josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

README: Fix formatting

This commit is contained in:
Yuri D'Elia 2022-12-29 12:56:16 +01:00
parent 4ff9324377
commit 4258ecef36
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
README.md
View File

@ -147,7 +147,7 @@ After updating the kit, you may need to reload VScode.
#### Building
To start building a firmware, click the CMake Tools plugin icon on the far left side. You will get a very large list of targets to build. Find the firmware you'd like to build (like `MK3S-EINSy10a_ENGLISH`)and select the small icon which shows "Build" when hovered over.
To start building a firmware, click the CMake Tools plugin icon on the far left side. You will get a very large list of targets to build. Find the firmware you'd like to build (like `MK3S-EINSy10a_ENGLISH`) and select the small icon which shows "Build" when hovered over.
The built .hex file can then be found in folder `Prusa-Firmware/build`
@ -187,10 +187,10 @@ Run "Arduino IDE", then
- Open the file `Firmware/Firmware.ino`
- Select the target board with Tools -> Board -> "PrusaResearch Einsy RAMBo"
- Open `Firmware/config.h` and change LANG_MODE to 0.
- Open `Firmware/config.h` and change `LANG_MODE` to 0.
### Compilation and upload
- Run the compilation Sketch -> Verify/Compile
- Upload the result code into the connected printer Sketch -> Upload
- Run the compilation: Sketch -> Verify/Compile
- Upload the result code into the connected printer: Sketch -> Upload