Performance for ACCELERATION_RAMPING unchanged:
$ cd testcases
$ ./run-in-simulavr.sh short-moves.gcode smooth-curves.gcode triangle-odd.gcode
[...]
SIZES ATmega... '168 '328(P) '644(P) '1280
FLASH : 20518 bytes 144% 67% 33% 16%
RAM : 2188 bytes 214% 107% 54% 27%
EEPROM : 32 bytes 4% 2% 2% 1%
short-moves.gcode statistics:
LED on occurences: 838.
LED on time minimum: 302 clock cycles.
LED on time maximum: 713 clock cycles.
LED on time average: 308.72 clock cycles.
smooth-curves.gcode statistics:
LED on occurences: 8585.
LED on time minimum: 307 clock cycles.
LED on time maximum: 710 clock cycles.
LED on time average: 358.051 clock cycles.
triangle-odd.gcode statistics:
LED on occurences: 1636.
LED on time minimum: 302 clock cycles.
LED on time maximum: 708 clock cycles.
LED on time average: 330.322 clock cycles.
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, many others. #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
7dda91ab56