import wx
from configtool.page import Page


class PinoutsPage(wx.Panel, Page):
  def __init__(self, parent, nb, idPg, font):
    wx.Panel.__init__(self, nb, wx.ID_ANY)
    Page.__init__(self, font)
    self.parent = parent
    self.id = idPg

    pinXkeys = [('X_STEP_PIN', 2), ('X_DIR_PIN', 2), ('X_MIN_PIN', 2),
                ('X_MAX_PIN', 2), ('X_ENABLE_PIN', 2), ('X_INVERT_DIR', 1),
                ('X_INVERT_MIN', 1), ('X_INVERT_MAX', 1),
                ('X_INVERT_ENABLE', 1)]
    pinYkeys = [('Y_STEP_PIN', 2), ('Y_DIR_PIN', 2), ('Y_MIN_PIN', 2),
                ('Y_MAX_PIN', 2), ('Y_ENABLE_PIN', 2), ('Y_INVERT_DIR', 1),
                ('Y_INVERT_MIN', 1), ('Y_INVERT_MAX', 1),
                ('Y_INVERT_ENABLE', 1)]
    pinZkeys = [('Z_STEP_PIN', 2), ('Z_DIR_PIN', 2), ('Z_MIN_PIN', 2),
                ('Z_MAX_PIN', 2), ('Z_ENABLE_PIN', 2), ('Z_INVERT_DIR', 1),
                ('Z_INVERT_MIN', 1), ('Z_INVERT_MAX', 1),
                ('Z_INVERT_ENABLE', 1)]
    pinEkeys = [('E_STEP_PIN', 2), ('E_DIR_PIN', 2), ('E_ENABLE_PIN', 2),
                ('E_INVERT_DIR', 1), ('E_INVERT_ENABLE', 1)]

    self.labels = {'X_STEP_PIN': "Step Pin:", 'X_DIR_PIN': "Direction Pin:",
                   'X_MIN_PIN': "Minimum Pin:", 'X_MAX_PIN': "Maximum Pin:",
                   'X_ENABLE_PIN': "Enable Pin:",
                   'X_INVERT_DIR': "Invert Direction",
                   'X_INVERT_MIN': "Invert Minimum",
                   'X_INVERT_MAX': "Invert Maximum",
                   'X_INVERT_ENABLE': "Invert Enable",

                   'Y_STEP_PIN': "Step Pin:", 'Y_DIR_PIN': "Direction Pin:",
                   'Y_MIN_PIN': "Minimum Pin:", 'Y_MAX_PIN': "Maximum Pin:",
                   'Y_ENABLE_PIN': "Enable Pin:",
                   'Y_INVERT_DIR': "Invert Direction",
                   'Y_INVERT_MIN': "Invert Minimum",
                   'Y_INVERT_MAX': "Invert Maximum",
                   'Y_INVERT_ENABLE': "Invert Enable",

                   'Z_STEP_PIN': "Step Pin:", 'Z_DIR_PIN': "Direction Pin:",
                   'Z_MIN_PIN': "Minimum Pin:", 'Z_MAX_PIN': "Maximum Pin:",
                   'Z_ENABLE_PIN': "Enable Pin:",
                   'Z_INVERT_DIR': "Invert Direction",
                   'Z_INVERT_MIN': "Invert Minimum",
                   'Z_INVERT_MAX': "Invert Maximum",
                   'Z_INVERT_ENABLE': "Invert Enable",

                   'E_STEP_PIN': "Step Pin:", 'E_DIR_PIN': "Direction Pin:",
                   'E_ENABLE_PIN': "Enable Pin:",
                   'E_INVERT_DIR': "Invert Direction",
                   'E_INVERT_ENABLE': "Invert Enable",

                   'PS_ON_PIN': "PSU On Pin:",
                   'PS_INVERT_ON': "Invert PSU On Pin",
                   'PS_MOSFET_PIN': "PSU MOSFET Pin:",

                   'STEPPER_ENABLE_PIN': "Stepper Enable Pin:",
                   'STEPPER_INVERT_ENABLE': "Stepper Invert Enable",

                   'SD_CARD_SELECT_PIN': "SD Card Pin:",
                   'DEBUG_LED_PIN': "Debug LED Pin:"}

    labelWidth = 120

    sz = wx.GridBagSizer()
    sz.Add((10, 10), pos = (0, 0))

    b = wx.StaticBox(self, wx.ID_ANY, "X Axis")
    b.SetFont(font)
    sbox = wx.StaticBoxSizer(b, wx.VERTICAL)
    sbox.Add((5, 5))
    for k, ctype in pinXkeys:
      if ctype == 0:
        tc = self.addTextCtrl(k, labelWidth, self.onTextCtrlPin)
        sbox.Add(tc)
      elif ctype == 2:
        tc = self.addPinChoice(k, labelWidth)
        sbox.Add(tc)
      else:
        cb = self.addCheckBox(k, self.onCheckBox)
        sbox.Add(cb, 1, wx.LEFT, 30)

      sbox.Add((5, 5))

    sz.Add(sbox, pos = (1, 1))

    b = wx.StaticBox(self, wx.ID_ANY, "Y Axis")
    b.SetFont(font)
    sbox = wx.StaticBoxSizer(b, wx.VERTICAL)
    sbox.Add((5, 5))
    for k, ctype in pinYkeys:
      if ctype == 0:
        tc = self.addTextCtrl(k, labelWidth, self.onTextCtrlPin)
        sbox.Add(tc)
      elif ctype == 2:
        tc = self.addPinChoice(k, labelWidth)
        sbox.Add(tc)
      else:
        cb = self.addCheckBox(k, self.onCheckBox)
        sbox.Add(cb, 1, wx.LEFT, 30)

      sbox.Add((5, 5))

    sz.Add(sbox, pos = (1, 3))

    b = wx.StaticBox(self, wx.ID_ANY, "Z Axis")
    b.SetFont(font)
    sbox = wx.StaticBoxSizer(b, wx.VERTICAL)
    sbox.Add((5, 5))
    for k, ctype in pinZkeys:
      if ctype == 0:
        tc = self.addTextCtrl(k, labelWidth, self.onTextCtrlPin)
        sbox.Add(tc)
      elif ctype == 2:
        tc = self.addPinChoice(k, labelWidth)
        sbox.Add(tc)
      else:
        cb = self.addCheckBox(k, self.onCheckBox)
        sbox.Add(cb, 1, wx.LEFT, 30)

      sbox.Add((5, 5))

    sz.Add(sbox, pos = (1, 5))

    b = wx.StaticBox(self, wx.ID_ANY, "E Axis")
    b.SetFont(font)
    sbox = wx.StaticBoxSizer(b, wx.VERTICAL)
    sbox.Add((5, 5))
    for k, ctype in pinEkeys:
      if ctype == 0:
        tc = self.addTextCtrl(k, labelWidth, self.onTextCtrlPin)
        sbox.Add(tc)
      elif ctype == 2:
        tc = self.addPinChoice(k, labelWidth)
        sbox.Add(tc)
      else:
        cb = self.addCheckBox(k, self.onCheckBox)
        sbox.Add(cb, 1, wx.LEFT, 30)

      sbox.Add((5, 5))

    sz.Add(sbox, pos = (1, 7))

    k = "STEPPER_ENABLE_PIN"
    tc = self.addPinChoice(k, labelWidth + 20)
    sz.Add(tc, pos = (3, 1))

    sz.Add((10, 10), pos = (4, 1))

    k = "STEPPER_INVERT_ENABLE"
    cb = self.addCheckBox(k, self.onCheckBox)
    sz.Add(cb, pos = (5, 1), flag = wx.ALIGN_CENTER_HORIZONTAL)

    k = "PS_ON_PIN"
    tc = self.addPinChoice(k, labelWidth)
    sz.Add(tc, pos = (3, 3))

    k = "PS_INVERT_ON"
    cb = self.addCheckBox(k, self.onCheckBox)
    sz.Add(cb, pos = (5, 3), flag = wx.ALIGN_CENTER_HORIZONTAL)

    k = "PS_MOSFET_PIN"
    tc = self.addPinChoice(k, labelWidth)
    sz.Add(tc, pos = (7, 3))

    k = "SD_CARD_SELECT_PIN"
    tc = self.addPinChoice(k, labelWidth)
    sz.Add(tc, pos = (3, 7))

    k = "DEBUG_LED_PIN"
    tc = self.addPinChoice(k, labelWidth)
    sz.Add(tc, pos = (5, 7))

    self.SetSizer(sz)
    self.enableAll(False)

  def onChoice(self, evt):
    self.assertModified(True)
    evt.Skip()