Formerly we took efforts to read only small chunks into a
(small) buffer, just to read this buffer byte by byte yet
again for parsing. It's more efficient and requires less
code to parse the character at read time directly. This
way we can read in chunks of exactly one line, making the
buffer obsolete.
First step is to implement this in mendel.c and in sd.c/.h.
This gets rid of the buffer already.
Very inefficient in pff.c and pff_diskio.c so far, more
than 40 minutes / less than 500 bytes/s for reading this
1 MB comments file. Reason is, for every single byte a
whole sector is read. Nevertheless, this attempt appears
to be on the right track.
Binary is 156 bytes smaller, 16 bytes less RAM:
ATmega... '168 '328(P) '644(P) '1280
FLASH: 22052 bytes 153.82% 71.78% 34.73% 17.09%
RAM: 1331 bytes 129.98% 64.99% 32.50% 16.25%
EEPROM: 32 bytes 3.12% 1.56% 1.56% 0.78%
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, many others. #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
75df5e3a0a