42 lines
1.8 KiB
C
42 lines
1.8 KiB
C
// default thermistor lookup table
|
|
// Thermistor lookup table, generated with --num-temps=50 and trimmed in lower temperature ranges.
|
|
// You may be able to improve the accuracy of this table in various ways.
|
|
// 1. Measure the actual resistance of the resistor. It's "nominally" 4.7K, but that's ± 5%.
|
|
// 2. Measure the actual beta of your thermistor:http://reprap.org/wiki/MeasuringThermistorBeta
|
|
// 3. Generate more table entries than you need, then trim down the ones in uninteresting ranges. (done)
|
|
// In either case you'll have to regenerate this table, which requires python, which is difficult to install on windows.
|
|
// Since you'll have to do some testing to determine the correct temperature for your application anyway, you
|
|
// may decide that the effort isn't worth it. Who cares if it's reporting the "right" temperature as long as it's
|
|
// keeping the temperature steady enough to print, right?
|
|
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
|
|
// r0: 100000
|
|
// t0: 25
|
|
// r1: 0
|
|
// r2: 4700
|
|
// beta: 4066
|
|
// max adc: 1023
|
|
#define NUMTEMPS 20
|
|
// {ADC, temp*4 }, // temp
|
|
uint16_t temptable[NUMTEMPS][2] PROGMEM = {
|
|
{1, 3364}, // 841.027617469 C
|
|
{21, 1329}, // 332.486789769 C
|
|
{41, 1104}, // 276.102666373 C
|
|
{61, 987}, // 246.756060004 C
|
|
{81, 909}, // 227.268080588 C
|
|
{101, 851}, // 212.78847342 C
|
|
{121, 805}, // 201.30176775 C
|
|
{141, 767}, // 191.787692666 C
|
|
{161, 734}, // 183.662212795 C
|
|
{181, 706}, // 176.561442671 C
|
|
{201, 680}, // 170.244089549 C
|
|
{221, 658}, // 164.542298163 C
|
|
{241, 637}, // 159.33475843 C
|
|
{321, 567}, // 141.921298995 C
|
|
{381, 524}, // 131.166509425 C
|
|
{581, 406}, // 101.561865389 C
|
|
{781, 291}, // 72.9710018071 C
|
|
{881, 219}, // 54.8051659223 C
|
|
{981, 93}, // 23.4825243529 C
|
|
{1010, 1} // 0.498606463441 C
|
|
};
|