josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

use constants for conditional compilation since preprocessor can't work out enums and we can't define in macros

This commit is contained in:
Michael Moon 2011-02-06 21:34:44 +11:00
parent 1c723f7656
commit e4fc55289b
4 changed files with 69 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
config.h.dist
View File

@ -30,11 +30,6 @@
#define F_CPU 16000000L
#endif
/*
Are you using the official GEN3 motherboard with separate extruder controller?
*/
#define GEN3
/*
This is the motherboard, as opposed to the extruder. See extruder/ directory for GEN3 extruder firmware
*/
@ -141,7 +136,6 @@
#include "arduino.h"
#ifndef GEN3
/*
user defined pins
adjust to suit your electronics,
@ -164,37 +158,36 @@
#define E_DIR_PIN DIO8
#define PS_ON_PIN DIO9
#else
/*
this is the official gen3 reprap motherboard pinout
*/
#define TX_ENABLE_PIN DIO12
#define RX_ENABLE_PIN DIO13
#define X_STEP_PIN DIO15
#define X_DIR_PIN DIO18
#define X_MIN_PIN DIO20
#define X_MAX_PIN DIO21
#define X_ENABLE_PIN DIO19
#define Y_STEP_PIN DIO23
#define Y_DIR_PIN DIO22
#define Y_MIN_PIN AIO6
#define Y_MAX_PIN AIO5
#define Y_ENABLE_PIN DIO7
#define Z_STEP_PIN AIO4
#define Z_DIR_PIN AIO3
#define Z_MIN_PIN AIO1
#define Z_MAX_PIN AIO0
#define Z_ENABLE_PIN AIO2
#define E_STEP_PIN DIO16
#define E_DIR_PIN DIO17
#define SD_CARD_DETECT DIO2
#define SD_WRITE_PROTECT DIO3
#endif
// #define TX_ENABLE_PIN DIO12
// #define RX_ENABLE_PIN DIO13
//
// #define X_STEP_PIN DIO15
// #define X_DIR_PIN DIO18
// #define X_MIN_PIN DIO20
// #define X_MAX_PIN DIO21
// #define X_ENABLE_PIN DIO19
//
// #define Y_STEP_PIN DIO23
// #define Y_DIR_PIN DIO22
// #define Y_MIN_PIN AIO6
// #define Y_MAX_PIN AIO5
// #define Y_ENABLE_PIN DIO7
//
// #define Z_STEP_PIN AIO4
// #define Z_DIR_PIN AIO3
// #define Z_MIN_PIN AIO1
// #define Z_MAX_PIN AIO0
// #define Z_ENABLE_PIN AIO2
//
// #define E_STEP_PIN DIO16
// #define E_DIR_PIN DIO17
//
// #define SD_CARD_DETECT DIO2
// #define SD_WRITE_PROTECT DIO3
@ -217,16 +210,13 @@
// which temperature sensors are you using? (intercom is the gen3-style separate extruder board)
// #define TEMP_MAX6675
// #define TEMP_THERMISTOR
#define TEMP_THERMISTOR
// #define TEMP_AD595
// #define TEMP_PT100
#define TEMP_INTERCOM
// #define TEMP_INTERCOM
// if you selected thermistor or AD595, what pin is it on? (this value only used to fill ANALOG_MASK for you)
#define TEMP_PIN_CHANNEL AIO0_PIN
// ANALOG_MASK is a bitmask of all analog channels used- if you use more than one analog input (more than one temp sensor?), bitwise-or them all together
#define ANALOG_MASK MASK(TEMP_PIN_CHANNEL)
// ANALOG_MASK is a bitmask of all analog channels used- bitwise-or them all together
#define ANALOG_MASK MASK(AIO0_PIN)
/***************************************************************************\
* *
@ -283,6 +273,12 @@ DEFINE_TEMP_SENSOR(extruder, TT_INTERCOM, 0)
DEFINE_HEATER(extruder, PORTD, PIND6, OCR0A)
DEFINE_HEATER(bed, PORTD, PIND5, OCR0B)
// and now because the c preprocessor isn't as smart as it could be,
// uncomment the ones you've listed above and comment the rest
#define HEATER_EXTRUDER HEATER_extruder
#define HEATER_BED HEATER_bed
// #define HEATER_FAN HEATER_fan
/***************************************************************************\
* *

12
gcode_process.c
View File

@ -275,15 +275,15 @@ void process_gcode_command() {
// M7/M106- fan on
case 7:
case 106:
#ifdef HEATER_fan
heater_set(HEATER_fan, 255);
#ifdef HEATER_FAN
heater_set(HEATER_FAN, 255);
#endif
break;
// M107- fan off
case 9:
case 107:
#ifdef HEATER_fan
heater_set(HEATER_fan, 0);
#ifdef HEATER_FAN
heater_set(HEATER_FAN, 0);
#endif
break;
@ -359,8 +359,8 @@ void process_gcode_command() {
break;
case 140: //Set heated bed temperature
#ifdef HEATER_bed
temp_set(HEATER_bed, next_target.S);
#ifdef HEATER_BED
temp_set(HEATER_BED, next_target.S);
if (next_target.S)
power_on();
#endif

4
intercom.c
View File

@ -5,7 +5,7 @@
#include "config.h"
#include "delay.h"
#ifdef GEN3
#ifdef TEMP_INTERCOM
#define INTERCOM_BAUD 57600
#define enable_transmit() do { WRITE(TX_ENABLE_PIN,1); WRITE(RX_ENABLE_PIN,0); } while(0)
@ -216,4 +216,4 @@ ISR(USART_UDRE_vect)
}
}
#endif /* GEN3 */
#endif /* TEMP_INTERCOM */

11
temp.c
View File

@ -11,7 +11,7 @@
#include "sersendf.h"
#endif
#include "heater.h"
#ifdef GEN3
#ifdef TEMP_INTERCOM
#include "intercom.h"
#endif
@ -112,7 +112,7 @@ void temp_init() {
break;*/
#endif
#ifdef GEN3
#ifdef TEMP_INTERCOM
case TT_INTERCOM:
intercom_init();
update_send_cmd(0);
@ -284,7 +284,7 @@ void temp_set(temp_sensor_t index, uint16_t temperature) {
temp_sensors_runtime[index].target_temp = temperature;
temp_sensors_runtime[index].temp_residency = 0;
#ifdef GEN3
#ifdef TEMP_INTERCOM
if (temp_sensors[index].temp_type == TT_INTERCOM)
update_send_cmd(temperature >> 2);
#endif
@ -308,10 +308,9 @@ void temp_print(temp_sensor_t index) {
c = (temp_sensors_runtime[index].last_read_temp & 3) * 25;
sersendf_P(PSTR("T:%u.%u"), temp_sensors_runtime[index].last_read_temp >> 2, c);
#ifdef _HEATER_bed
#warning heated bed enabled!
#ifdef HEATER_BED
uint8_t b = 0;
b = (temp_sensors_runtime[HEATER_bed].last_read_temp & 3) * 25;
b = (temp_sensors_runtime[HEATER_BED].last_read_temp & 3) * 25;
sersendf_P(PSTR(" B:%u.%u"), temp_sensors_runtime[HEATER_bed].last_read_temp >> 2 , b);
#endif