424 lines
9.9 KiB
C
424 lines
9.9 KiB
C
#include "dda.h"
|
|
|
|
#include <string.h>
|
|
|
|
#include "timer.h"
|
|
#include "serial.h"
|
|
#include "sermsg.h"
|
|
|
|
#ifndef ABS
|
|
#define ABS(v) (((v) >= 0)?(v):(-(v)))
|
|
#endif
|
|
|
|
#ifndef ABSDELTA
|
|
#define ABSDELTA(a, b) (((a) >= (b))?((a) - (b)):((b) - (a)))
|
|
#endif
|
|
|
|
/*
|
|
move queue
|
|
*/
|
|
|
|
uint8_t mb_head = 0;
|
|
uint8_t mb_tail = 0;
|
|
DDA movebuffer[MOVEBUFFER_SIZE];
|
|
|
|
/*
|
|
position tracking
|
|
*/
|
|
|
|
TARGET startpoint = { 0, 0, 0, 0, FEEDRATE_SLOW_Z };
|
|
TARGET current_position = { 0, 0, 0, 0, FEEDRATE_SLOW_Z };
|
|
|
|
uint8_t queue_full() {
|
|
if (mb_tail == 0)
|
|
return mb_head == (MOVEBUFFER_SIZE - 1);
|
|
else
|
|
return mb_head == (mb_tail - 1);
|
|
}
|
|
|
|
uint8_t queue_empty() {
|
|
return (mb_tail == mb_head) && !movebuffer[mb_tail].live;
|
|
}
|
|
|
|
void enqueue(TARGET *t) {
|
|
while (queue_full())
|
|
delay(WAITING_DELAY);
|
|
|
|
uint8_t h = mb_head;
|
|
h++;
|
|
if (h == MOVEBUFFER_SIZE)
|
|
h = 0;
|
|
dda_create(t, &movebuffer[h]);
|
|
mb_head = h;
|
|
}
|
|
|
|
void next_move() {
|
|
if (queue_empty()) {
|
|
// queue is empty
|
|
disable_steppers();
|
|
setTimer(DEFAULT_TICK);
|
|
// disableTimerInterrupt();
|
|
}
|
|
else {
|
|
uint8_t t = mb_tail;
|
|
t++;
|
|
if (t == MOVEBUFFER_SIZE)
|
|
t = 0;
|
|
dda_start(&movebuffer[t]);
|
|
mb_tail = t;
|
|
}
|
|
}
|
|
|
|
/*
|
|
utility functions
|
|
*/
|
|
|
|
// courtesy of http://www.oroboro.com/rafael/docserv.php/index/programming/article/distance
|
|
uint32_t approx_distance( uint32_t dx, uint32_t dy )
|
|
{
|
|
uint32_t min, max, approx;
|
|
|
|
if ( dx < dy )
|
|
{
|
|
min = dx;
|
|
max = dy;
|
|
} else {
|
|
min = dy;
|
|
max = dx;
|
|
}
|
|
|
|
approx = ( max * 1007 ) + ( min * 441 );
|
|
if ( max < ( min << 4 ))
|
|
approx -= ( max * 40 );
|
|
|
|
// add 512 for proper rounding
|
|
return (( approx + 512 ) >> 10 );
|
|
}
|
|
|
|
// courtesy of http://www.oroboro.com/rafael/docserv.php/index/programming/article/distance
|
|
uint32_t approx_distance_3( uint32_t dx, uint32_t dy, uint32_t dz )
|
|
{
|
|
uint32_t min, med, max, approx;
|
|
|
|
if ( dx < dy )
|
|
{
|
|
min = dy;
|
|
med = dx;
|
|
} else {
|
|
min = dx;
|
|
med = dy;
|
|
}
|
|
|
|
if ( dz < min )
|
|
{
|
|
max = med;
|
|
med = min;
|
|
min = dz;
|
|
} else if ( dz < med ) {
|
|
max = med;
|
|
med = dz;
|
|
} else {
|
|
max = dz;
|
|
}
|
|
|
|
approx = ( max * 860 ) + ( med * 851 ) + ( min * 520 );
|
|
if ( max < ( med << 1 )) approx -= ( max * 294 );
|
|
if ( max < ( min << 2 )) approx -= ( max * 113 );
|
|
if ( med < ( min << 2 )) approx -= ( med * 40 );
|
|
|
|
// add 512 for proper rounding
|
|
return (( approx + 512 ) >> 10 );
|
|
}
|
|
|
|
uint32_t abs32(int32_t v) {
|
|
if (v < 0)
|
|
return (uint32_t) (-v);
|
|
return (uint32_t) (v);
|
|
}
|
|
|
|
/*
|
|
CREATE
|
|
*/
|
|
|
|
void dda_create(TARGET *target, DDA *dda) {
|
|
uint32_t distance;
|
|
|
|
serial_writestr_P(PSTR("\n{DDA_CREATE: ["));
|
|
|
|
// we end at the passed target
|
|
memcpy(&(dda->endpoint), target, sizeof(TARGET));
|
|
|
|
dda->x_delta = abs32(dda->endpoint.X - startpoint.X);
|
|
dda->y_delta = abs32(dda->endpoint.Y - startpoint.Y);
|
|
dda->z_delta = abs32(dda->endpoint.Z - startpoint.Z);
|
|
dda->e_delta = abs32(dda->endpoint.E - startpoint.E);
|
|
dda->f_delta = abs32(dda->endpoint.F - startpoint.F);
|
|
|
|
serwrite_uint32(dda->x_delta); serial_writechar(',');
|
|
serwrite_uint32(dda->y_delta); serial_writechar(',');
|
|
serwrite_uint32(dda->z_delta); serial_writechar(',');
|
|
serwrite_uint32(dda->e_delta); serial_writechar(',');
|
|
serwrite_uint32(dda->f_delta); serial_writestr_P(PSTR("] ["));
|
|
|
|
dda->total_steps = dda->x_delta;
|
|
if (dda->y_delta > dda->total_steps)
|
|
dda->total_steps = dda->y_delta;
|
|
if (dda->z_delta > dda->total_steps)
|
|
dda->total_steps = dda->z_delta;
|
|
|
|
if (dda->e_delta > dda->total_steps)
|
|
dda->total_steps = dda->e_delta;
|
|
|
|
if (dda->total_steps == 0)
|
|
dda->nullmove = 1;
|
|
|
|
serwrite_uint32(dda->total_steps); serial_writechar(',');
|
|
|
|
if (dda->f_delta > dda->total_steps) {
|
|
dda->f_scale = dda->f_delta / dda->total_steps;
|
|
if (dda->f_scale > 3) {
|
|
dda->f_delta = dda->total_steps;
|
|
}
|
|
else {
|
|
dda->f_scale = 1;
|
|
dda->total_steps = dda->f_delta;
|
|
}
|
|
}
|
|
else {
|
|
dda->f_scale = 1;
|
|
}
|
|
|
|
serwrite_uint32(dda->total_steps); serial_writechar(',');
|
|
|
|
dda->x_direction = (dda->endpoint.X >= startpoint.X)?1:0;
|
|
dda->y_direction = (dda->endpoint.Y >= startpoint.Y)?1:0;
|
|
dda->z_direction = (dda->endpoint.Z >= startpoint.Z)?1:0;
|
|
dda->e_direction = (dda->endpoint.E >= startpoint.E)?1:0;
|
|
dda->f_direction = (dda->endpoint.F >= startpoint.F)?1:0;
|
|
|
|
dda->x_counter = dda->y_counter = dda->z_counter = dda->e_counter = dda->f_counter =
|
|
-(dda->total_steps >> 1);
|
|
|
|
// since it's unusual to combine X, Y and Z changes in a single move on reprap, check if we can use simpler approximations before trying the full 3d approximation.
|
|
if (dda->z_delta == 0)
|
|
distance = approx_distance(dda->x_delta * 1000, dda->y_delta * 1000) / STEPS_PER_MM_X;
|
|
else if (dda->x_delta == 0 && dda->y_delta == 0)
|
|
distance = dda->z_delta * 1000 / STEPS_PER_MM_Z;
|
|
else
|
|
distance = approx_distance_3(dda->x_delta * 1000 * STEPS_PER_MM_Z / STEPS_PER_MM_X, dda->y_delta * 1000 * STEPS_PER_MM_Z / STEPS_PER_MM_Y, dda->z_delta * 1000) / STEPS_PER_MM_Z;
|
|
|
|
if (distance < 2)
|
|
distance = dda->e_delta * 1000 / STEPS_PER_MM_E;
|
|
if (distance < 2)
|
|
distance = dda->f_delta;
|
|
|
|
// pre-calculate move speed in millimeter microseconds per step minute for less math in interrupt context
|
|
// mm (distance) * 1000 us/ms * 60000000 us/min / step (total_steps) = mm.us per step.min
|
|
// so in the interrupt we must simply calculate
|
|
// mm.us per step.min / mm per min (F) = us per step
|
|
if (dda->total_steps > 0)
|
|
dda->move_duration = distance * 60000 / dda->total_steps;
|
|
else
|
|
dda->move_duration = 0;
|
|
|
|
serwrite_uint32(dda->move_duration); serial_writestr_P(PSTR("] }\n"));
|
|
|
|
// next dda starts where we finish
|
|
memcpy(&startpoint, target, sizeof(TARGET));
|
|
|
|
// not running yet, we fire up in dda_start()
|
|
dda->live = 0;
|
|
|
|
// fire up
|
|
enableTimerInterrupt();
|
|
}
|
|
|
|
/*
|
|
START
|
|
*/
|
|
|
|
void dda_start(DDA *dda) {
|
|
// called from interrupt context: keep it simple!
|
|
if (dda->nullmove) {
|
|
// just change speed?
|
|
current_position.F = dda->endpoint.F;
|
|
return;
|
|
}
|
|
|
|
x_direction(dda->x_direction);
|
|
y_direction(dda->y_direction);
|
|
z_direction(dda->z_direction);
|
|
e_direction(dda->e_direction);
|
|
|
|
enable_steppers();
|
|
|
|
dda->firstep = 1;
|
|
|
|
dda->live = 1;
|
|
}
|
|
|
|
/*
|
|
CAN STEP
|
|
*/
|
|
|
|
uint8_t can_step(uint8_t min, uint8_t max, int32_t current, int32_t target, uint8_t dir) {
|
|
if (current == target)
|
|
return 0;
|
|
|
|
if (dir) {
|
|
// forwards/positive
|
|
if (max)
|
|
return 0;
|
|
if (current > target)
|
|
return 0;
|
|
}
|
|
else {
|
|
// backwards/negative
|
|
if (min)
|
|
return 0;
|
|
if (target > current)
|
|
return 0;
|
|
}
|
|
|
|
return 255;
|
|
}
|
|
|
|
/*
|
|
STEP
|
|
*/
|
|
|
|
void dda_step(DDA *dda) {
|
|
uint8_t step_option = 0;
|
|
#define X_CAN_STEP 1
|
|
#define Y_CAN_STEP 2
|
|
#define Z_CAN_STEP 4
|
|
#define E_CAN_STEP 8
|
|
#define F_CAN_STEP 16
|
|
#define REAL_MOVE 32
|
|
#define F_REAL_STEP 64
|
|
|
|
WRITE(SCK, 1);
|
|
|
|
do {
|
|
// step_option |= can_step(x_min(), x_max(), current_position.X, dda->endpoint.X, dda->x_direction) & X_CAN_STEP;
|
|
// step_option |= can_step(y_min(), y_max(), current_position.Y, dda->endpoint.Y, dda->y_direction) & Y_CAN_STEP;
|
|
// step_option |= can_step(z_min(), z_max(), current_position.Z, dda->endpoint.Z, dda->z_direction) & Z_CAN_STEP;
|
|
step_option |= can_step(0 , 0 , current_position.X, dda->endpoint.X, dda->x_direction) & X_CAN_STEP;
|
|
step_option |= can_step(0 , 0 , current_position.Y, dda->endpoint.Y, dda->y_direction) & Y_CAN_STEP;
|
|
step_option |= can_step(0 , 0 , current_position.Z, dda->endpoint.Z, dda->z_direction) & Z_CAN_STEP;
|
|
step_option |= can_step(0 , 0 , current_position.E, dda->endpoint.E, dda->e_direction) & E_CAN_STEP;
|
|
step_option |= can_step(0 , 0 , current_position.F, dda->endpoint.F, dda->f_direction) & F_CAN_STEP;
|
|
|
|
if (step_option & X_CAN_STEP) {
|
|
dda->x_counter -= dda->x_delta;
|
|
if (dda->x_counter < 0) {
|
|
step_option |= REAL_MOVE;
|
|
|
|
x_step();
|
|
if (dda->x_direction)
|
|
current_position.X++;
|
|
else
|
|
current_position.X--;
|
|
|
|
dda->x_counter += dda->total_steps;
|
|
}
|
|
}
|
|
|
|
if (step_option & Y_CAN_STEP) {
|
|
dda->y_counter -= dda->y_delta;
|
|
if (dda->y_counter < 0) {
|
|
step_option |= REAL_MOVE;
|
|
|
|
y_step();
|
|
if (dda->y_direction)
|
|
current_position.Y++;
|
|
else
|
|
current_position.Y--;
|
|
|
|
dda->y_counter += dda->total_steps;
|
|
}
|
|
}
|
|
|
|
if (step_option & Z_CAN_STEP) {
|
|
dda->z_counter -= dda->z_delta;
|
|
if (dda->z_counter < 0) {
|
|
step_option |= REAL_MOVE;
|
|
|
|
z_step();
|
|
if (dda->z_direction)
|
|
current_position.Z++;
|
|
else
|
|
current_position.Z--;
|
|
|
|
dda->z_counter += dda->total_steps;
|
|
}
|
|
}
|
|
|
|
if (step_option & E_CAN_STEP) {
|
|
dda->e_counter -= dda->e_delta;
|
|
if (dda->e_counter < 0) {
|
|
step_option |= REAL_MOVE;
|
|
|
|
e_step();
|
|
if (dda->e_direction)
|
|
current_position.E++;
|
|
else
|
|
current_position.E--;
|
|
|
|
dda->e_counter += dda->total_steps;
|
|
}
|
|
}
|
|
|
|
if (step_option & F_CAN_STEP) {
|
|
dda->f_counter -= dda->f_delta;
|
|
if (dda->f_counter < 0) {
|
|
|
|
dda->f_counter += dda->total_steps;
|
|
|
|
if (dda->f_scale == 0)
|
|
dda->f_scale = 1;
|
|
|
|
if (dda->f_direction) {
|
|
current_position.F += dda->f_scale;
|
|
if (current_position.F > dda->endpoint.F)
|
|
current_position.F = dda->endpoint.F;
|
|
}
|
|
else {
|
|
current_position.F -= dda->f_scale;
|
|
if (current_position.F < dda->endpoint.F)
|
|
current_position.F = dda->endpoint.F;
|
|
}
|
|
|
|
step_option |= F_REAL_STEP;
|
|
}
|
|
}
|
|
|
|
serial_writechar('[');
|
|
serwrite_hex8(step_option);
|
|
serial_writechar(':');
|
|
serwrite_uint16(dda->f_scale);
|
|
serial_writechar(',');
|
|
serwrite_int32(current_position.F);
|
|
serial_writechar('/');
|
|
serwrite_int32(dda->endpoint.F);
|
|
serial_writechar('#');
|
|
serwrite_uint32(dda->move_duration);
|
|
serial_writechar(']');
|
|
} while ( ((step_option & REAL_MOVE ) == 0) &&
|
|
((step_option & F_CAN_STEP) != 0) );
|
|
|
|
// turn off step outputs, hopefully they've been on long enough by now to register with the drivers
|
|
unstep();
|
|
|
|
// we have stepped in speed and now need to recalculate our delay
|
|
if ((step_option & REAL_MOVE) && ((step_option & F_REAL_STEP) || (dda->firstep))) {
|
|
setTimer(dda->move_duration / current_position.F);
|
|
dda->firstep = 0;
|
|
}
|
|
|
|
// if we could step, we're still running
|
|
dda->live = (step_option & (X_CAN_STEP | Y_CAN_STEP | Z_CAN_STEP | E_CAN_STEP | F_CAN_STEP))?1:0;
|
|
|
|
WRITE(SCK, 0);
|
|
}
|