f9a4495aa1
Introduce TEMP_NONE, a "sensor" just storing the target temperature.
...
This is useful when operation a milling spindle. In this case,
set the spindle speed with M104 Sxxx, where xxx is 1..255.
M104 S0 turns the spindle off.
2011-09-01 19:03:33 +02:00
d97a4519d3
extruder: Get rid of _CONFIG_H, like on the mainboard config.
2011-04-07 03:29:17 +02:00
3c3624542f
simplify heater configuration by using arduino_*.h more effectively with DEFINE_HEATER macro
2011-03-28 18:45:28 +11:00
d0601716e8
reorganise intercom to send packets from extruder main loop, also generalise protocol as discussed in forum
2011-03-05 13:38:12 +11:00
31634c6a8f
Add M136 (DEBUG) to read back PID values, add heater_print function
2011-02-20 17:30:07 +11:00
71eafbf96b
keep power on when heaters are active
...
Reported-by: Jacky2K@forums.reprap.org
2011-02-09 08:16:15 +11:00
553f3a50a6
some config templates, also bang-bang heater support to reduce code size
2011-02-07 20:48:57 +11:00
1c723f7656
remove definition macros, doesn't work
2011-02-06 21:11:39 +11:00
d1b2754aba
sorting out preprocessor interactions
2011-02-06 21:11:39 +11:00
97f344f0fa
changes discussed in chat on pull 19
2011-02-06 21:11:39 +11:00
fcaa76d3c0
Simpler definition of temp sensors and heaters.
2011-02-01 19:40:27 +11:00
096d7dfdf3
Merge release-candidate-triffid branch
2011-01-07 23:09:13 +11:00
3028b297f3
Add simulation code: use "make sim"
2010-10-21 11:05:55 +11:00
80d3fc5233
Revert "heater.h: simplify macros.", as there are in fact situations
...
where this seemingly obsolete code makes sense.
This reverts commit 896f6e140f
2010-10-08 12:49:02 +02:00
90c00d0eff
heater.h: remove the temp_achieved() declaration, which has
...
no definition in heater.c (but is properly coded in temp.h/.c).
2010-10-07 23:43:51 +02:00
2391dc2901
If there's no HEATER_PIN, there's no heater, so disable the
...
heater code. Also remove the temp_achieved() declaration
in heater.h, which has no definition in heater.c.
If you wonder about what might be the use of not having a heater,
think about a paste dispenser or an externally heated extruder :-)
Having no heater removes a whopping 1200 bytes of program size.
2010-10-07 23:43:46 +02:00
896f6e140f
heater.h: simplify macros.
2010-10-07 23:43:44 +02:00
68f4610e79
heater.h/.c: remove a few obsolete #includes.
2010-10-07 23:43:36 +02:00
9839ac9fff
Move heater macros from config.h to heater.h, as they're
...
not meant to be user configurable.
2010-10-07 23:43:22 +02:00
273d63f242
splitting heater stuff out into a separate file
2010-09-12 14:47:49 +10:00
Markus Hitter
Markus Amsler
Michael Moon
Stephan Walter