josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Temp: faster cycles in continuous mode. 

Thermistors and AD595 can be faster in that mode.

The new stategy is:

  1. read the value
  2. start the adc
  3. return the result
  - next cycle

instead of:

  1. start the adc
  - wait 10ms
  2. read the value
  3. return the result
  - next cycle

Review changes by Traumflug: fixed the warnings appearing in some
configurations (case NEEDS_START_ADC undefined and case
NEEDS_START_ADC defined, but TEMP_READ_CONTINUOUS == 0)
This commit is contained in:
Wurstnase 2016-05-20 08:22:33 +02:00 committed by Markus Hitter
parent 66f06d20a2
commit efb781bed5
1 changed files with 31 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
temp.c
View File

@ -268,17 +268,31 @@ static uint16_t temp_read_max6675(temp_sensor_t i) {
#ifdef TEMP_THERMISTOR
static uint16_t temp_read_thermistor(temp_sensor_t i) {
// Needs to be 'static', else GCC diagnostics emits a warning "'result' may
// be used uninitialized". No surprise about this warning, it's part of the
// logic that in some configurations temp_sensors_runtime[i].active never
// reaches more than 1.
static uint16_t result;
switch (temp_sensors_runtime[i].active++) {
case 1: // Start ADC conversion.
#ifdef NEEDS_START_ADC
#if TEMP_READ_CONTINUOUS
result = analog_read(i);
#endif
start_adc();
#if ! TEMP_READ_CONTINUOUS
return TEMP_NOT_READY;
#endif
// else fall through to conversion
#endif
// If not in continuous mode or no need for start_adc() fall through.
case 2: // Convert temperature values.
#if ! defined NEEDS_START_ADC || ! TEMP_READ_CONTINUOUS
result = analog_read(i);
#endif
temp_sensors_runtime[i].active = 0;
return temp_table_lookup(analog_read(i), i);
return temp_table_lookup(result, i);
}
return TEMP_NOT_READY;
}
@ -326,19 +340,30 @@ static uint16_t temp_read_mcp3008(temp_sensor_t i) {
#ifdef TEMP_AD595
static uint16_t temp_read_ad595(temp_sensor_t i) {
// Needs to be 'static', see comment in temp_read_thermistor().
static uint16_t result;
switch (temp_sensors_runtime[i].active++) {
case 1: // Start ADC conversion.
#ifdef NEEDS_START_ADC
#if TEMP_READ_CONTINUOUS
result = analog_read(i);
#endif
start_adc();
#if ! TEMP_READ_CONTINUOUS
return TEMP_NOT_READY;
#endif
// else fall through to conversion
#endif
// If not in continuous mode or no need for start_adc() fall through.
case 2: // Convert temperature values.
#if ! TEMP_READ_CONTINUOUS
result = analog_read(i);
#endif
temp_sensors_runtime[i].active = 0;
// Convert >> 8 instead of >> 10 because internal temp is stored as
// 14.2 fixed point.
return (analog_read(i) * 500L) >> 8;
return (result * 500L) >> 8;
}
return TEMP_NOT_READY;
}