21e5343552
Add config.h wrapper to simplify test automation
...
Test code which wants to customize config.h can do so without
touching config.h itself by wrapping config.h in a macro variable
which is passed in to the compiler. It defaults to "config.h" if
no override is provided.
This change would break makefile dependency checking since the selection
of a different header file on the command line is not noticed by make
as a build-trigger. To solve this, we add a layer to the BUILDDIR path
so build products are now specific to the USER_CONFIG choice if it is
not "config.h".
2014-03-04 19:56:23 +01:00
0eecdf895b
Temperature tables: add missing const qualifiers.
...
Spotted and fixed by wrtlprnft, thanks for the contribution.
2013-11-16 17:31:28 +01:00
26b9a7df54
extruder: Add dummy temp sensor so analog_mask includes trim pot.
2011-04-12 20:38:28 +02:00
e937b052af
Add support for multiple thermistor tables.
...
DEFINE_TEMP_SENSOR takes one additional argument. For TT_THERMISOR you can specify there which thermistor table to use.
2011-04-12 20:00:18 +02:00
1d556e0278
Use HEATER_BED everywhere.
...
For intercom heated bed it may be different from HEATER_bed.
2011-04-11 22:41:50 +02:00
c54c964fc0
initialise heaters on timers 3/4/5
2011-04-11 11:22:09 +10:00
d97a4519d3
extruder: Get rid of _CONFIG_H, like on the mainboard config.
2011-04-07 03:29:17 +02:00
0a92c13051
extruder: sync heater.c
2011-04-05 02:14:34 +02:00
57a75ecbfb
temp: TEMP_RESIDENCY_TIME is in seconds not in temp_ticks (=10ms)
2011-04-04 09:21:32 +10:00
be18eb90b8
Convert TEMP_HYSTERESIS to Celsius.
2011-04-04 09:12:54 +10:00
093d20481e
heater: fix residency compare.
...
labs requires a signed int.
2011-04-04 09:12:54 +10:00
9860d2850f
heater: only reset residency if temp really changed
...
Skeinforge generates sometimes multiple calls to M104/M140, which would add a slow delay on the next M101.
2011-04-04 09:12:53 +10:00
3a271ee487
intercom: make sure extruder switches to listen mode
2011-04-04 09:12:53 +10:00
dba60ba1eb
fix error: lvalue required as unary '&' operand when heater pin is not a PWMable pin.
2011-04-04 09:10:25 +10:00
66415078e5
update extruder to match simplified heater
2011-03-28 21:54:58 +11:00
3c3624542f
simplify heater configuration by using arduino_*.h more effectively with DEFINE_HEATER macro
2011-03-28 18:45:28 +11:00
d7f5c08174
all defines live in config.h now, remove from Makefile
2011-03-24 11:26:11 +11:00
918e3be84c
include thermistor tables, most users seem to have similar thermistors so we can safely provide a default
2011-03-24 11:06:04 +11:00
0ddb40a844
IDE apparently takes issue with Extruder.pde in extruder directory, altered capitalisation
2011-03-24 10:58:51 +11:00
081b693341
extruder doesn't use serial.c, update watchdog.c to suit
2011-03-24 10:51:57 +11:00
196caff134
Extruder: GEN3 and EXTRUDER defined in config, not Makefile
2011-03-24 10:31:33 +11:00
0dc7d77885
Massive Doxygen documentation addition
...
'make doc' then point your browser at doc/html/
Needs plenty of cleanup and polishing, but the main bulk is here
even documents your configuration! ;)
2011-03-22 01:34:36 +11:00
f9842d1d90
extruder/config.h.dist: add fallbacks for non-Makefile compilation.
2011-03-19 22:15:22 +01:00
dba296d3d2
Complete project renaming
2011-03-07 13:44:54 +11:00
2340808695
start implementing intercom protocol rehash
2011-03-05 13:38:12 +11:00
d0601716e8
reorganise intercom to send packets from extruder main loop, also generalise protocol as discussed in forum
2011-03-05 13:38:12 +11:00
815ff7ba19
lots of other files in extruder desynced, needed to wrap an ifdef around heater_print
2011-02-28 09:44:29 +11:00
3647c6f1a9
intercom: extruder only replies if talked to
2011-02-27 23:05:33 +01:00
8188ff3593
merge intercom-protocol into master
2011-02-21 16:01:27 +11:00
bfae6ff97f
intercom: Reduce sections with disabled interrupts.
2011-02-21 15:52:17 +11:00
fa2a4389fc
intercom: Transmit/receive from/to temporary packets.
...
Fixes that the packet could be changed during transmit. And only values from packets with correct checksum are used.
2011-02-21 15:52:16 +11:00
5e56784ac1
extruder: Set/get bed temperature.
2011-02-21 15:52:16 +11:00
6d83bdb067
extruder: add fan definitions
2011-02-21 15:52:15 +11:00
e032cf5dab
extruder: Use pull up resistors for step/dir pin to avoid noise.
2011-02-21 15:52:15 +11:00
d0cbe86a2d
extruder: Half-step on every step signal.
...
No idea why only every 4th step signal would actually step, but this generates a lot of noise for nothing.
2011-02-21 15:52:15 +11:00
e3672da1cf
extruder: Check the step pin directly.
...
Flag could get out of sync, with undefined results.
2011-02-21 15:52:15 +11:00
5cf550733d
arduino_168: define AIO6/7
2011-02-21 15:52:14 +11:00
b0d1ba0e60
Fix analog reading of channel 0 if another channel is active.
2011-02-15 13:24:53 +11:00
bcd47e90b0
Fix analog reading of channel 0 if another channel is active.
2011-02-15 13:21:45 +11:00
e41e659e66
intercom: Disable rx while doing tx. Avoids local RS485 half-duplex echo.
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-14 11:31:45 +11:00
959bae2f4a
intercom: Add delay before slave replies. Without it the first byte gets lost.
2011-02-14 11:08:08 +11:00
a3b1529607
intercom: don't store start byte twice.
2011-02-14 11:08:08 +11:00
e6a137d5f1
intercom: Init start byte.
2011-02-14 11:08:08 +11:00
b1a48994dd
preliminary untested implementation of Markus Amsler's new extruder comms protocol
2011-02-12 23:59:19 +11:00
fc57cfc5de
Add Extruder.pde, so extruder is compilable with Arduino IDE
2011-02-09 07:48:29 +11:00
266c6ee0e2
merge release-candidate-triffid
2011-01-07 23:29:32 +11:00
Phil Hord
Markus Hitter
Markus Amsler
Michael Moon
Markus Amsler
Vaclav Ax Hula