josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,251 Commits 1 Branch 0 Tags 6.3 MiB
Go to file
Markus Hitter 52e2585f13 ARM: use arduino.h for UART pinout. 
This removes another 36 bytes binary size and six(!) MBED files.

The mess of MBED files is now pretty much resolved, only a few
essential ones left.
 		2015-08-12 14:26:35 +02:00
attic SD card: store sample code for the hardware layer. 2015-07-05 23:32:48 +02:00
config SD card: commit SD_CARD_SELECT_PIN to all the board files. 2015-07-30 15:31:57 +02:00
configtool boardpanel.py: fix getCPUInfo(), don't report tuples. 2015-08-12 14:18:40 +02:00
extruder pinio.h: remove TOGGLE(), GET_INPUT(), GET_OUTPUT() macros. 2015-08-12 14:26:35 +02:00
research Add gnuplot script to explore simulator output 2013-12-06 19:24:58 +01:00
simulator mendel.c: move CPU initialisation to cpu.c (cpu-avr.c). 2015-08-12 14:26:35 +02:00
testcases run-in-simulavr.sh: report LED on time in clocks instead of ns. 2015-08-04 23:03:51 +02:00
tools Tools: add git-regtest. 2015-07-30 17:15:57 +02:00
.gitattributes Enforce Unix line endings (LF). 2015-02-04 00:10:37 +01:00
.gitignore .gitignore: make room for private stuff. 2015-08-04 13:48:30 +02:00
Doxyfile Remove LUFA. 2012-12-03 19:48:54 +01:00
LICENSE licensing- GPL-2 at the moment 2010-10-20 18:15:09 +11:00
Makefile-ARM ARM: use arduino.h for UART pinout. 2015-08-12 14:26:35 +02:00
Makefile-AVR Makefiles: add a hint on how to list these predefined macros. 2015-08-12 14:26:34 +02:00
Makefile-SIM Makefiles: add a hint on how to list these predefined macros. 2015-08-12 14:26:34 +02:00
Makefile-common SD card: commit SD_CARD_SELECT_PIN to all the board files. 2015-07-30 15:31:57 +02:00
Makefile-example Makefile-example: add shortcut targets. 2015-07-17 13:29:22 +02:00
README Makefiles: adjust comments. 2015-04-21 02:51:31 +02:00
README.sim Teach simulator to process gcode files directly 2013-12-06 19:24:58 +01:00
Teacup_Firmware.pde arduino ide: .pde must have the same name as the folder. 2011-02-27 22:08:41 +01:00
analog.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
analog.h analog.h: document and clean up. 2015-05-11 01:17:25 +02:00
arduino.h ARM: get FastIO for writing into place. 2015-08-12 14:26:34 +02:00
arduino_32U4.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_168_328p.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_644.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_1280.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_lpc1114.h ARM: use arduino.h for UART pinout. 2015-08-12 14:26:35 +02:00
arduino_usb1286.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_usb1287.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arm-lpc1114.ld ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
arm-startup_lpc11xx.s ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
calc.pl setting up new branch 2 2010-08-10 14:26:24 +10:00
clock.c clock.c: make stuff used only in clock.c static to this file. 2015-08-01 16:22:10 +02:00
clock.h clock.c: make stuff used only in clock.c static to this file. 2015-08-01 16:22:10 +02:00
config.default.h Configtool: convert template for Teensy++ 2.0. 2015-04-21 02:51:31 +02:00
config_wrapper.h config_wrapper.h: move #include "arduino.h" here. 2015-05-30 18:40:05 +02:00
configtool.default.ini Configtool: move thermistor presets into distribution file. 2015-05-20 23:31:38 +02:00
configtool.py Configtool: work around a URL-open bug on some Linuxes. 2015-07-01 16:42:38 +02:00
cpu-arm.c mendel.c: move CPU initialisation to cpu.c (cpu-avr.c). 2015-08-12 14:26:35 +02:00
cpu-avr.c mendel.c: move CPU initialisation to cpu.c (cpu-avr.c). 2015-08-12 14:26:35 +02:00
cpu.c ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
cpu.h mendel.c: move CPU initialisation to cpu.c (cpu-avr.c). 2015-08-12 14:26:35 +02:00
crc.c Replace SIMULATOR with __AVR__ in several places. 2015-07-29 21:05:38 +02:00
crc.h use CRC16 to verify heater PID settings in eeprom 2011-02-20 17:13:09 +11:00
createTemperatureLookup.py createTemperatureLookup.py: deal with precision limitation on R0. 2015-04-21 02:51:32 +02:00
dda.c Replace SIMULATOR with __AVR__ in several places. 2015-07-29 21:05:38 +02:00
dda.h Solve the pgmspace.h problem centrally. 2015-08-12 14:26:34 +02:00
dda_kinematics.c CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_kinematics.h CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_lookahead.c dda_lookahead.c: remove unused code. 2015-07-30 23:14:01 +02:00
dda_lookahead.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
dda_maths.c Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
dda_maths.h DDA: have an acceleration constant for each axis individually. 2014-08-31 19:10:14 +02:00
dda_queue.c Messages: more newlines needed. 2015-08-07 16:15:17 +02:00
dda_queue.h Remove __attribute__((hot)). 2014-03-04 19:56:13 +01:00
debug.c setting up new branch 2 2010-08-10 14:26:24 +10:00
debug.h Configtool: don't make DEBUG configuration user-visible. 2015-05-08 20:38:23 +02:00
delay.c delay.c: delay_us() and delay_ms() are now calibrated. 2015-04-28 13:05:21 +02:00
delay.h delay.h: re-add falsely removed #include. 2013-03-24 16:19:25 +01:00
extract.py Added gcode documentation and extraction tool 2011-06-03 02:02:46 +10:00
func.sh func.sh: Fix a potential infinite loop in mendel_readsym_target 2011-05-08 00:36:55 +10:00
gcode_parse.c Serial: postpone sending "ok" until a slot is free. 2015-08-04 23:03:51 +02:00
gcode_parse.h Fix typos: "whether" and whitespace. 2015-07-17 16:16:42 +02:00
gcode_process.c gcode_process.c: replace some sersendf() with serial_writestr(). 2015-08-07 16:16:05 +02:00
gcode_process.h G-code parser: move gcode_source stuff ... 2015-07-17 13:31:10 +02:00
graycode.c disable greycode by default in arduino IDE 2011-02-17 21:52:15 +11:00
heater.c Solve the pgmspace.h problem centrally. 2015-08-12 14:26:34 +02:00
heater.h heater.c/.h: get rid of heaters_all_off(). 2015-08-07 16:16:05 +02:00
home.c home.c, dda.c: consider endstops on both axis ends when homing. 2015-01-09 13:11:01 +01:00
home.h Fixed single inclusion of file. Added missing define. 2011-08-16 14:09:49 +02:00
intercom.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
intercom.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
mbed-LPC11xx.h ARM: get serial working based on MBED code. 2015-08-12 14:26:34 +02:00
mbed-core_cm0.h ARM: get rid of mbed-core_cmFunc.h and mbed-core_cmInstr.h. 2015-08-12 14:26:34 +02:00
mbed-system_LPC11xx.c ARM: silence warning in mbed-system_LPC11xx.c. 2015-08-12 14:26:34 +02:00
mbed-system_LPC11xx.h ARM: get serial working based on MBED code. 2015-08-12 14:26:34 +02:00
memory_barrier.h Replace SIMULATOR with __AVR__ in several places. 2015-07-29 21:05:38 +02:00
mendel.c mendel.c: move io_init() to pinio.c. 2015-08-12 14:26:35 +02:00
mendel_cmd Merge release-candidate-triffid branch 2011-01-07 23:09:13 +11:00
pff.c SD card: move parsing closer to the metal. 2015-07-17 13:31:03 +02:00
pff.h Add simulator SD card (and SPI, PFF) support. 2015-07-17 16:02:59 +02:00
pff_conf.h SD card: measures sizes and additionally enable FAT32 support. 2015-07-07 19:07:37 +02:00
pff_diskio.c Fix typos: "whether" and whitespace. 2015-07-17 16:16:42 +02:00
pff_diskio.h SD card: move parsing closer to the metal. 2015-07-17 13:31:03 +02:00
pinio.c mendel.c: move io_init() to pinio.c. 2015-08-12 14:26:35 +02:00
pinio.h mendel.c: move io_init() to pinio.c. 2015-08-12 14:26:35 +02:00
preprocessor_math.h preprocessor_math.h: fix errorneous comment. 2014-08-31 19:32:09 +02:00
sd.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
sd.h SD card: don't read into a buffer, parse directly instead. 2015-07-17 13:30:55 +02:00
sender-mac.sh sender-mac.sh: another minor fix. 2011-09-30 21:02:25 +02:00
sender.sh sender.sh: Allow for "ok" to be surrounded by DEBUG output. 2011-03-04 19:42:00 +11:00
serial-arm.c ARM: use arduino.h for UART pinout. 2015-08-12 14:26:35 +02:00
serial-avr.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
serial.c ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
serial.h Solve the pgmspace.h problem centrally. 2015-08-12 14:26:34 +02:00
sermsg.c sermesg.c: Add documentation tag for variable floating point. 2014-08-31 19:07:21 +02:00
sermsg.h M114 returns millimeters instead of steps 2011-04-26 14:44:17 +10:00
sersendf.c sersendf.c/.h: remove sersendf() (not sersendf_P()). 2015-08-12 14:26:34 +02:00
sersendf.h sersendf.c/.h: remove sersendf() (not sersendf_P()). 2015-08-12 14:26:34 +02:00
simulator.h Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
spi.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
spi.h Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
temp.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
temp.h temp.h: remove indirection temp_tick(). 2015-04-21 02:51:31 +02:00
timer.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
timer.h timer.h: remove some obsolete stuff, replace char with uint8_t. 2015-08-03 12:11:19 +02:00
usb_serial.c Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
usb_serial.h Import USB Serial from http://www.pjrc.com/teensy/usb_serial.html 2012-11-08 16:36:48 +01:00
watchdog.c According to avr-libc documentation, ISR() handles SREG its self. 2013-10-27 20:01:51 +01:00
watchdog.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00

README 

##############################################################################
#                                                                            #
# Teacup - lean and efficient firmware for RepRap printers                   #
#                                                                            #
# by Triffid Hunter, Traumflug, jakepoz, many others.                        #
#                                                                            #
##############################################################################

For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation

For documentation, see
http://reprap.org/wiki/Teacup_Firmware


##############################################################################
#                                                                            #
# This firmware is Copyright (c) ...                                         #
#   2009 - 2010 Michael Moon aka Triffid_Hunter                              #
#   2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de>                  #
#                                                                            #
# This program is free software; you can redistribute it and/or modify       #
# it under the terms of the GNU General Public License as published by       #
# the Free Software Foundation; either version 2 of the License, or          #
# (at your option) any later version.                                        #
#                                                                            #
# This program is distributed in the hope that it will be useful,            #
# but WITHOUT ANY WARRANTY; without even the implied warranty of             #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              #
# GNU General Public License for more details.                               #
#                                                                            #
# You should have received a copy of the GNU General Public License          #
# along with this program; if not, write to the Free Software                #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA #
#                                                                            #
##############################################################################