479NG, STM32F479AE, STM32F479IE, STM32F479BE, STM32F479NE Devices */ + +#endif /* STM32F40_41xxx && STM32F427_437xx && STM32F429_439xx && STM32F401xx && STM32F410xx && STM32F411xE && STM32F412xG && STM32F413_423xx && STM32F446xx && STM32F469_479xx */ + +/* Old STM32F40XX definition, maintained for legacy purpose */ +#ifdef STM32F40XX + #define STM32F40_41xxx +#endif /* STM32F40XX */ + +/* Old STM32F427X definition, maintained for legacy purpose */ +#ifdef STM32F427X + #define STM32F427_437xx +#endif /* STM32F427X */ + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined(STM32F40_41xxx) && !defined(STM32F427_437xx) && !defined(STM32F429_439xx) && !defined(STM32F401xx) && !defined(STM32F410xx) && \ + !defined(STM32F411xE) && !defined(STM32F412xG) && !defined(STM32F413_423xx) && !defined(STM32F446xx) && !defined(STM32F469_479xx) + #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)" +#endif /* STM32F40_41xxx && STM32F427_437xx && STM32F429_439xx && STM32F401xx && STM32F410xx && STM32F411xE && STM32F412xG && STM32F413_23xx && STM32F446xx && STM32F469_479xx */ + +#if !defined (USE_STDPERIPH_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER */ +#endif /* USE_STDPERIPH_DRIVER */ /** - * @brief CMSIS Device version number V2.3.2 + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. */ -#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ -#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ -#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ -#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\ - |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\ - |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\ - |(__STM32F4xx_CMSIS_DEVICE_VERSION)) +#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || \ + defined(STM32F410xx) || defined(STM32F411xE) || defined(STM32F469_479xx) + #if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #endif /* HSE_VALUE */ +#elif defined (STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) + #if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* HSE_VALUE */ +#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE || STM32F469_479xx */ +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (0x05000U) /*!< Time out for HSE start up */ +#endif /* HSE_STARTUP_TIMEOUT */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief STM32F4XX Standard Peripherals Library version number V1.8.0 + */ +#define __STM32F4XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x08) /*!< [23:16] sub1 version */ +#define __STM32F4XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F4XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F4XX_STDPERIPH_VERSION ((__STM32F4XX_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F4XX_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F4XX_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F4XX_STDPERIPH_VERSION_RC)) /** * @} @@ -122,27 +185,19 @@ */ /** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ #define __CM4_REV 0x0001 /*!< Core revision r0p1 */ #define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */ #define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ #define __FPU_PRESENT 1 /*!< FPU present */ -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - /** * @brief STM32F4XX Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section */ -typedef enum +typedef enum IRQn { /****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ @@ -173,6 +228,258 @@ typedef enum DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + +#if defined(STM32F40_41xxx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81 /*!< FPU global interrupt */ +#endif /* STM32F40_41xxx */ + +#if defined(STM32F427_437xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ +#endif /* STM32F427_437xx */ + +#if defined(STM32F429_439xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ +#endif /* STM32F429_439xx */ + +#if defined(STM32F410xx) + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global Interrupt and DAC Global Interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + RNG_IRQn = 80, /*!< RNG global Interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + FMPI2C1_EV_IRQn = 95, /*!< FMPI2C1 Event Interrupt */ + FMPI2C1_ER_IRQn = 96, /*!< FMPI2C1 Error Interrupt */ + LPTIM1_IRQn = 97 /*!< LPTIM1 interrupt */ +#endif /* STM32F410xx */ + +#if defined(STM32F401xx) || defined(STM32F411xE) EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ @@ -208,9 +515,303 @@ typedef enum USART6_IRQn = 71, /*!< USART6 global interrupt */ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ +#if defined(STM32F401xx) + SPI4_IRQn = 84 /*!< SPI4 global Interrupt */ +#endif /* STM32F411xE */ +#if defined(STM32F411xE) SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ SPI5_IRQn = 85 /*!< SPI5 global Interrupt */ +#endif /* STM32F411xE */ +#endif /* STM32F401xx || STM32F411xE */ + +#if defined(STM32F469_479xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + QUADSPI_IRQn = 91, /*!< QUADSPI global Interrupt */ + DSI_IRQn = 92 /*!< DSI global Interrupt */ +#endif /* STM32F469_479xx */ + +#if defined(STM32F446xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< QuadSPI global Interrupt */ + CEC_IRQn = 93, /*!< QuadSPI global Interrupt */ + SPDIF_RX_IRQn = 94, /*!< QuadSPI global Interrupt */ + FMPI2C1_EV_IRQn = 95, /*!< FMPI2C Event Interrupt */ + FMPI2C1_ER_IRQn = 96 /*!< FMPCI2C Error Interrupt */ +#endif /* STM32F446xx */ + +#if defined(STM32F412xG) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + DFSDM1_FLT0_IRQn = 61, /*!< DFSDM1 Filter 0 global Interrupt */ + DFSDM1_FLT1_IRQn = 62, /*!< DFSDM1 Filter 1 global Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + RNG_IRQn = 80, /*!< RNG global Interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + QUADSPI_IRQn = 92, /*!< QuadSPI global Interrupt */ + FMPI2C1_EV_IRQn = 95, /*!< FMPI2C1 Event Interrupt */ + FMPI2C1_ER_IRQn = 96 /*!< FMPI2C1 Error Interrupt */ +#endif /* STM32F412xG */ + +#if defined(STM32F413_423xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC1&2 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + DFSDM1_FLT0_IRQn = 61, /*!< DFSDM1 Filter 0 global Interrupt */ + DFSDM1_FLT1_IRQn = 62, /*!< DFSDM1 Filter 1 global Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + CAN3_TX_IRQn = 74, /*!< CAN3 TX Interrupt */ + CAN3_RX0_IRQn = 75, /*!< CAN3 RX0 Interrupt */ + CAN3_RX1_IRQn = 76, /*!< CAN3 RX1 Interrupt */ + CAN3_SCE_IRQn = 77, /*!< CAN3 SCE Interrupt */ + RNG_IRQn = 80, /*!< RNG global Interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SAI1_IRQn = 87, /*!< Serial Audio Interface 1 global interrupt */ + UART9_IRQn = 88, /*!< UART9 global Interrupt */ + UART10_IRQn = 89, /*!< UART10 global Interrupt */ + QUADSPI_IRQn = 92, /*!< QuadSPI global Interrupt */ + FMPI2C1_EV_IRQn = 95, /*!< FMPI2C1 Event Interrupt */ + FMPI2C1_ER_IRQn = 96, /*!< FMPI2C1 Error Interrupt */ + LPTIM1_IRQn = 97, /*!< LP TIM1 interrupt */ + DFSDM2_FLT0_IRQn = 98, /*!< DFSDM2 Filter 0 global Interrupt */ + DFSDM2_FLT1_IRQn = 99, /*!< DFSDM2 Filter 1 global Interrupt */ + DFSDM2_FLT2_IRQn = 100, /*!< DFSDM2 Filter 2 global Interrupt */ + DFSDM2_FLT3_IRQn = 101 /*!< DFSDM2 Filter 3 global Interrupt */ +#endif /* STM32F413_423xx */ } IRQn_Type; /** @@ -221,6 +822,53 @@ typedef enum #include "cmsis-system_stm32f4xx.h" #include +/** @addtogroup Exported_types + * @{ + */ +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/** + * @} + */ + /** @addtogroup Peripheral_registers_structures * @{ */ @@ -229,6 +877,7 @@ typedef enum * @brief Analog to Digital Converter */ + typedef struct { __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ @@ -245,7 +894,7 @@ typedef struct __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ - __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38 */ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ @@ -261,6 +910,86 @@ typedef struct AND triple modes, Address offset: ADC1 base address + 0x308 */ } ADC_Common_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +#if defined(STM32F446xx) +/** + * @brief Consumer Electronics Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; +#endif /* STM32F446xx */ + /** * @brief CRC calculation unit */ @@ -274,6 +1003,67 @@ typedef struct __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ } CRC_TypeDef; +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +#if defined(STM32F412xG) || defined(STM32F413_423xx) +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/* Legacy Defines */ +#define DFSDM_TypeDef DFSDM_Filter_TypeDef +#endif /* STM32F412xG || STM32F413_423xx */ /** * @brief Debug MCU */ @@ -286,6 +1076,24 @@ typedef struct __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ }DBGMCU_TypeDef; +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; /** * @brief DMA Controller @@ -309,6 +1117,193 @@ typedef struct __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ } DMA_TypeDef; +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + +#if defined(STM32F469_479xx) +/** + * @brief DSI Controller + */ + +typedef struct +{ + __IO uint32_t VR; /*!< DSI Host Version Register, Address offset: 0x00 */ + __IO uint32_t CR; /*!< DSI Host Control Register, Address offset: 0x04 */ + __IO uint32_t CCR; /*!< DSI HOST Clock Control Register, Address offset: 0x08 */ + __IO uint32_t LVCIDR; /*!< DSI Host LTDC VCID Register, Address offset: 0x0C */ + __IO uint32_t LCOLCR; /*!< DSI Host LTDC Color Coding Register, Address offset: 0x10 */ + __IO uint32_t LPCR; /*!< DSI Host LTDC Polarity Configuration Register, Address offset: 0x14 */ + __IO uint32_t LPMCR; /*!< DSI Host Low-Power Mode Configuration Register, Address offset: 0x18 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x1C - 0x2B */ + __IO uint32_t PCR; /*!< DSI Host Protocol Configuration Register, Address offset: 0x2C */ + __IO uint32_t GVCIDR; /*!< DSI Host Generic VCID Register, Address offset: 0x30 */ + __IO uint32_t MCR; /*!< DSI Host Mode Configuration Register, Address offset: 0x34 */ + __IO uint32_t VMCR; /*!< DSI Host Video Mode Configuration Register, Address offset: 0x38 */ + __IO uint32_t VPCR; /*!< DSI Host Video Packet Configuration Register, Address offset: 0x3C */ + __IO uint32_t VCCR; /*!< DSI Host Video Chunks Configuration Register, Address offset: 0x40 */ + __IO uint32_t VNPCR; /*!< DSI Host Video Null Packet Configuration Register, Address offset: 0x44 */ + __IO uint32_t VHSACR; /*!< DSI Host Video HSA Configuration Register, Address offset: 0x48 */ + __IO uint32_t VHBPCR; /*!< DSI Host Video HBP Configuration Register, Address offset: 0x4C */ + __IO uint32_t VLCR; /*!< DSI Host Video Line Configuration Register, Address offset: 0x50 */ + __IO uint32_t VVSACR; /*!< DSI Host Video VSA Configuration Register, Address offset: 0x54 */ + __IO uint32_t VVBPCR; /*!< DSI Host Video VBP Configuration Register, Address offset: 0x58 */ + __IO uint32_t VVFPCR; /*!< DSI Host Video VFP Configuration Register, Address offset: 0x5C */ + __IO uint32_t VVACR; /*!< DSI Host Video VA Configuration Register, Address offset: 0x60 */ + __IO uint32_t LCCR; /*!< DSI Host LTDC Command Configuration Register, Address offset: 0x64 */ + __IO uint32_t CMCR; /*!< DSI Host Command Mode Configuration Register, Address offset: 0x68 */ + __IO uint32_t GHCR; /*!< DSI Host Generic Header Configuration Register, Address offset: 0x6C */ + __IO uint32_t GPDR; /*!< DSI Host Generic Payload Data Register, Address offset: 0x70 */ + __IO uint32_t GPSR; /*!< DSI Host Generic Packet Status Register, Address offset: 0x74 */ + __IO uint32_t TCCR[6]; /*!< DSI Host Timeout Counter Configuration Register, Address offset: 0x78-0x8F */ + __IO uint32_t TDCR; /*!< DSI Host 3D Configuration Register, Address offset: 0x90 */ + __IO uint32_t CLCR; /*!< DSI Host Clock Lane Configuration Register, Address offset: 0x94 */ + __IO uint32_t CLTCR; /*!< DSI Host Clock Lane Timer Configuration Register, Address offset: 0x98 */ + __IO uint32_t DLTCR; /*!< DSI Host Data Lane Timer Configuration Register, Address offset: 0x9C */ + __IO uint32_t PCTLR; /*!< DSI Host PHY Control Register, Address offset: 0xA0 */ + __IO uint32_t PCONFR; /*!< DSI Host PHY Configuration Register, Address offset: 0xA4 */ + __IO uint32_t PUCR; /*!< DSI Host PHY ULPS Control Register, Address offset: 0xA8 */ + __IO uint32_t PTTCR; /*!< DSI Host PHY TX Triggers Configuration Register, Address offset: 0xAC */ + __IO uint32_t PSR; /*!< DSI Host PHY Status Register, Address offset: 0xB0 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0xB4 - 0xBB */ + __IO uint32_t ISR[2]; /*!< DSI Host Interrupt & Status Register, Address offset: 0xBC-0xC3 */ + __IO uint32_t IER[2]; /*!< DSI Host Interrupt Enable Register, Address offset: 0xC4-0xCB */ + uint32_t RESERVED2[3]; /*!< Reserved, 0xD0 - 0xD7 */ + __IO uint32_t FIR[2]; /*!< DSI Host Force Interrupt Register, Address offset: 0xD8-0xDF */ + uint32_t RESERVED3[8]; /*!< Reserved, 0xE0 - 0xFF */ + __IO uint32_t VSCR; /*!< DSI Host Video Shadow Control Register, Address offset: 0x100 */ + uint32_t RESERVED4[2]; /*!< Reserved, 0x104 - 0x10B */ + __IO uint32_t LCVCIDR; /*!< DSI Host LTDC Current VCID Register, Address offset: 0x10C */ + __IO uint32_t LCCCR; /*!< DSI Host LTDC Current Color Coding Register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, 0x114 */ + __IO uint32_t LPMCCR; /*!< DSI Host Low-power Mode Current Configuration Register, Address offset: 0x118 */ + uint32_t RESERVED6[7]; /*!< Reserved, 0x11C - 0x137 */ + __IO uint32_t VMCCR; /*!< DSI Host Video Mode Current Configuration Register, Address offset: 0x138 */ + __IO uint32_t VPCCR; /*!< DSI Host Video Packet Current Configuration Register, Address offset: 0x13C */ + __IO uint32_t VCCCR; /*!< DSI Host Video Chuncks Current Configuration Register, Address offset: 0x140 */ + __IO uint32_t VNPCCR; /*!< DSI Host Video Null Packet Current Configuration Register, Address offset: 0x144 */ + __IO uint32_t VHSACCR; /*!< DSI Host Video HSA Current Configuration Register, Address offset: 0x148 */ + __IO uint32_t VHBPCCR; /*!< DSI Host Video HBP Current Configuration Register, Address offset: 0x14C */ + __IO uint32_t VLCCR; /*!< DSI Host Video Line Current Configuration Register, Address offset: 0x150 */ + __IO uint32_t VVSACCR; /*!< DSI Host Video VSA Current Configuration Register, Address offset: 0x154 */ + __IO uint32_t VVBPCCR; /*!< DSI Host Video VBP Current Configuration Register, Address offset: 0x158 */ + __IO uint32_t VVFPCCR; /*!< DSI Host Video VFP Current Configuration Register, Address offset: 0x15C */ + __IO uint32_t VVACCR; /*!< DSI Host Video VA Current Configuration Register, Address offset: 0x160 */ + uint32_t RESERVED7[11]; /*!< Reserved, 0x164 - 0x18F */ + __IO uint32_t TDCCR; /*!< DSI Host 3D Current Configuration Register, Address offset: 0x190 */ + uint32_t RESERVED8[155]; /*!< Reserved, 0x194 - 0x3FF */ + __IO uint32_t WCFGR; /*!< DSI Wrapper Configuration Register, Address offset: 0x400 */ + __IO uint32_t WCR; /*!< DSI Wrapper Control Register, Address offset: 0x404 */ + __IO uint32_t WIER; /*!< DSI Wrapper Interrupt Enable Register, Address offset: 0x408 */ + __IO uint32_t WISR; /*!< DSI Wrapper Interrupt and Status Register, Address offset: 0x40C */ + __IO uint32_t WIFCR; /*!< DSI Wrapper Interrupt Flag Clear Register, Address offset: 0x410 */ + uint32_t RESERVED9; /*!< Reserved, 0x414 */ + __IO uint32_t WPCR[5]; /*!< DSI Wrapper PHY Configuration Register, Address offset: 0x418-0x42B */ + uint32_t RESERVED10; /*!< Reserved, 0x42C */ + __IO uint32_t WRPCR; /*!< DSI Wrapper Regulator and PLL Control Register, Address offset: 0x430 */ +} DSI_TypeDef; +#endif /* STM32F469_479xx */ + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; /** * @brief External Interrupt/Event Controller @@ -339,6 +1334,141 @@ typedef struct __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */ } FLASH_TypeDef; +#if defined(STM32F40_41xxx) || defined(STM32F412xG) || defined(STM32F413_423xx) +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ + __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ + __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ + __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ + __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ +} FSMC_Bank4_TypeDef; +#endif /* STM32F40_41xxx || STM32F412xG || STM32F413_423xx */ + +#if defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FMC_Bank2_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ + __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ + __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ + __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ + __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ +} FMC_Bank4_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; +#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx || STM32F469_479xx */ + /** * @brief General Purpose I/O */ @@ -351,7 +1481,7 @@ typedef struct __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint32_t BSRR; /*!< GPIO port bit set/reset register Address offset: 0x18 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ } GPIO_TypeDef; @@ -365,8 +1495,19 @@ typedef struct __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ +#if defined (STM32F410xx) || defined(STM32F412xG) || defined(STM32F413_423xx) + uint32_t RESERVED; /*!< Reserved, 0x18 */ + __IO uint32_t CFGR2; /*!< Reserved, 0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x24-0x28 */ + __IO uint32_t CFGR; /*!< SYSCFG Configuration register, Address offset: 0x2C */ +#else /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE || STM32F446xx || STM32F469_479xx */ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +#endif /* STM32F410xx || defined(STM32F412xG) || defined(STM32F413_423xx) */ +#if defined(STM32F413_423xx) + __IO uint32_t MCHDLYCR; /*!< SYSCFG multi-channel delay register, Address offset: 0x30 */ +#endif /* STM32F413_423xx */ } SYSCFG_TypeDef; /** @@ -375,18 +1516,49 @@ typedef struct typedef struct { - __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ - __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ - __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */ - __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ - __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ - __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ - __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ - __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */ + __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ + __IO uint16_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */ + uint16_t RESERVED9; /*!< Reserved, 0x26 */ } I2C_TypeDef; +#if defined(STM32F410xx) || defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< FMPI2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< FMPI2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< FMPI2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< FMPI2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< FMPI2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< FMPI2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< FMPI2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< FMPI2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< FMPI2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< FMPI2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< FMPI2C Transmit data register, Address offset: 0x28 */ +}FMPI2C_TypeDef; +#endif /* STM32F410xx || STM32F412xG || STM32F413_423xx || STM32F446xx */ + /** * @brief Independent WATCHDOG */ @@ -399,6 +1571,54 @@ typedef struct __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ } IWDG_TypeDef; +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + /** * @brief Power Control */ @@ -445,6 +1665,10 @@ typedef struct uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */ + __IO uint32_t CKGATENR; /*!< RCC Clocks Gated Enable Register, Address offset: 0x90 */ /* Only for STM32F412xG, STM32413_423xx and STM32F446xx devices */ + __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x94 */ /* Only for STM32F410xx, STM32F412xG, STM32413_423xx and STM32F446xx devices */ } RCC_TypeDef; @@ -497,6 +1721,27 @@ typedef struct } RTC_TypeDef; +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + /** * @brief SD host Interface */ @@ -531,44 +1776,128 @@ typedef struct typedef struct { - __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ - __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ - __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ - __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ - __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ - __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ - __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ - __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ - __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ + __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ } SPI_TypeDef; +#if defined(STM32F446xx) +/** + * @brief SPDIFRX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint16_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + uint16_t RESERVED0; /*!< Reserved, 0x06 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint16_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + uint16_t RESERVED1; /*!< Reserved, 0x0E */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ + uint16_t RESERVED2; /*!< Reserved, 0x1A */ +} SPDIFRX_TypeDef; +#endif /* STM32F446xx */ + +#if defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +/** + * @brief QUAD Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; +#endif /* STM32F412xG || STM32F413_423xx || STM32F446xx || STM32F469_479xx */ + +#if defined(STM32F446xx) +/** + * @brief SPDIF-RX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint16_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + uint16_t RESERVED0; /*!< Reserved, 0x06 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint16_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + uint16_t RESERVED1; /*!< Reserved, 0x0E */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ + uint16_t RESERVED2; /*!< Reserved, 0x1A */ +} SPDIF_TypeDef; +#endif /* STM32F446xx */ + /** * @brief TIM */ typedef struct { - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + uint16_t RESERVED9; /*!< Reserved, 0x2A */ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + uint16_t RESERVED10; /*!< Reserved, 0x32 */ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ - __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ + __IO uint16_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + uint16_t RESERVED11; /*!< Reserved, 0x46 */ + __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + uint16_t RESERVED12; /*!< Reserved, 0x4A */ + __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + uint16_t RESERVED13; /*!< Reserved, 0x4E */ + __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */ + uint16_t RESERVED14; /*!< Reserved, 0x52 */ } TIM_TypeDef; /** @@ -597,143 +1926,153 @@ typedef struct __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ } WWDG_TypeDef; +/** + * @brief Crypto Processor + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ + __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ + __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ + __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ + __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ + __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ + __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ + __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ + __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ + __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ + __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ + __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ + __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ + __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ + __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ + __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ +} CRYP_TypeDef; /** - * @brief __USB_OTG_Core_register + * @brief HASH + */ + +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[54]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1CC */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ + +typedef struct +{ + __IO uint32_t HR[8]; /*!< HASH digest registers, Address offset: 0x310-0x32C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +#if defined(STM32F410xx) || defined(STM32F413_423xx) +/** + * @brief LPTIMER */ typedef struct { - __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */ - __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */ - __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */ - __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */ - __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */ - __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */ - __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */ - __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */ - __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */ - __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */ - __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */ - uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */ - __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */ - __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */ - uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */ - __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */ - __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ -} -USB_OTG_GlobalTypeDef; - - - + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; +#endif /* STM32F410xx || STM32F413_423xx */ /** - * @brief __device_Registers + * @} */ -typedef struct -{ - __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */ - __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */ - __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */ - uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */ - __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */ - __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */ - __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */ - __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */ - uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */ - uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */ - __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */ - __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */ - __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */ - __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */ - __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */ - uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */ - __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */ - uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */ - __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */ -} -USB_OTG_DeviceTypeDef; - -/** - * @brief __IN_Endpoint-Specific_Register +/** @addtogroup Peripheral_memory_map + * @{ */ -typedef struct -{ - __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ - uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */ - __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ - uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */ - __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ - __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ - __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ - uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ -} -USB_OTG_INEndpointTypeDef; - -/** - * @brief __OUT_Endpoint-Specific_Registers - */ -typedef struct -{ - __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ - __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ - __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ - uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ -} -USB_OTG_OUTEndpointTypeDef; - - -/** - * @brief __Host_Mode_Register_Structures - */ -typedef struct -{ - __IO uint32_t HCFG; /* Host Configuration Register 400h*/ - __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ - __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ - uint32_t Reserved40C; /* Reserved 40Ch*/ - __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ - __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ - __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ -} -USB_OTG_HostTypeDef; - - -/** - * @brief __Host_Channel_Specific_Registers - */ -typedef struct -{ - __IO uint32_t HCCHAR; - __IO uint32_t HCSPLT; - __IO uint32_t HCINT; - __IO uint32_t HCINTMSK; - __IO uint32_t HCTSIZ; - __IO uint32_t HCDMA; - uint32_t Reserved[2]; -} -USB_OTG_HostChannelTypeDef; - - -/** - * @brief Peripheral_memory_map - */ #define FLASH_BASE (0x08000000UL) /*!< FLASH(up to 1 MB) base address in the alias region */ #define CCMDATARAM_BASE (0x10000000UL) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */ #define SRAM1_BASE (0x20000000UL) /*!< SRAM1(112 KB) base address in the alias region */ +#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) #define SRAM2_BASE (0x2001C000UL) /*!< SRAM2(16 KB) base address in the alias region */ +#define SRAM3_BASE (0x20020000UL) /*!< SRAM3(64 KB) base address in the alias region */ +#elif defined(STM32F469_479xx) +#define SRAM2_BASE (0x20028000UL) /*!< SRAM2(16 KB) base address in the alias region */ +#define SRAM3_BASE (0x20030000UL) /*!< SRAM3(64 KB) base address in the alias region */ +#elif defined(STM32F413_423xx) +#define SRAM2_BASE (0x20040000UL) /*!< SRAM2(16 KB) base address in the alias region */ +#else /* STM32F411xE || STM32F410xx || STM32F412xG */ +#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F446xx */ #define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address in the alias region */ #define BKPSRAM_BASE (0x40024000UL) /*!< Backup SRAM(4 KB) base address in the alias region */ + +#if defined(STM32F40_41xxx) || defined(STM32F412xG) || defined(STM32F413_423xx) +#define FSMC_R_BASE (0xA0000000UL) /*!< FSMC registers base address */ +#endif /* STM32F40_41xxx || STM32F412xG || STM32F413_423xx */ + +#if defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +#define FMC_R_BASE (0xA0000000UL) /*!< FMC registers base address */ +#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx || STM32F469_479xx */ + +#if defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +#define QSPI_R_BASE (0xA0001000UL) /*!< QuadSPI registers base address */ +#endif /* STM32F412xG || STM32F413_423xx || STM32F446xx || STM32F469_479xx */ + +#define CCMDATARAM_BB_BASE (0x12000000UL) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */ #define SRAM1_BB_BASE (0x22000000UL) /*!< SRAM1(112 KB) base address in the bit-band region */ +#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) #define SRAM2_BB_BASE (0x22380000UL) /*!< SRAM2(16 KB) base address in the bit-band region */ +#define SRAM3_BB_BASE (0x22400000UL) /*!< SRAM3(64 KB) base address in the bit-band region */ +#elif defined(STM32F469_479xx) +#define SRAM2_BB_BASE (0x22500000UL) /*!< SRAM2(16 KB) base address in the bit-band region */ +#define SRAM3_BB_BASE (0x22600000UL) /*!< SRAM3(64 KB) base address in the bit-band region */ +#elif defined(STM32F413_423xx) +#define SRAM2_BB_BASE (0x22800000UL) /*!< SRAM2(64 KB) base address in the bit-band region */ +#else /* STM32F411xE || STM32F410xx || STM32F412xG */ +#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F446xx */ #define PERIPH_BB_BASE (0x42000000UL) /*!< Peripheral base address in the bit-band region */ #define BKPSRAM_BB_BASE (0x42480000UL) /*!< Backup SRAM(4 KB) base address in the bit-band region */ -#define FLASH_END (0x0807FFFFUL) /*!< FLASH end address */ /* Legacy defines */ #define SRAM_BASE SRAM1_BASE @@ -751,24 +2090,57 @@ USB_OTG_HostChannelTypeDef; #define TIM3_BASE (APB1PERIPH_BASE + 0x0400) #define TIM4_BASE (APB1PERIPH_BASE + 0x0800) #define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#if defined(STM32F410xx) || defined(STM32F413_423xx) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400) +#endif /* STM32F410xx || STM32F413_423xx */ +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) #define RTC_BASE (APB1PERIPH_BASE + 0x2800) #define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) #define IWDG_BASE (APB1PERIPH_BASE + 0x3000) #define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400) #define SPI2_BASE (APB1PERIPH_BASE + 0x3800) #define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#if defined(STM32F446xx) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000) +#endif /* STM32F446xx */ #define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000) #define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) #define I2C1_BASE (APB1PERIPH_BASE + 0x5400) #define I2C2_BASE (APB1PERIPH_BASE + 0x5800) #define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#if defined(STM32F410xx) || defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) +#define FMPI2C1_BASE (APB1PERIPH_BASE + 0x6000) +#endif /* STM32F410xx || STM32F412xG || STM32F413_423xx || STM32F446xx */ +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#if defined(STM32F413_423xx) +#define CAN3_BASE (APB1PERIPH_BASE + 0x6C00) +#endif /* STM32F413_423xx */ +#if defined(STM32F446xx) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00) +#endif /* STM32F446xx */ #define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) /*!< APB2 peripherals */ #define TIM1_BASE (APB2PERIPH_BASE + 0x0000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400) #define USART1_BASE (APB2PERIPH_BASE + 0x1000) #define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define UART9_BASE (APB2PERIPH_BASE + 0x1800U) +#define UART10_BASE (APB2PERIPH_BASE + 0x1C00U) #define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) #define ADC_BASE (APB2PERIPH_BASE + 0x2300) #define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) #define SPI1_BASE (APB2PERIPH_BASE + 0x3000) @@ -779,6 +2151,54 @@ USB_OTG_HostChannelTypeDef; #define TIM10_BASE (APB2PERIPH_BASE + 0x4400) #define TIM11_BASE (APB2PERIPH_BASE + 0x4800) #define SPI5_BASE (APB2PERIPH_BASE + 0x5000) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) +#if defined(STM32F446xx) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024) +#endif /* STM32F446xx */ +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104) +#if defined(STM32F469_479xx) +#define DSI_BASE (APB2PERIPH_BASE + 0x6C00) +#endif /* STM32F469_479xx */ +#if defined(STM32F412xG) || defined(STM32F413_423xx) +#define DFSDM1_BASE (APB2PERIPH_BASE + 0x6000) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180) +#define DFSDM1_0 ((DFSDM_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_1 ((DFSDM_TypeDef *) DFSDM1_Filter1_BASE) +/* Legacy Defines */ +#define DFSDM0 DFSDM1_0 +#define DFSDM1 DFSDM1_1 +#if defined(STM32F413_423xx) +#define DFSDM2_BASE (APB2PERIPH_BASE + 0x6400U) +#define DFSDM2_Channel0_BASE (DFSDM2_BASE + 0x00U) +#define DFSDM2_Channel1_BASE (DFSDM2_BASE + 0x20U) +#define DFSDM2_Channel2_BASE (DFSDM2_BASE + 0x40U) +#define DFSDM2_Channel3_BASE (DFSDM2_BASE + 0x60U) +#define DFSDM2_Channel4_BASE (DFSDM2_BASE + 0x80U) +#define DFSDM2_Channel5_BASE (DFSDM2_BASE + 0xA0U) +#define DFSDM2_Channel6_BASE (DFSDM2_BASE + 0xC0U) +#define DFSDM2_Channel7_BASE (DFSDM2_BASE + 0xE0U) +#define DFSDM2_Filter0_BASE (DFSDM2_BASE + 0x100U) +#define DFSDM2_Filter1_BASE (DFSDM2_BASE + 0x180U) +#define DFSDM2_Filter2_BASE (DFSDM2_BASE + 0x200U) +#define DFSDM2_Filter3_BASE (DFSDM2_BASE + 0x280U) +#define DFSDM2_0 ((DFSDM_TypeDef *) DFSDM2_Filter0_BASE) +#define DFSDM2_1 ((DFSDM_TypeDef *) DFSDM2_Filter1_BASE) +#define DFSDM2_2 ((DFSDM_TypeDef *) DFSDM2_Filter2_BASE) +#define DFSDM2_3 ((DFSDM_TypeDef *) DFSDM2_Filter3_BASE) +#endif /* STM32F413_423xx */ +#endif /* STM32F412xG || STM32F413_423xx */ /*!< AHB1 peripherals */ #define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) @@ -786,7 +2206,12 @@ USB_OTG_HostChannelTypeDef; #define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800) #define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00) #define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) #define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800) #define CRC_BASE (AHB1PERIPH_BASE + 0x3000) #define RCC_BASE (AHB1PERIPH_BASE + 0x3800) #define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) @@ -808,25 +2233,41 @@ USB_OTG_HostChannelTypeDef; #define DMA2_Stream5_BASE (DMA2_BASE + 0x088) #define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0) #define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000) + +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) +#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000) +#define HASH_BASE (AHB2PERIPH_BASE + 0x60400) +#define HASH_DIGEST_BASE (AHB2PERIPH_BASE + 0x60710) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800) + +#if defined(STM32F40_41xxx) || defined(STM32F412xG) || defined(STM32F413_423xx) +/*!< FSMC Bankx registers base address */ +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) +#endif /* STM32F40_41xxx || STM32F412xG || STM32F413_423xx */ + +#if defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) +#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) +#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) +#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx || STM32F469_479xx */ /* Debug MCU registers base address */ -#define DBGMCU_BASE (0xE0042000UL) - -/*!< USB registers base address */ -#define USB_OTG_FS_PERIPH_BASE (0x50000000UL) - -#define USB_OTG_GLOBAL_BASE (0x000UL) -#define USB_OTG_DEVICE_BASE (0x800UL) -#define USB_OTG_IN_ENDPOINT_BASE (0x900UL) -#define USB_OTG_OUT_ENDPOINT_BASE (0xB00UL) -#define USB_OTG_EP_REG_SIZE (0x20UL) -#define USB_OTG_HOST_BASE (0x400UL) -#define USB_OTG_HOST_PORT_BASE (0x440UL) -#define USB_OTG_HOST_CHANNEL_BASE (0x500UL) -#define USB_OTG_HOST_CHANNEL_SIZE (0x20UL) -#define USB_OTG_PCGCCTL_BASE (0xE00UL) -#define USB_OTG_FIFO_BASE (0x1000UL) -#define USB_OTG_FIFO_SIZE (0x1000UL) +#define DBGMCU_BASE ((uint32_t )0xE0042000) /** * @} @@ -835,27 +2276,63 @@ USB_OTG_HostChannelTypeDef; /** @addtogroup Peripheral_declaration * @{ */ +#if defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#endif /* STM32F412xG || STM32F413_423xx || STM32F446xx || STM32F469_479xx */ #define TIM2 ((TIM_TypeDef *) TIM2_BASE) #define TIM3 ((TIM_TypeDef *) TIM3_BASE) #define TIM4 ((TIM_TypeDef *) TIM4_BASE) #define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) #define RTC ((RTC_TypeDef *) RTC_BASE) #define WWDG ((WWDG_TypeDef *) WWDG_BASE) #define IWDG ((IWDG_TypeDef *) IWDG_BASE) #define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE) #define SPI2 ((SPI_TypeDef *) SPI2_BASE) #define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#if defined(STM32F446xx) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#endif /* STM32F446xx */ #define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE) #define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) #define I2C1 ((I2C_TypeDef *) I2C1_BASE) #define I2C2 ((I2C_TypeDef *) I2C2_BASE) #define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#if defined(STM32F410xx) || defined(STM32F412xG) || defined(STM32F413_423xx) || defined(STM32F446xx) +#define FMPI2C1 ((FMPI2C_TypeDef *) FMPI2C1_BASE) +#endif /* STM32F410xx || STM32F412xG || STM32F413_423xx || STM32F446xx */ +#if defined(STM32F410xx) || defined(STM32F413_423xx) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#endif /* STM32F410xx || STM32F413_423xx */ +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#if defined(STM32F413_423xx) +#define CAN3 ((CAN_TypeDef *) CAN3_BASE) +#endif /* STM32F413_423xx */ +#if defined(STM32F446xx) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#endif /* STM32F446xx */ #define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UART9 ((USART_TypeDef *) UART9_BASE) +#define UART10 ((USART_TypeDef *) UART10_BASE) #define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) #define USART1 ((USART_TypeDef *) USART1_BASE) #define USART6 ((USART_TypeDef *) USART6_BASE) #define ADC ((ADC_Common_TypeDef *) ADC_BASE) #define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) #define SDIO ((SDIO_TypeDef *) SDIO_BASE) #define SPI1 ((SPI_TypeDef *) SPI1_BASE) #define SPI4 ((SPI_TypeDef *) SPI4_BASE) @@ -865,12 +2342,54 @@ USB_OTG_HostChannelTypeDef; #define TIM10 ((TIM_TypeDef *) TIM10_BASE) #define TIM11 ((TIM_TypeDef *) TIM11_BASE) #define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#if defined(STM32F446xx) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#endif /* STM32F446xx */ +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#if defined(STM32F469_479xx) +#define DSI ((DSI_TypeDef *)DSI_BASE) +#endif /* STM32F469_479xx */ +#if defined(STM32F412xG) || defined(STM32F413_423xx) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Filter0 ((DFSDM_TypeDef *) DFSDM_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_TypeDef *) DFSDM_Filter1_BASE) +#if defined(STM32F413_423xx) +#define DFSDM2_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel0_BASE) +#define DFSDM2_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel1_BASE) +#define DFSDM2_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel2_BASE) +#define DFSDM2_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel3_BASE) +#define DFSDM2_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel4_BASE) +#define DFSDM2_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel5_BASE) +#define DFSDM2_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel6_BASE) +#define DFSDM2_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel7_BASE) +#define DFSDM2_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM2_Filter0_BASE) +#define DFSDM2_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM2_Filter1_BASE) +#define DFSDM2_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM2_Filter2_BASE) +#define DFSDM2_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM2_Filter3_BASE) +#endif /* STM32F413_423xx */ +#endif /* STM32F412xG || STM32F413_423xx */ #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) #define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) #define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) #define CRC ((CRC_TypeDef *) CRC_BASE) #define RCC ((RCC_TypeDef *) RCC_BASE) #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) @@ -892,11 +2411,33 @@ USB_OTG_HostChannelTypeDef; #define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) #define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) #define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define CRYP ((CRYP_TypeDef *) CRYP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + +#if defined(STM32F40_41xxx) || defined(STM32F412xG) || defined(STM32F413_423xx) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#endif /* STM32F40_41xxx || STM32F412xG || STM32F413_423xx */ + +#if defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx) || defined(STM32F469_479xx) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank2 ((FMC_Bank2_TypeDef *) FMC_Bank2_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank4 ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx || STM32F469_479xx */ #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) -#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) - /** * @} */ @@ -919,12 +2460,12 @@ USB_OTG_HostChannelTypeDef; /* */ /******************************************************************************/ /******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD (0x00000001UL) /*!flash + + .data : ALIGN(16) { + __data_beg__ = .; /* Used in crt0.S */ + *(.data*) /* Initialized data */ + __data_end__ = .; /* Used in crt0.S */ + } >ram AT > flash + + .bss (NOLOAD) : ALIGN(16) { + __bss_beg__ = .; /* Used in crt0.S */ + *(.bss*) /* Uninitialized data */ + *(COMMON) /* Common data */ + __bss_end__ = .; /* Used in crt0.S */ + } >ram + +/* C++ exception unwinding stuff--needed by some toolchains */ + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >flash + + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >flash + __exidx_end = .; +} + +/* Firmware entry point */ + +ENTRY(_vectors) diff --git a/cmsis-system_stm32f4xx.c b/cmsis-system_stm32f4xx.c index 15951e4..6d5d0c8 100644 --- a/cmsis-system_stm32f4xx.c +++ b/cmsis-system_stm32f4xx.c @@ -282,27 +282,56 @@ void SetSysClock(void) // PLLP: PLLCLK = 96 MHz (384 MHz / 4) // PLLQ: USB clock = 48 MHz (384 MHz / 8) --> 48MHz is best choice for USB #if __SYSTEM_CLOCK == 96000000 + #if !defined(STM32F411xE) && !defined(STM32F446xx) + #warning You are running the controller out of specification! 96 MHz! + #endif #define PLLM 4 #define PLLN 192 #define PLLP 4 #define PLLQ 8 + #define LATENCY FLASH_ACR_LATENCY_3WS #elif __SYSTEM_CLOCK == 100000000 + #if !defined(STM32F411xE) && !defined(STM32F446xx) + #warning You are running the controller out of specification! 100 MHz! + #endif #define PLLM 4 #define PLLN 200 #define PLLP 4 #define PLLQ 8 + #define LATENCY FLASH_ACR_LATENCY_3WS #elif __SYSTEM_CLOCK == 108000000 - #warning You are running the controller out of specification! + #if !defined(STM32F446xx) + #warning You are running the controller out of specification! 108 MHz! + #endif #define PLLM 4 #define PLLN 216 #define PLLP 4 #define PLLQ 9 + #define LATENCY FLASH_ACR_LATENCY_3WS #elif __SYSTEM_CLOCK == 125000000 - #warning You are running the controller out of specification! + #if !defined(STM32F446xx) + #warning You are running the controller out of specification! 125 MHz! + #endif #define PLLM 4 #define PLLN 250 #define PLLP 4 #define PLLQ 10 + #define LATENCY FLASH_ACR_LATENCY_4WS + #elif __SYSTEM_CLOCK == 84000000 + #define PLLM 4 + #define PLLN 168 + #define PLLP 4 + #define PLLQ 7 + #define LATENCY FLASH_ACR_LATENCY_2WS + #elif __SYSTEM_CLOCK == 180000000 + #if !defined(STM32F446xx) + #warning You are running the controller out of specification! 180 MHz! + #endif + #define PLLM 4 + #define PLLN 180 + #define PLLP 2 + #define PLLQ 8 + #define LATENCY FLASH_ACR_LATENCY_5WS #endif RCC->PLLCFGR = RCC_PLLCFGR_PLLSRC_HSE | @@ -320,11 +349,11 @@ void SetSysClock(void) (HCLK) and the supply voltage of the device. */ /* Increasing the CPU frequency */ - if(FLASH_ACR_LATENCY_3WS > (FLASH->ACR & FLASH_ACR_LATENCY)) + if(LATENCY > (FLASH->ACR & FLASH_ACR_LATENCY)) { /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ FLASH->ACR &= ~(FLASH_ACR_LATENCY); - FLASH->ACR |= FLASH_ACR_LATENCY_3WS; + FLASH->ACR |= LATENCY; RCC->CFGR &= ~(RCC_CFGR_HPRE | RCC_CFGR_SW); RCC->CFGR |= RCC_CFGR_HPRE_DIV1 | RCC_CFGR_SW_PLL; @@ -337,7 +366,7 @@ void SetSysClock(void) /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ FLASH->ACR &= ~(FLASH_ACR_LATENCY); - FLASH->ACR |= FLASH_ACR_LATENCY_3WS; + FLASH->ACR |= LATENCY; } RCC->CFGR &= ~(RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2); diff --git a/cmsis-system_stm32f4xx.h b/cmsis-system_stm32f4xx.h index c57ef09..7ce78f8 100644 --- a/cmsis-system_stm32f4xx.h +++ b/cmsis-system_stm32f4xx.h @@ -56,7 +56,7 @@ #endif // #define __SYSTEM_CLOCK 96000000 -#define __SYSTEM_CLOCK 100000000 +// #define __SYSTEM_CLOCK 100000000 // #define __SYSTEM_CLOCK 108000000 // Overclocking is not recommended! /*