129bdc64bc
home.c: introduce SLOW_HOMING
2011-10-23 19:51:48 +02:00
df693c0113
config.h/dda.c: make endstop debouncing steps configurable.
2011-10-23 19:51:46 +02:00
448df5d1c3
config.*.h: raise default acceleration values.
...
Recommendation by Sublime, see
http://forums.reprap.org/read.php?147,99780,99912#msg-99912
2011-10-05 14:13:44 +02:00
e88becbad9
Config: don't enable soft axis limits by default.
...
This is confusing for newbies when their host of choice tries
to move into negative space.
You know ...
"Just installed Teacup and it's trash, because motors don't move!"
2011-10-05 14:13:32 +02:00
f9a4495aa1
Introduce TEMP_NONE, a "sensor" just storing the target temperature.
...
This is useful when operation a milling spindle. In this case,
set the spindle speed with M104 Sxxx, where xxx is 1..255.
M104 S0 turns the spindle off.
2011-09-01 19:03:33 +02:00
f55e9ec051
Apply 58f4678253 to config.gen7.h as well.
2011-08-30 12:08:09 +02:00
4f748c68b1
Bring config.gen7.h up do date.
...
There was a recent rename which wasn't in the contributed example yet.
2011-08-30 12:08:06 +02:00
c863261eaa
Contribution by Schmelly: config and thermistor table for Gen7.
2011-08-30 12:08:00 +02:00
Markus Hitter