josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
496 Commits 1 Branch 0 Tags 6.3 MiB
Commit Graph

43 Commits

Author SHA1 Message Date
Markus Amsler e937b052af Add support for multiple thermistor tables. 
DEFINE_TEMP_SENSOR takes one additional argument. For TT_THERMISOR you can specify there which thermistor table to use.
 2011-04-12 20:00:18 +02:00
Markus Amsler 1d556e0278 Use HEATER_BED everywhere. 
For intercom heated bed it may be different from HEATER_bed.
 2011-04-11 22:41:50 +02:00
Michael Moon c54c964fc0 initialise heaters on timers 3/4/5 2011-04-11 11:22:09 +10:00
Markus Amsler d97a4519d3 extruder: Get rid of _CONFIG_H, like on the mainboard config. 2011-04-07 03:29:17 +02:00
Markus Amsler 0a92c13051 extruder: sync heater.c 2011-04-05 02:14:34 +02:00
Markus Amsler 57a75ecbfb temp: TEMP_RESIDENCY_TIME is in seconds not in temp_ticks (=10ms) 2011-04-04 09:21:32 +10:00
Markus Amsler be18eb90b8 Convert TEMP_HYSTERESIS to Celsius. 2011-04-04 09:12:54 +10:00
Markus Amsler 093d20481e heater: fix residency compare. 
labs requires a signed int.
 2011-04-04 09:12:54 +10:00
Markus Amsler 9860d2850f heater: only reset residency if temp really changed 
Skeinforge generates sometimes multiple calls to M104/M140, which would add a slow delay on the next M101.
 2011-04-04 09:12:53 +10:00
Markus Amsler 3a271ee487 intercom: make sure extruder switches to listen mode 2011-04-04 09:12:53 +10:00
Michael Moon dba60ba1eb fix error: lvalue required as unary '&' operand when heater pin is not a PWMable pin. 2011-04-04 09:10:25 +10:00
Michael Moon 66415078e5 update extruder to match simplified heater 2011-03-28 21:54:58 +11:00
Michael Moon 3c3624542f simplify heater configuration by using arduino_*.h more effectively with DEFINE_HEATER macro 2011-03-28 18:45:28 +11:00
Michael Moon d7f5c08174 all defines live in config.h now, remove from Makefile 2011-03-24 11:26:11 +11:00
Michael Moon 918e3be84c include thermistor tables, most users seem to have similar thermistors so we can safely provide a default 2011-03-24 11:06:04 +11:00
Michael Moon 0ddb40a844 IDE apparently takes issue with Extruder.pde in extruder directory, altered capitalisation 2011-03-24 10:58:51 +11:00
Michael Moon 081b693341 extruder doesn't use serial.c, update watchdog.c to suit 2011-03-24 10:51:57 +11:00
Michael Moon 196caff134 Extruder: GEN3 and EXTRUDER defined in config, not Makefile 2011-03-24 10:31:33 +11:00
Michael Moon 0dc7d77885 Massive Doxygen documentation addition 
'make doc' then point your browser at doc/html/

Needs plenty of cleanup and polishing, but the main bulk is here

even documents your configuration! ;)
 2011-03-22 01:34:36 +11:00
Markus Hitter f9842d1d90 extruder/config.h.dist: add fallbacks for non-Makefile compilation. 2011-03-19 22:15:22 +01:00
Vaclav Ax Hula dba296d3d2 Complete project renaming 2011-03-07 13:44:54 +11:00
Michael Moon 2340808695 start implementing intercom protocol rehash 2011-03-05 13:38:12 +11:00
Michael Moon d0601716e8 reorganise intercom to send packets from extruder main loop, also generalise protocol as discussed in forum 2011-03-05 13:38:12 +11:00
Michael Moon 815ff7ba19 lots of other files in extruder desynced, needed to wrap an ifdef around heater_print 2011-02-28 09:44:29 +11:00
Markus Amsler 3647c6f1a9 intercom: extruder only replies if talked to 2011-02-27 23:05:33 +01:00
Michael Moon 8188ff3593 merge intercom-protocol into master 2011-02-21 16:01:27 +11:00
Markus Amsler bfae6ff97f intercom: Reduce sections with disabled interrupts. 2011-02-21 15:52:17 +11:00
Markus Amsler fa2a4389fc intercom: Transmit/receive from/to temporary packets. 
Fixes that the packet could be changed during transmit. And only values from packets with correct checksum are used.
 2011-02-21 15:52:16 +11:00
Markus Amsler 5e56784ac1 extruder: Set/get bed temperature. 2011-02-21 15:52:16 +11:00
Markus Amsler 6d83bdb067 extruder: add fan definitions 2011-02-21 15:52:15 +11:00
Markus Amsler e032cf5dab extruder: Use pull up resistors for step/dir pin to avoid noise. 2011-02-21 15:52:15 +11:00
Markus Amsler d0cbe86a2d extruder: Half-step on every step signal. 
No idea why only every 4th step signal would actually step, but this generates a lot of noise for nothing.
 2011-02-21 15:52:15 +11:00
Markus Amsler e3672da1cf extruder: Check the step pin directly. 
Flag could get out of sync, with undefined results.
 2011-02-21 15:52:15 +11:00
Markus Amsler 5cf550733d arduino_168: define AIO6/7 2011-02-21 15:52:14 +11:00
Markus Amsler b0d1ba0e60 Fix analog reading of channel 0 if another channel is active. 2011-02-15 13:24:53 +11:00
Markus Amsler bcd47e90b0 Fix analog reading of channel 0 if another channel is active. 2011-02-15 13:21:45 +11:00
Markus Amsler e41e659e66 intercom: Disable rx while doing tx. Avoids local RS485 half-duplex echo. 
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
 2011-02-14 11:31:45 +11:00
Markus Amsler 959bae2f4a intercom: Add delay before slave replies. Without it the first byte gets lost. 2011-02-14 11:08:08 +11:00
Markus Amsler a3b1529607 intercom: don't store start byte twice. 2011-02-14 11:08:08 +11:00
Markus Amsler e6a137d5f1 intercom: Init start byte. 2011-02-14 11:08:08 +11:00
Michael Moon b1a48994dd preliminary untested implementation of Markus Amsler's new extruder comms protocol 2011-02-12 23:59:19 +11:00
Markus Amsler fc57cfc5de Add Extruder.pde, so extruder is compilable with Arduino IDE 2011-02-09 07:48:29 +11:00
Michael Moon 266c6ee0e2 merge release-candidate-triffid 2011-01-07 23:29:32 +11:00