Configs are always included via a config_wrapper.h now, and configs always
must include this safety-definition for a missing DEFINE_HEATER. Let's
simplify the configs by moving it to a common location.
You can reduce the max. power of each heater.
With the max_pwm value between 1 and 100% you reduce the active pwm.
For example you could reduce the power of your hotend.
My hotend for example is 12V 30W but connected to 24V. So it has
normally 120W. This is very huge. Setting the max_pwm to 25, it has
again ~30W.
Having a choice with a defined set of options is nice, but it
also requires these options to be #defined somewhere _before_
entering config.h. To keep class-like encapsulation, we'd need
two header files for each code unit, one for the options, another
one for the usual header.
That said, we use other examples of such options, e.g. CPU, F_CPU
or KINEMATICS. For CPU and F_CPU it works fine, because their
options are numbers or other values known by the compiler. For
KINEMATICS it kind of works, because this #define is used in only
one place ... and there it's suboptimal already, because no option-
set.
Anyways, I was unsure about this change and if it turns out to be
a poor decision later, it can be reverted.
Most work by Ruslan Popov, collected from various commits and
made compatible with regression tests by Traumflug.
Display test code is now enabled by #defining DISPLAY_BUS to
i2c_twi.
Implemented and tested for both platforms. This is quite a big
commit. Unlike with the previous changes to now choosable PWM
frequencies, all board configuration files and Configtool had
to be changed immediately to deal with the additional parameter
in DEFINE_HEATER() and keep AVR builds working (and regression
tests passing).
These were dropped accidentally, I assume, during the Configtool
template conversion. Without them the INTERCOM feature does not
compile and so board.gen3.h is broken.
Add the gen3 config to testcases and regressiontests to ensure
this does not drop again.
This #include "../arduino.h" was the only reason prohibiting
Configtool users from storing printer and board configuration
files wherever they wanted. Good reason to remove this restriciton.
This also solves a part of issue #152.
Tooltips don't size their box after line lengths, but have their
own idea on how wide to make it. Accordingly one should display
text with newlines only for paragraph delimiters.
This also required adjustments to all the board and printer
description comments. No functional change there.
This should solve issue #148.
These are no longer needed, as they're now created on the fly by
Configtool.
Also pick unique information from there over to Configtool, see
the change in configtool/addsensordlg.h.
Nico Tonnhofer
Phil Hord
Markus Hitter
Ruslan Popov
Witold Sowa
Phil Hord
jbernardis