josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Teacup_Firmware/config
History
Wurstnase 57afef9fdd Add Z late enable. 
Until this commit, the Z axis is disabled after each move and
only enabled when the Z axis will move. Now you can enable this
as a feature. Some printer axes are too heavy or have a high
pitch which are not self locking. In that case simply do nothing.
It's now off by default.
 		2016-03-27 20:14:04 +02:00
..
board.3drag.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.cnc-shield-v3.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.gen3.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.gen6.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.gen7-arm.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.gen7-v1.1-v1.3.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.gen7-v1.4.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.melzi.h Add configuration for a Melzi board. 2015-09-14 15:51:02 +02:00
board.nanoheart-v1.0.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.ramps-v1.2.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.ramps-v1.3.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.rumba.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.sanguinololu-v1.1.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.sanguinololu-v1.2.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.sanguish.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.sinaptec-at328-02.h Add a board config for the SinapTec AT328-02. 2016-02-28 15:57:54 +01:00
board.teensy++-v2.0.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
board.teensy-v2.0.h ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
config-syntax.txt Configtool: add the ability to build and upload. 2015-04-21 02:11:01 +02:00
printer.mendel.h Add Z late enable. 2016-03-27 20:14:04 +02:00
printer.mendel90.h Add configuration for a Mendel90 printer. 2015-09-14 17:20:07 +02:00
printer.wolfstrap.h Add Z late enable. 2016-03-27 20:14:04 +02:00