josh
/
Teacup_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Teacup_Firmware/config
History
Nico Tonnhofer f8c78e6384 heaters: add max heater value 
You can reduce the max. power of each heater.
With the max_pwm value between 1 and 100% you reduce the active pwm.
For example you could reduce the power of your hotend.

My hotend for example is 12V 30W but connected to 24V. So it has
normally 120W. This is very huge. Setting the max_pwm to 25, it has
again ~30W.
 		2017-03-21 14:48:15 +01:00
..
board.3drag.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.cnc-shield-v3-nucleo.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.cnc-shield-v3.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.gen3.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.gen6.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.gen7-arm.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.gen7-v1.1-v1.3.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.gen7-v1.4.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.melzi.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.nanoheart-v1.0.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.pcbscriber.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.ramps-v1.2.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.ramps-v1.3.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.rumba.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.sanguinololu-v1.1.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.sanguinololu-v1.2.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.sanguish.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.sinaptec-at328-02.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.teensy++-v2.0.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.teensy-v2.0.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
board.tronxy.h heaters: add max heater value 2017-03-21 14:48:15 +01:00
config-syntax.txt Configtool: make KINEMATICS a set of booleans, too. 2016-04-20 22:02:07 +02:00
printer.mendel.h Config files: update comment/help text for USE_INTERNAL_PULLUPS. 2016-09-30 13:51:01 +02:00
printer.mendel90.h Config files: update comment/help text for USE_INTERNAL_PULLUPS. 2016-09-30 13:51:01 +02:00
printer.pcbscriber.h PCBScriber config files. 2016-11-20 14:45:45 +01:00
printer.tronxy.h Config files: update comment/help text for USE_INTERNAL_PULLUPS. 2016-09-30 13:51:01 +02:00
printer.wolfstrap.h Config files: update comment/help text for USE_INTERNAL_PULLUPS. 2016-09-30 13:51:01 +02:00