import wx
from configtool.data import BSIZESMALL, reFloat, offsetChLabel, offsetTcLabel


class CalcScrew(wx.Dialog):
  def __init__(self, parent, font, cbUse):
    wx.Dialog.__init__(self, parent, wx.ID_ANY,
                       "Steps calculator for screw driven axes",
                       size = (400, 204))
    self.SetFont(font)
    self.Bind(wx.EVT_CLOSE, self.onExit)

    self.use = cbUse
    labelWidth = 150

    hsz = wx.BoxSizer(wx.HORIZONTAL)
    hsz.Add((10, 10))

    sz = wx.BoxSizer(wx.VERTICAL)
    sz.Add((10, 10))

    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Step Angle:", size = (labelWidth, -1),
                       style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st, 1, wx.TOP, offsetChLabel)
    lsz.Add((5, 5))

    stepAngles = ["1.8 (200 per revolution)", "0.9 (400 per revolution)",
                  "7.5 (48 per revolution)"]
    self.stepAngleValues = [200, 400, 48]
    tc = wx.Choice(self, wx.ID_ANY, choices = stepAngles)
    tc.SetFont(font)
    tc.SetSelection(0)
    tc.Bind(wx.EVT_CHOICE, self.onChoice)
    lsz.Add(tc)
    tc.SetToolTip("Step angle. Depends on your type of stepper motor.")
    self.tcStep = tc

    sz.Add(lsz)
    sz.Add((10, 10))

    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Microstepping:",
                       size = (labelWidth, -1), style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st, 1, wx.TOP, offsetChLabel)
    lsz.Add((5, 5))

    microStepping = ["1 - full step", "1/2 - half step", "1/4 - quarter step",
                     "1/8", "1/16", "1/32", "1/64", "1/128"]
    self.microSteppingValues = [1, 2, 4, 8, 16, 32, 64, 128]
    tc = wx.Choice(self, wx.ID_ANY, choices = microStepping)
    tc.SetFont(font)
    tc.Bind(wx.EVT_CHOICE, self.onChoice)
    tc.SetSelection(4)
    lsz.Add(tc)
    tc.SetToolTip("Microstepping. Most boards allow to change this by "
                        "setting jumpers. The value here must match the "
                        "setting on the board in conjunction with the type "
                        "of stepper driver chip.")
    self.tcMicroStepping = tc

    sz.Add(lsz)
    sz.Add((10, 10))

    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Screw Pitch (mm/rev):",
                       size = (labelWidth, -1), style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st, 1, wx.TOP, offsetTcLabel)
    lsz.Add((5, 5))

    tc = wx.TextCtrl(self, wx.ID_ANY, "2", style = wx.TE_RIGHT)
    tc.SetFont(font)
    tc.Bind(wx.EVT_TEXT, self.onTextCtrlFloat)
    lsz.Add(tc)
    tc.SetToolTip("Screw pitch. Defined by the pitch of the screw.")
    self.tcScrewPitch = tc

    lsz.Add((5, 5))

    screwPresets = ["-", "M8 - metric (1.25 mm/rev)", "M6 - metric (1 mm/rev)",
                    "M5 - metric (0.8 mm/rev)", "12 (12 mm/rev)",
                    "16 (16 mm/rev)", "25 (25 mm/rev)",
                    "5/15\"-18 imperial coarse (1.41111 mm/rev)",
                    "3/16\"-20 imperial (1.270 mm/rev)",
                    "1/4\"-16 ACME (1.5875 mm/rev)"]
    self.screwPresetValues = [-1, 1.25, 1.00, 0.8, 12.0, 16.0, 25.0, 1.41111,
                              1.270, 1.5875]
    tc = wx.Choice(self, wx.ID_ANY, choices = screwPresets)
    tc.SetFont(font)
    tc.SetSelection(0)
    tc.Bind(wx.EVT_CHOICE, self.onPresetChoice)
    lsz.Add(tc)
    tc.SetToolTip("Screw pitch presets.")
    self.tcPresets = tc

    sz.Add(lsz)
    sz.Add((10, 10))

    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Gear Ratio:", size = (labelWidth, -1),
                       style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st, 1, wx.TOP, offsetTcLabel)
    lsz.Add((5, 5))

    tc = wx.TextCtrl(self, wx.ID_ANY, "1", size = (40, -1), style = wx.TE_RIGHT)
    tc.SetFont(font)
    tc.Bind(wx.EVT_TEXT, self.onTextCtrlFloat)
    lsz.Add(tc)
    tc.SetToolTip("Gear ratio. 1:1 if there is no gear.")
    self.tcRatioTop = tc

    lsz.Add((5, 5))
    st = wx.StaticText(self, wx.ID_ANY, ":")
    st.SetFont(font)
    lsz.Add(st)
    lsz.Add((5, 5))

    tc = wx.TextCtrl(self, wx.ID_ANY, "1", size = (40, -1), style = wx.TE_RIGHT)
    tc.SetFont(font)
    tc.Bind(wx.EVT_TEXT, self.onTextCtrlFloat)
    lsz.Add(tc)
    tc.SetToolTip("Gear ratio. 1:1 if there is no gear.")
    self.tcRatioBottom = tc

    sz.Add(lsz)
    sz.Add((30, 30))

    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Result:", size = (labelWidth, -1),
                       style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st)
    lsz.Add((5, 5))

    tc = wx.StaticText(self, wx.ID_ANY, "", size = (300, -1),
                       style = wx.ALIGN_LEFT)
    tc.SetFont(font)
    lsz.Add(tc)
    self.tcResult = tc

    sz.Add(lsz)
    lsz = wx.BoxSizer(wx.HORIZONTAL)
    st = wx.StaticText(self, wx.ID_ANY, "Resolution:", size = (labelWidth, -1),
                       style = wx.ALIGN_RIGHT)
    st.SetFont(font)
    lsz.Add(st)
    lsz.Add((5, 5))

    tc = wx.StaticText(self, wx.ID_ANY, "", size = (300, -1),
                       style = wx.ALIGN_LEFT)
    tc.SetFont(font)
    lsz.Add(tc)
    self.tcResolution = tc

    sz.Add(lsz)

    sz.Add((20, 20))

    bsz = wx.BoxSizer(wx.HORIZONTAL)
    b = wx.Button(self, wx.ID_ANY, "Use for X", size = BSIZESMALL)
    b.SetFont(font)
    self.Bind(wx.EVT_BUTTON, self.onUseForX, b)
    bsz.Add(b)
    self.bUseForX = b
    bsz.Add((5, 5))

    b = wx.Button(self, wx.ID_ANY, "Use for Y", size = BSIZESMALL)
    b.SetFont(font)
    self.Bind(wx.EVT_BUTTON, self.onUseForY, b)
    bsz.Add(b)
    self.bUseForY = b
    bsz.Add((5, 5))

    b = wx.Button(self, wx.ID_ANY, "Use for Z", size = BSIZESMALL)
    b.SetFont(font)
    self.Bind(wx.EVT_BUTTON, self.onUseForZ, b)
    bsz.Add(b)
    self.bUseForZ = b
    bsz.Add((5, 5))

    b = wx.Button(self, wx.ID_ANY, "Use for E", size = BSIZESMALL)
    b.SetFont(font)
    self.Bind(wx.EVT_BUTTON, self.onUseForE, b)
    bsz.Add(b)
    self.bUseForE = b

    sz.Add(bsz, flag = wx.ALIGN_CENTER_HORIZONTAL)
    sz.Add((10, 10))

    hsz.Add(sz)
    hsz.Add((10, 10))

    self.enableUseButtons(False)

    self.SetSizer(hsz)

    self.Fit()

    self.calculate()

  def calculate(self):
    self.tcResult.SetLabel("")
    self.tcResolution.SetLabel("")
    self.enableUseButtons(False)
    s = self.tcStep.GetSelection()
    sv = self.stepAngleValues[s]

    try:
      sp = float(self.tcScrewPitch.GetValue())
    except:
      return

    try:
      ratioA = float(self.tcRatioTop.GetValue())
    except:
      return

    try:
      ratioB = float(self.tcRatioBottom.GetValue())
    except:
      return

    s = self.tcMicroStepping.GetSelection()
    msv = self.microSteppingValues[s]

    ratio = ratioA / ratioB
    steps = sv * msv

    resultmm = steps / sp / ratio
    self.result = int(resultmm * 1000.0)

    self.tcResult.SetLabel("%d steps/m   (%.3f steps/mm)" %
                           (self.result, resultmm))
    self.tcResolution.SetLabel("%.3f micrometers" % (1.0 / resultmm * 1000.0))
    self.enableUseButtons(True)

  def enableUseButtons(self, flag):
    self.bUseForX.Enable(flag)
    self.bUseForY.Enable(flag)
    self.bUseForZ.Enable(flag)
    self.bUseForE.Enable(flag)

  def onUseForX(self, evt):
    self.use('STEPS_PER_M_X', self.result)

  def onUseForY(self, evt):
    self.use('STEPS_PER_M_Y', self.result)

  def onUseForZ(self, evt):
    self.use('STEPS_PER_M_Z', self.result)

  def onUseForE(self, evt):
    self.use('STEPS_PER_M_E', self.result)

  def onPresetChoice(self, evt):
    s = self.tcPresets.GetSelection()
    sv = self.screwPresetValues[s]
    if sv < 0:
      return

    s = "%f" % sv
    s = s.rstrip("0")
    if s[-1] == ".":
      s += "0"
    self.tcScrewPitch.SetValue(s)

  def onChoice(self, evt):
    self.calculate()

  def onTextCtrlFloat(self, evt):
    tc = evt.GetEventObject()
    w = tc.GetValue().strip()
    if w == "":
      valid = False
    else:
      m = reFloat.match(w)
      if m:
        valid = True
      else:
        valid = False

    if valid:
      tc.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_WINDOW))
    else:
      tc.SetBackgroundColour("pink")
    tc.Refresh()
    self.calculate()
    evt.Skip()

  def onExit(self, evt):
    self.EndModal(wx.ID_OK)