josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,317 Commits 1 Branch 0 Tags 6.3 MiB
Go to file
Phil Hord 6ef35a11f2 Add test for "no endstops defined" build 
This configuration used to fail.  Now it's fixed.  Test the
configuration to ensure it doesn't break again in the future.
 		2015-11-18 14:53:12 -05:00
attic SD card: store sample code for the hardware layer. 2015-07-05 23:32:48 +02:00
config Add configuration for a Mendel90 printer. 2015-09-14 17:20:07 +02:00
configtool ARM, AVR: support inverted heater pin signals. 2015-08-13 17:12:10 +02:00
extruder pinio.h: remove TOGGLE(), GET_INPUT(), GET_OUTPUT() macros. 2015-08-12 14:26:35 +02:00
research Add gnuplot script to explore simulator output 2013-12-06 19:24:58 +01:00
simulator Introduce #ifdef SPI. 2015-08-13 17:12:12 +02:00
testcases Add test for "no endstops defined" build 2015-11-18 14:53:12 -05:00
tools Git tools: a few minor improvements. 2015-09-14 15:24:03 +02:00
.gitattributes Enforce Unix line endings (LF). 2015-02-04 00:10:37 +01:00
.gitignore .gitignore: make room for private stuff. 2015-08-04 13:48:30 +02:00
Doxyfile Remove LUFA. 2012-12-03 19:48:54 +01:00
LICENSE licensing- GPL-2 at the moment 2010-10-20 18:15:09 +11:00
Makefile-ARM ARM: generic port is done, all printing relevant stuff works. 2015-08-13 17:12:13 +02:00
Makefile-AVR Makefiles: add a hint on how to list these predefined macros. 2015-08-12 14:26:34 +02:00
Makefile-SIM Makefiles: add a hint on how to list these predefined macros. 2015-08-12 14:26:34 +02:00
Makefile-common Add test for "no endstops defined" build 2015-11-18 14:53:12 -05:00
Makefile-example Makefile-example: add shortcut targets. 2015-07-17 13:29:22 +02:00
README Makefiles: adjust comments. 2015-04-21 02:51:31 +02:00
README.sim Teach simulator to process gcode files directly 2013-12-06 19:24:58 +01:00
Teacup_Firmware.pde arduino ide: .pde must have the same name as the folder. 2011-02-27 22:08:41 +01:00
analog-arm.c analog-arm.c: read not by ADC channel number, but by Teacup number. 2015-08-12 14:26:37 +02:00
analog-avr.c analog-avr.c: take the opportunity to rewrite analog_read() here. 2015-08-12 14:26:37 +02:00
analog.c analog-arm.c: read not by ADC channel number, but by Teacup number. 2015-08-12 14:26:37 +02:00
analog.h ARM: split out analog-avr.c from analog.c. 2015-08-12 14:26:37 +02:00
arduino.h ARM: get FastIO for writing into place. 2015-08-12 14:26:34 +02:00
arduino_32U4.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_168_328p.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_644.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_1280.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_lpc1114.h ARM: allow non-PWM pins as heater output. 2015-08-13 16:41:33 +02:00
arduino_usb1286.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
arduino_usb1287.h SD card: establish spi.c/.h and sd.c/.h and get SPI running. 2015-07-05 23:32:46 +02:00
calc.pl setting up new branch 2 2010-08-10 14:26:24 +10:00
clock.c ARM: implement heater-arm.c partially. 2015-08-13 16:41:33 +02:00
clock.h clock.c: make stuff used only in clock.c static to this file. 2015-08-01 16:22:10 +02:00
cmsis-core_cm0.h ARM: prettify cmsis-core_cm0.h. 2015-08-12 14:26:36 +02:00
cmsis-lpc11xx.h ARM: rename mbed-system_LPC11xx.c/.h to cmsis-system_lpc11xx.c/.h. 2015-08-12 14:26:36 +02:00
cmsis-lpc1114.ld ARM: prettify current cmsis- files. 2015-08-12 14:26:35 +02:00
cmsis-startup_lpc11xx.s ARM: prettify current cmsis- files. 2015-08-12 14:26:35 +02:00
cmsis-system_lpc11xx.c ARM: prettify cmsis-system_lpc11xx.c/.h. 2015-08-12 14:26:36 +02:00
cmsis-system_lpc11xx.h ARM: prettify cmsis-system_lpc11xx.c/.h. 2015-08-12 14:26:36 +02:00
config.default.h Configtool: convert template for Teensy++ 2.0. 2015-04-21 02:51:31 +02:00
config_wrapper.h Introduce #ifdef SPI. 2015-08-13 17:12:12 +02:00
configtool.default.ini Configtool: move thermistor presets into distribution file. 2015-05-20 23:31:38 +02:00
configtool.py Configtool: work around a URL-open bug on some Linuxes. 2015-07-01 16:42:38 +02:00
cpu-arm.c ARM: take care of system startup status. 2015-08-13 17:12:13 +02:00
cpu-avr.c Introduce #ifdef SPI. 2015-08-13 17:12:12 +02:00
cpu.c ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
cpu.h ARM: introduce sei() and cli(). 2015-08-12 14:26:36 +02:00
crc.c Replace SIMULATOR with __AVR__ in several places. 2015-07-29 21:05:38 +02:00
crc.h use CRC16 to verify heater PID settings in eeprom 2011-02-20 17:13:09 +11:00
createTemperatureLookup.py createTemperatureLookup.py: deal with precision limitation on R0. 2015-04-21 02:51:32 +02:00
dda.c Move interrupt busy detection from dda_clock() to clock tick ISR. 2015-08-12 14:26:37 +02:00
dda.h Solve the pgmspace.h problem centrally. 2015-08-12 14:26:34 +02:00
dda_kinematics.c CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_kinematics.h CoreXY, dda_kinematics.c/.h: introduce KINEMATICS_COREXY. 2014-12-26 19:41:37 +01:00
dda_lookahead.c ARM: get dda_maths.c, dda_kinematics.c and dda.c in. 2015-08-12 14:26:37 +02:00
dda_lookahead.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
dda_maths.c Rename all these new PROGMEM variables to end in _P. 2014-08-31 19:05:25 +02:00
dda_maths.h DDA: have an acceleration constant for each axis individually. 2014-08-31 19:10:14 +02:00
dda_queue.c MOVEBUFFER_SIZE really does not have to be power of 2 2015-09-14 15:17:20 +02:00
dda_queue.h Remove __attribute__((hot)). 2014-03-04 19:56:13 +01:00
debug.c setting up new branch 2 2010-08-10 14:26:24 +10:00
debug.h Configtool: don't make DEBUG configuration user-visible. 2015-05-08 20:38:23 +02:00
delay-arm.c ARM: rename mbed-LPC11xx.h to cmsis-lpc11xx.h. 2015-08-12 14:26:36 +02:00
delay-avr.c ARM: split out architecture specific parts for delay.c 2015-08-12 14:26:35 +02:00
delay.c ARM: get delay.c in. 2015-08-12 14:26:35 +02:00
delay.h delay.h: re-add falsely removed #include. 2013-03-24 16:19:25 +01:00
extract.py Added gcode documentation and extraction tool 2011-06-03 02:02:46 +10:00
func.sh func.sh: Fix a potential infinite loop in mendel_readsym_target 2011-05-08 00:36:55 +10:00
gcode_parse.c ARM: bring in gcode_process.c. 2015-08-12 14:26:36 +02:00
gcode_parse.h gcode_parse.h: order variables reasonably in groups of 4 bytes. 2015-08-12 14:26:36 +02:00
gcode_process.c Don't declare variables which never get used 2015-11-18 14:53:12 -05:00
gcode_process.h G-code parser: move gcode_source stuff ... 2015-07-17 13:31:10 +02:00
graycode.c disable greycode by default in arduino IDE 2011-02-17 21:52:15 +11:00
heater-arm.c ARM: enable temperature control. 2015-08-13 17:12:12 +02:00
heater-avr.c ARM: enable temperature control. 2015-08-13 17:12:12 +02:00
heater.c ARM: enable temperature control. 2015-08-13 17:12:12 +02:00
heater.h ARM: enable temperature control. 2015-08-13 17:12:12 +02:00
home.c home.c, dda.c: consider endstops on both axis ends when homing. 2015-01-09 13:11:01 +01:00
home.h Fixed single inclusion of file. Added missing define. 2011-08-16 14:09:49 +02:00
intercom.c ARM: introduce sei() and cli(). 2015-08-12 14:26:36 +02:00
intercom.h Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
memory_barrier.h ARM: port memory_barrier.h. 2015-08-12 14:26:36 +02:00
mendel.c ARM: last not least, enable CANNED_CYCLE. 2015-08-13 17:12:13 +02:00
mendel_cmd Merge release-candidate-triffid branch 2011-01-07 23:09:13 +11:00
pff.c SD card: move parsing closer to the metal. 2015-07-17 13:31:03 +02:00
pff.h Add simulator SD card (and SPI, PFF) support. 2015-07-17 16:02:59 +02:00
pff_conf.h SD card: measures sizes and additionally enable FAT32 support. 2015-07-07 19:07:37 +02:00
pff_diskio.c Fix typos: "whether" and whitespace. 2015-07-17 16:16:42 +02:00
pff_diskio.h SD card: move parsing closer to the metal. 2015-07-17 13:31:03 +02:00
pinio.c ARM: bring in pinio.c. 2015-08-12 14:26:36 +02:00
pinio.h mendel.c: move io_init() to pinio.c. 2015-08-12 14:26:35 +02:00
preprocessor_math.h preprocessor_math.h: fix errorneous comment. 2014-08-31 19:32:09 +02:00
sd.c heater.c, sd.c: apply the changed order of SET_OUTPUT() here, too. 2015-08-12 14:26:36 +02:00
sd.h ARM: get spi.c, pff.c and pff_diskio.c (SD card handling) in. 2015-08-13 17:12:13 +02:00
sender-mac.sh sender-mac.sh: another minor fix. 2011-09-30 21:02:25 +02:00
sender.sh sender.sh: Allow for "ok" to be surrounded by DEBUG output. 2011-03-04 19:42:00 +11:00
serial-arm.c ARM: rename mbed-LPC11xx.h to cmsis-lpc11xx.h. 2015-08-12 14:26:36 +02:00
serial-avr.c Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
serial.c ARM: get a minimum amount of Teacup compiled for ARM. 2015-08-12 14:26:33 +02:00
serial.h Solve the pgmspace.h problem centrally. 2015-08-12 14:26:34 +02:00
sermsg.c sermesg.c: Add documentation tag for variable floating point. 2014-08-31 19:07:21 +02:00
sermsg.h M114 returns millimeters instead of steps 2011-04-26 14:44:17 +10:00
sersendf.c sersendf.c/.h: remove sersendf() (not sersendf_P()). 2015-08-12 14:26:34 +02:00
sersendf.h sersendf.c/.h: remove sersendf() (not sersendf_P()). 2015-08-12 14:26:34 +02:00
simulator.h Move pin I/O macros from arduino.h to pinio.h. 2015-08-12 14:26:34 +02:00
spi.c ARM: get spi.c, pff.c and pff_diskio.c (SD card handling) in. 2015-08-13 17:12:13 +02:00
spi.h ARM: get spi.c, pff.c and pff_diskio.c (SD card handling) in. 2015-08-13 17:12:13 +02:00
temp.c ARM: get spi.c, pff.c and pff_diskio.c (SD card handling) in. 2015-08-13 17:12:13 +02:00
temp.h temp.h: remove indirection temp_tick(). 2015-04-21 02:51:31 +02:00
timer-arm.c Step timer: reset timer after pauses instead of doing a guess. 2015-08-12 14:26:37 +02:00
timer-avr.c Step timer: reset timer after pauses instead of doing a guess. 2015-08-12 14:26:37 +02:00
timer.c ARM: split timer.c into platform specific files. 2015-08-12 14:26:36 +02:00
timer.h Step timer: reset timer after pauses instead of doing a guess. 2015-08-12 14:26:37 +02:00
usb_serial.c Add config.h wrapper to simplify test automation 2014-03-04 19:56:23 +01:00
usb_serial.h ARM: get usb_serial.c in. 2015-08-13 17:12:13 +02:00
watchdog.c According to avr-libc documentation, ISR() handles SREG its self. 2013-10-27 20:01:51 +01:00
watchdog.h ARM: get watchdog.c in. 2015-08-13 17:12:13 +02:00

README 

##############################################################################
#                                                                            #
# Teacup - lean and efficient firmware for RepRap printers                   #
#                                                                            #
# by Triffid Hunter, Traumflug, jakepoz, many others.                        #
#                                                                            #
##############################################################################

For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation

For documentation, see
http://reprap.org/wiki/Teacup_Firmware


##############################################################################
#                                                                            #
# This firmware is Copyright (c) ...                                         #
#   2009 - 2010 Michael Moon aka Triffid_Hunter                              #
#   2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de>                  #
#                                                                            #
# This program is free software; you can redistribute it and/or modify       #
# it under the terms of the GNU General Public License as published by       #
# the Free Software Foundation; either version 2 of the License, or          #
# (at your option) any later version.                                        #
#                                                                            #
# This program is distributed in the hope that it will be useful,            #
# but WITHOUT ANY WARRANTY; without even the implied warranty of             #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              #
# GNU General Public License for more details.                               #
#                                                                            #
# You should have received a copy of the GNU General Public License          #
# along with this program; if not, write to the Free Software                #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA #
#                                                                            #
##############################################################################