There's nothing special about this config.h, it's just the one I
happened to use for first profiling investigations. To allow
everybody else to do the very same profiling runs, I add it here.
Doing profiling isn't too complicated:
mv config.h config.h.backup
ln -s testcases/config.h.Profiling config.h
git checkout -b work
git cherry-pick simulavr # add tweaks convenient for simulation runs
make
cd testcases
./run-in-simulavr.sh short-moves.gcode smooth-curves.gcode triangle-odd.gcode
After being done you can restore your config.h and delete this work branch.
Currently, performance is as following (with convenience commit applied):
SIZES ATmega... '168 '328(P) '644(P) '1280
FLASH : 20270 bytes 142% 66% 32% 16%
RAM : 2302 bytes 225% 113% 57% 29%
EEPROM: 32 bytes 4% 2% 2% 1%
short-moves.gcode
Statistics (assuming a 20 MHz clock):
LED on occurences: 888.
Sum of all LED on time: 279945 clock cycles.
LED on time minimum: 306 clock cycles.
LED on time maximum: 722 clock cycles.
LED on time average: 315.253 clock cycles.
smooth-curves.gcode
Statistics (assuming a 20 MHz clock):
LED on occurences: 9124.
Sum of all LED on time: 3297806 clock cycles.
LED on time minimum: 311 clock cycles.
LED on time maximum: 712 clock cycles.
LED on time average: 361.443 clock cycles.
triangle-odd.gcode
Statistics (assuming a 20 MHz clock):
LED on occurences: 1636.
Sum of all LED on time: 546946 clock cycles.
LED on time minimum: 306 clock cycles.
LED on time maximum: 712 clock cycles.
LED on time average: 334.319 clock cycles.
Markus Hitter