For now this is just a nice demonstration on how to send bytes
over SPI. Add SD_CARD_SELECT_PIN to your configuration board
file manually to see data signals on MOSI dancing on the scope.
The TODO's about SS in arduino*.h were wrong, SS does have a
chip-specific special meaning (used in SPI multi-master or SPI
slave mode). Still, a #define MAX6675_SELECT_PIN is missing.
Squashed in this commit from the SPI development topic branch to
get this first step working:
Author: jbernardis <jeff.bernardis@gmail.com>
2015-02-04 22:35:07
mendel.c: disable SPI in power management only when not needed.
If we want to talk to a SD card connected to SPI, we need SPI
powered, of course.
From Traumflug: nice catch, Jeff!
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, many others. #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
1fb3ece31e