Teacup_Firmware/mendel/mendel.c

#include	<stddef.h>
#include	<stdint.h>
#include	<string.h>

#include	<avr/io.h>
#include	<avr/interrupt.h>

#include	"machine.h"

#include	"serial.h"
#include	"dda_queue.h"
#include	"dda.h"
#include	"gcode.h"
#include	"timer.h"
#include	"clock.h"
#include	"temp.h"
#include	"sermsg.h"

#ifndef	DEBUG
#define	DEBUG 0
#endif

inline void io_init(void) {
	WRITE(X_STEP_PIN, 0);	SET_OUTPUT(X_STEP_PIN);
	WRITE(X_DIR_PIN,  0);	SET_OUTPUT(X_DIR_PIN);
	WRITE(X_MIN_PIN,  1);	SET_INPUT(X_MIN_PIN);

	WRITE(Y_STEP_PIN, 0);	SET_OUTPUT(Y_STEP_PIN);
	WRITE(Y_DIR_PIN,  0);	SET_OUTPUT(Y_DIR_PIN);
	WRITE(Y_MIN_PIN,  1);	SET_INPUT(Y_MIN_PIN);

	WRITE(Z_STEP_PIN, 0);	SET_OUTPUT(Z_STEP_PIN);
	WRITE(Z_DIR_PIN,  0);	SET_OUTPUT(Z_DIR_PIN);
	WRITE(Z_MIN_PIN,  1);	SET_INPUT(Z_MIN_PIN);

	WRITE(E_STEP_PIN, 0);	SET_OUTPUT(E_STEP_PIN);
	WRITE(E_DIR_PIN,  0);	SET_OUTPUT(E_DIR_PIN);

	// setup PWM timer: phase-correct PWM, no prescaler, no outputs enabled yet
	TCCR0A = MASK(WGM00);
	TCCR0B = MASK(CS00);
	TIMSK0 = 0;

	#ifdef	HEATER_PIN
		disable_heater();
	#endif

	#ifdef	FAN_PIN
		disable_fan();
	#endif

	#ifdef	STEPPER_ENABLE_PIN
		disable_steppers();
	#endif

	WRITE(SCK, 1);				SET_OUTPUT(SCK);
	WRITE(MISO, 1);				SET_INPUT(MISO);
	WRITE(SS, 0);					SET_OUTPUT(SS);
}

inline void init(void) {
	// set up serial
	serial_init();

	// set up inputs and outputs
	io_init();

	// set up timers
	setupTimerInterrupt();

	// set up clock
	clock_setup();

	// set up variables

	// slow default
	current_position.F = FEEDRATE_SLOW_Z;
	memcpy(&startpoint, &current_position, sizeof(TARGET));
	memcpy(&(next_target.target), &current_position, sizeof(TARGET));

	// enable interrupts
	sei();

	// say hi to host
	serial_writestr_P(PSTR("Start\n"));

	// start queue
	//enableTimerInterrupt();
}

void clock_250ms() {
	static uint8_t report = 0;

	temp_tick();

	if (steptimeout > (30 * 4))
		disable_steppers();
	else
		steptimeout++;

	report++;
	if (report == 4) {
		report = 0;

		if (DEBUG) {
			// current move
			serial_writestr_P(PSTR("DDA: f#"));
			serwrite_int32(movebuffer[mb_head].f_counter);
			serial_writechar('/');
			// serwrite_uint16(movebuffer[mb_head].f_scale);
			// serial_writechar('/');
			serwrite_int16(movebuffer[mb_head].f_delta);
			serial_writechar('\n');

			// current position
			serial_writestr_P(PSTR("Pos: "));
			serwrite_int32(current_position.X);
			serial_writechar(',');
			serwrite_int32(current_position.Y);
			serial_writechar(',');
			serwrite_int32(current_position.Z);
			serial_writechar(',');
			serwrite_int32(current_position.E);
			serial_writechar(',');
			serwrite_uint32(current_position.F);
			serial_writechar('\n');

			// target position
			serial_writestr_P(PSTR("Dst: "));
			serwrite_int32(movebuffer[mb_tail].endpoint.X);
			serial_writechar(',');
			serwrite_int32(movebuffer[mb_tail].endpoint.Y);
			serial_writechar(',');
			serwrite_int32(movebuffer[mb_tail].endpoint.Z);
			serial_writechar(',');
			serwrite_int32(movebuffer[mb_tail].endpoint.E);
			serial_writechar(',');
			serwrite_uint32(movebuffer[mb_tail].endpoint.F);
			serial_writechar('\n');

			// Queue
			print_queue();
		}

		// temperature
		temp_print();
	}
}

int main (void)
{
	init();

	// main loop
	for (;;)
	{
		// if queue is full, no point in reading chars- host will just have to wait
		if (serial_rxchars() && !queue_full()) {
			uint8_t c = serial_popchar();
			scan_char(c);
		}

		ifclock(CLOCK_FLAG_250MS) {
			clock_250ms();
		}

// 		ifclock(CLOCK_FLAG_250MS_TEMPCHECK) {
// 			temp_tick();
// 		}
//
// 		ifclock(CLOCK_FLAG_250MS_STEPTIMEOUT) {
// 			if (steptimeout > (30 * 4))
// 				disable_steppers();
// 			else
// 				steptimeout++;
// 		}
//
// 		ifclock(CLOCK_FLAG_250MS_REPORT) {
// 			report++;
// 			if (report == 4) {
// 				report = 0;
//
// 				if (DEBUG) {
// 					// current move
// 					serial_writestr_P(PSTR("DDA: f#"));
// 					serwrite_int32(movebuffer[mb_head].f_counter);
// 					serial_writechar('/');
// // 					serwrite_uint16(movebuffer[mb_head].f_scale);
// // 					serial_writechar('/');
// 					serwrite_int16(movebuffer[mb_head].f_delta);
// 					serial_writechar('\n');
//
// 					// current position
// 					serial_writestr_P(PSTR("Pos: "));
// 					serwrite_int32(current_position.X);
// 					serial_writechar(',');
// 					serwrite_int32(current_position.Y);
// 					serial_writechar(',');
// 					serwrite_int32(current_position.Z);
// 					serial_writechar(',');
// 					serwrite_int32(current_position.E);
// 					serial_writechar(',');
// 					serwrite_uint32(current_position.F);
// 					serial_writechar('\n');
//
// 					// target position
// 					serial_writestr_P(PSTR("Dst: "));
// 					serwrite_int32(movebuffer[mb_tail].endpoint.X);
// 					serial_writechar(',');
// 					serwrite_int32(movebuffer[mb_tail].endpoint.Y);
// 					serial_writechar(',');
// 					serwrite_int32(movebuffer[mb_tail].endpoint.Z);
// 					serial_writechar(',');
// 					serwrite_int32(movebuffer[mb_tail].endpoint.E);
// 					serial_writechar(',');
// 					serwrite_uint32(movebuffer[mb_tail].endpoint.F);
// 					serial_writechar('\n');
// 				}
//
// 				// Queue
// 				print_queue();
//
// 				// temperature
// 				temp_print();
// 			}
// 		}
	}
}