Phil Hord 77d8583cca Add dynamic 3-point bed-leveling support ... Adds G29 commands to register bed level points. When three points are registered, the plane of the bed is calculated and dynamic bed leveling takes effect. Add a warning if bed-leveling is enabled when MAX_JERK_Z is zero. In this case lookahead will always fail when bed-leveling is active since the Z-axis is not allowed to move during lookahead.		2018-08-20 10:38:10 -07:00
..
board.3drag.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.cnc-shield-v3-nucleo.h	check_configtool.sh: don't ignore whitespace entirely.	2017-12-31 17:26:09 +01:00
board.cnc-shield-v3.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.gen3.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.gen6.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.gen7-arm.h	heater: add max_pwm and software pwm also for stm32	2017-03-21 17:36:14 +01:00
board.gen7-v1.1-v1.3.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.gen7-v1.4.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.melzi.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.nanoheart-v1.0.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.pcbscriber.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.ramps-v1.2.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.ramps-v1.3.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.rumba.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.sanguinololu-v1.1.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.sanguinololu-v1.2.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.sanguish.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.sinaptec-at328-02.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.teensy++-v2.0.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.teensy-v2.0.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
board.tronxy.h	configtool: add FORCE_SOFTWARE_PWM to configtool	2017-03-21 15:04:26 +01:00
config-syntax.txt	Configtool: make KINEMATICS a set of booleans, too.	2016-04-20 22:02:07 +02:00
printer.mendel.h	Add dynamic 3-point bed-leveling support	2018-08-20 10:38:10 -07:00
printer.mendel90.h	Add dynamic 3-point bed-leveling support	2018-08-20 10:38:10 -07:00
printer.pcbscriber.h	Add dynamic 3-point bed-leveling support	2018-08-20 10:38:10 -07:00
printer.tronxy.h	Add dynamic 3-point bed-leveling support	2018-08-20 10:38:10 -07:00
printer.wolfstrap.h	Add dynamic 3-point bed-leveling support	2018-08-20 10:38:10 -07:00