josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,131 Commits 1 Branch 0 Tags 6.3 MiB
Go to file
Markus Hitter 03b68e2738 SD card: remove sd.c 
This file was never in use and actually didn't even compile.
It didn't disturb so far because its whole content was wrapped
in #if 0. Recently it was fixed to at least compile, but code
quality was found to be poor enough to justify looking for
something written more carefully, which was found in FatFs
sample code.
 		2015-06-10 13:56:39 +02:00
attic Add source file for the Teacup logo. 2015-06-10 13:56:13 +02:00
config Refine help text for soft axis limits. 2015-06-06 20:09:06 +02:00
configtool Configtool: allow travel limits to be floats. 2015-06-06 20:08:54 +02:00
extruder analog.h: document and clean up. 2015-05-11 01:17:25 +02:00
research Add gnuplot script to explore simulator output 2013-12-06 19:24:58 +01:00
simulator Rename setTimer() to timer_set() for more consistency. 2015-04-21 02:51:32 +02:00
testcases Configtool: remove Analog Reference user choice. 2015-05-11 02:03:47 +02:00
tools deriv.awk: Calculate derivative of every column 2014-03-04 19:57:28 +01:00
.gitattributes Enforce Unix line endings (LF). 2015-02-04 00:10:37 +01:00
.gitignore Rename ThermistorTable.h to thermistortable.h. 2015-05-04 20:08:39 +02:00
Doxyfile Remove LUFA. 2012-12-03 19:48:54 +01:00
LICENSE licensing- GPL-2 at the moment 2010-10-20 18:15:09 +11:00
Makefile-AVR SIMINFO: fetch device name from Makefile / compile parameters. 2015-04-21 02:51:31 +02:00
Makefile-SIM Makefiles: adjust comments. 2015-04-21 02:51:31 +02:00
Makefile-common Makefiles: adjust comments. 2015-04-21 02:51:31 +02:00
Makefile-example Makefiles: rename "MCU_TARGET" to "MCU". 2015-04-21 02:51:31 +02:00
README Makefiles: adjust comments. 2015-04-21 02:51:31 +02:00
README.sim Teach simulator to process gcode files directly 2013-12-06 19:24:58 +01:00
Teacup_Firmware.pde arduino ide: .pde must have the same name as the folder. 2011-02-27 22:08:41 +01:00
analog.c Zungmann's fixes to compile simulator on Mac OS X, part 2. 2014-03-04 19:57:48 +01:00
analog.h analog.h: document and clean up. 2015-05-11 01:17:25 +02:00
arduino.h Zungmann's fixes to compile simulator on Mac OS X, part 2. 2014-03-04 19:57:48 +01:00
arduino_32U4.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
arduino_168_328p.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
arduino_644.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
arduino_1280.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
arduino_usb1286.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
arduino_usb1287.h Move MAX6675 initialisation from mendel.c to temp.c. 2014-12-26 19:41:38 +01:00
calc.pl setting up new branch 2 2010-08-10 14:26:24 +10:00
clock.c temp.h: remove indirection temp_tick(). 2015-04-21 02:51:31 +02:00
clock.h Move clock stuff from timer.c/.h to clock.c/.h. 2014-10-18 20:57:32 +02:00
config.default.h Configtool: convert template for Teensy++ 2.0. 2015-04-21 02:51:31 +02:00
config_wrapper.h config_wrapper.h: move #include "arduino.h" here. 2015-05-30 18:40:05 +02:00
configtool.default.ini Configtool: move thermistor presets into distribution file. 2015-05-20 23:31:38 +02:00
configtool.py Configtool: wait before erroring out. 2015-06-06 12:05:02 +02:00
crc.c Restore simulation build target. 2013-12-06 19:24:58 +01:00
crc.h use CRC16 to verify heater PID settings in eeprom 2011-02-20 17:13:09 +11:00
createTemperatureLookup.py createTemperatureLookup.py: deal with precision limitation on R0. 2015-04-21 02:51:32 +02:00
dda.c dda.c: fix overflow for large steps/meter values. 2015-06-06 12:04:52 +02:00
dda.h dda.c/.h: reduce debounce counting variable. 2015-01-09 13:11:06 +01:00
dda_kinematics.c CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_kinematics.h CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_lookahead.c dda.c: add some TODOs about duplicate and redundant code. 2014-12-26 19:41:38 +01:00
dda_lookahead.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
dda_maths.c Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
dda_maths.h DDA: have an acceleration constant for each axis individually. 2014-08-31 19:10:14 +02:00
dda_queue.c dda_queue.c: report temperatures spontanuously while heating. 2015-04-26 18:11:43 +02:00
dda_queue.h Remove __attribute__((hot)). 2014-03-04 19:56:13 +01:00
debug.c setting up new branch 2 2010-08-10 14:26:24 +10:00
debug.h Configtool: don't make DEBUG configuration user-visible. 2015-05-08 20:38:23 +02:00
delay.c delay.c: delay_us() and delay_ms() are now calibrated. 2015-04-28 13:05:21 +02:00
delay.h delay.h: re-add falsely removed #include. 2013-03-24 16:19:25 +01:00
extract.py Added gcode documentation and extraction tool 2011-06-03 02:02:46 +10:00
func.sh func.sh: Fix a potential infinite loop in mendel_readsym_target 2011-05-08 00:36:55 +10:00
fuses.h make it even harder to unintentionally include fuse definitions 2011-02-04 11:04:15 +11:00
gcode_parse.c gcode_parse.c: fix E debugging message. 2015-06-06 12:04:36 +02:00
gcode_parse.h gcode_parse.h: raise S word size. 2014-05-29 21:49:29 +02:00
gcode_process.c gcode_process.c: be more explicit about X_MIN,... type. 2015-06-10 13:56:39 +02:00
gcode_process.h gcode_process.c: make special moves non-public. 2011-02-27 11:55:01 +01:00
graycode.c disable greycode by default in arduino IDE 2011-02-17 21:52:15 +11:00
heater.c heater.c: remove some unneccessary #ifdef DEBUG. 2015-05-09 15:11:21 +02:00
heater.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
home.c home.c, dda.c: consider endstops on both axis ends when homing. 2015-01-09 13:11:01 +01:00
home.h Fixed single inclusion of file. Added missing define. 2011-08-16 14:09:49 +02:00
intercom.c Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
intercom.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
memory_barrier.h Simulator cleanup 2013-12-06 19:24:58 +01:00
mendel.c SIMINFO: fetch device name from Makefile / compile parameters. 2015-04-21 02:51:31 +02:00
mendel_cmd Merge release-candidate-triffid branch 2011-01-07 23:09:13 +11:00
pinio.c DDA: Move axis calculations into loops, part 6b. 2014-08-31 19:07:59 +02:00
pinio.h DDA: Move axis calculations into loops, part 6b. 2014-08-31 19:07:59 +02:00
preprocessor_math.h preprocessor_math.h: fix errorneous comment. 2014-08-31 19:32:09 +02:00
sender-mac.sh sender-mac.sh: another minor fix. 2011-09-30 21:02:25 +02:00
sender.sh sender.sh: Allow for "ok" to be surrounded by DEBUG output. 2011-03-04 19:42:00 +11:00
serial.c Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
serial.h Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
sermsg.c sermesg.c: Add documentation tag for variable floating point. 2014-08-31 19:07:21 +02:00
sermsg.h M114 returns millimeters instead of steps 2011-04-26 14:44:17 +10:00
sersendf.c Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
sersendf.h Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
simulator.h Simulator: add pgm_read_dword() macro. 2015-04-21 02:51:32 +02:00
temp.c temp.c: print the right temperature. 2015-05-23 20:36:40 +02:00
temp.h temp.h: remove indirection temp_tick(). 2015-04-21 02:51:31 +02:00
timer.c DDA: on short schedules, repeat step routine immediately ... 2015-04-21 02:51:32 +02:00
timer.h DDA: on short schedules, repeat step routine immediately ... 2015-04-21 02:51:32 +02:00
usb_serial.c Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
usb_serial.h Import USB Serial from http://www.pjrc.com/teensy/usb_serial.html 2012-11-08 16:36:48 +01:00
watchdog.c According to avr-libc documentation, ISR() handles SREG its self. 2013-10-27 20:01:51 +01:00
watchdog.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00

README 

##############################################################################
#                                                                            #
# Teacup - lean and efficient firmware for RepRap printers                   #
#                                                                            #
# by Triffid Hunter, Traumflug, jakepoz, many others.                        #
#                                                                            #
##############################################################################

For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation

For documentation, see
http://reprap.org/wiki/Teacup_Firmware


##############################################################################
#                                                                            #
# This firmware is Copyright (c) ...                                         #
#   2009 - 2010 Michael Moon aka Triffid_Hunter                              #
#   2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de>                  #
#                                                                            #
# This program is free software; you can redistribute it and/or modify       #
# it under the terms of the GNU General Public License as published by       #
# the Free Software Foundation; either version 2 of the License, or          #
# (at your option) any later version.                                        #
#                                                                            #
# This program is distributed in the hope that it will be useful,            #
# but WITHOUT ANY WARRANTY; without even the implied warranty of             #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              #
# GNU General Public License for more details.                               #
#                                                                            #
# You should have received a copy of the GNU General Public License          #
# along with this program; if not, write to the Free Software                #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA #
#                                                                            #
##############################################################################