josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Tidy up config.h.dist a bit.

This commit is contained in:
Markus Hitter 2010-10-07 20:44:20 +02:00
parent 4bddf3452f
commit da5194a54e
1 changed files with 34 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
config.h.dist
View File

@ -1,11 +1,15 @@
#ifndef _CONFIG_H #ifndef _CONFIG_H
#define _CONFIG_H #define _CONFIG_H
// -------------------------------------------------------------------------- /*
// values reflecting the gearing of your machine Values reflecting the gearing of your machine.
// all numbers are integers, so no decimals, please :-) All numbers are integers, so no decimals, please :-)
*/
// calculate these values appropriate for your machine // calculate these values appropriate for your machine
// for threaded rods, this is (steps motor per turn) / (pitch of the thread)
// for belts, this is (steps per motor turn) / (number of gear teeth) / (belt module)
// half-stepping doubles the number, quarter stepping requires * 4, etc.
#define STEPS_PER_MM_X 320 #define STEPS_PER_MM_X 320
#define STEPS_PER_MM_Y 320 #define STEPS_PER_MM_Y 320
#define STEPS_PER_MM_Z 320 #define STEPS_PER_MM_Z 320
@ -13,20 +17,18 @@
// http://blog.arcol.hu/?p=157 may help with this next one // http://blog.arcol.hu/?p=157 may help with this next one
#define STEPS_PER_MM_E 320 #define STEPS_PER_MM_E 320
// this is how many steps to suck back the filament by when we stop /*
#define E_STARTSTOP_STEPS 20 Values depending on the capabilities of your stepper motors and other mechanics.
All numbers are integers, no decimals allowed.
// -------------------------------------------------------------------------- */
// values depending on the capabilities of your stepper motors and other mechanics
// again, all numbers are integers
// used for G0 rapid moves and as a cap for all other feedrates // used for G0 rapid moves and as a cap for all other feedrates
#define MAXIMUM_FEEDRATE_X 200 #define MAXIMUM_FEEDRATE_X 200
#define MAXIMUM_FEEDRATE_Y 200 #define MAXIMUM_FEEDRATE_Y 200
#define MAXIMUM_FEEDRATE_Z 200 #define MAXIMUM_FEEDRATE_Z 100
#define MAXIMUM_FEEDRATE_E 200 #define MAXIMUM_FEEDRATE_E 200
// used when searching endstops and similar // used when searching endstops and as default feedrate
#define SEARCH_FEEDRATE_X 50 #define SEARCH_FEEDRATE_X 50
#define SEARCH_FEEDRATE_Y 50 #define SEARCH_FEEDRATE_Y 50
#define SEARCH_FEEDRATE_Z 50 #define SEARCH_FEEDRATE_Z 50
@ -36,6 +38,9 @@
#define TEMP_HYSTERESIS 20 #define TEMP_HYSTERESIS 20
#define TEMP_RESIDENCY_TIME 60 #define TEMP_RESIDENCY_TIME 60
// this is how many steps to suck back the filament by when we stop
#define E_STARTSTOP_STEPS 20
/* /*
acceleration, reprap style. acceleration, reprap style.
Each movement starts at the speed of the previous command and accelerates or decelerates linearly to reach target speed at the end of the movement. Each movement starts at the speed of the previous command and accelerates or decelerates linearly to reach target speed at the end of the movement.
@ -71,7 +76,7 @@
#define ANALOG_MASK MASK(TEMP_PIN_CHANNEL) #define ANALOG_MASK MASK(TEMP_PIN_CHANNEL)
/* /*
firmware build options Firmware build options
*/ */
// this option makes the step interrupt interruptible. // this option makes the step interrupt interruptible.
@ -110,6 +115,10 @@ firmware build options
/* /*
Machine Pin Definitions Machine Pin Definitions
- make sure to avoid duplicate usage of a pin
- comment out pins not in use, as this drops the corresponding code and makes operations faster
*/ */
#include "arduino.h" #include "arduino.h"