josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'MK2-DE' into MK2

This commit is contained in:
3d-gussner 2017-09-29 17:42:13 +02:00 committed by GitHub
parent 3054db0e5a c443992b3c
commit 6aca8e8c00
4 changed files with 485 additions and 447 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

202
Firmware/language_all.cpp
View File

@ -98,7 +98,7 @@ const char MSG_BABYSTEP_Z_CZ[] PROGMEM = "Doladeni osy Z";
const char MSG_BABYSTEP_Z_IT[] PROGMEM = "Compensazione Z";
const char MSG_BABYSTEP_Z_ES[] PROGMEM = "Micropaso Eje Z";
const char MSG_BABYSTEP_Z_PL[] PROGMEM = "Dostrojenie osy Z";
const char MSG_BABYSTEP_Z_DE[] PROGMEM = "Z einstellen";
const char MSG_BABYSTEP_Z_DE[] PROGMEM = "Live Z einstellen";
const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BABYSTEP_Z_EN,
MSG_BABYSTEP_Z_CZ,
@ -113,7 +113,7 @@ const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost t
const char MSG_BABYSTEP_Z_NOT_SET_IT[] PROGMEM = "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_ES[] PROGMEM = "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_PL[] PROGMEM = "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy.";
const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Bed ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Druckoberflaeche / Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, Abschnitt First layer calibration.";
const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BABYSTEP_Z_NOT_SET_EN,
MSG_BABYSTEP_Z_NOT_SET_CZ,
@ -127,13 +127,14 @@ const char MSG_BED_EN[] PROGMEM = "Bed";
const char MSG_BED_IT[] PROGMEM = "Letto";
const char MSG_BED_ES[] PROGMEM = "Base";
const char MSG_BED_PL[] PROGMEM = "Stolik";
const char MSG_BED_DE[] PROGMEM = "Bett";
const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_EN,
MSG_BED_EN,
MSG_BED_IT,
MSG_BED_ES,
MSG_BED_PL,
MSG_BED_EN
MSG_BED_DE
};
const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
@ -171,7 +172,7 @@ const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky";
const char MSG_BED_CORRECTION_MENU_IT[] PROGMEM = "Correz. liv.letto";
const char MSG_BED_CORRECTION_MENU_ES[] PROGMEM = "Corr. de la cama";
const char MSG_BED_CORRECTION_MENU_PL[] PROGMEM = "Korekta podkladki";
const char MSG_BED_CORRECTION_MENU_DE[] PROGMEM = "Bed level Korrekt";
const char MSG_BED_CORRECTION_MENU_DE[] PROGMEM = "Bett level korrekt";
const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_CORRECTION_MENU_EN,
MSG_BED_CORRECTION_MENU_CZ,
@ -197,7 +198,7 @@ const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset";
const char MSG_BED_CORRECTION_RESET_DE[] PROGMEM = "Ruecksetzen";
const char MSG_BED_CORRECTION_RESET_DE[] PROGMEM = "Zuruecksetzen";
const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_CORRECTION_RESET_EN,
MSG_BED_CORRECTION_RESET_EN,
@ -227,7 +228,7 @@ const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK.";
const char MSG_BED_DONE_IT[] PROGMEM = "Piatto fatto.";
const char MSG_BED_DONE_ES[] PROGMEM = "Base preparada";
const char MSG_BED_DONE_PL[] PROGMEM = "Stolik OK.";
const char MSG_BED_DONE_DE[] PROGMEM = "Bed OK";
const char MSG_BED_DONE_DE[] PROGMEM = "Bett OK";
const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_DONE_EN,
MSG_BED_DONE_CZ,
@ -242,7 +243,7 @@ const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed";
const char MSG_BED_HEATING_IT[] PROGMEM = "Riscald. letto";
const char MSG_BED_HEATING_ES[] PROGMEM = "Calentando Base";
const char MSG_BED_HEATING_PL[] PROGMEM = "Grzanie stolika..";
const char MSG_BED_HEATING_DE[] PROGMEM = "Bed aufwaermen";
const char MSG_BED_HEATING_DE[] PROGMEM = "Bett aufwaermen";
const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_HEATING_EN,
MSG_BED_HEATING_CZ,
@ -257,7 +258,7 @@ const char MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ[] PROGMEM = "Kalibrace Z selhal
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_IT[] PROGMEM = "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_ES[] PROGMEM = "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_PL[] PROGMEM = "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor wurde zu hoch ausgeloest. Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_POINT_HIGH_EN,
MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ,
@ -272,7 +273,7 @@ const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala
const char MSG_BED_LEVELING_FAILED_POINT_LOW_IT[] PROGMEM = "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_ES[] PROGMEM = "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_PL[] PROGMEM = "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor wurde nicht ausgeloest. Schmutzige Duese? Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_POINT_LOW_EN,
MSG_BED_LEVELING_FAILED_POINT_LOW_CZ,
@ -287,7 +288,7 @@ const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ[] PROGMEM = "Kalibrace
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_IT[] PROGMEM = "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_ES[] PROGMEM = "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_PL[] PROGMEM = "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor nicht angeschlossen oder Kabel defekt. Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN,
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ,
@ -302,7 +303,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "K
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ,
@ -317,7 +318,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "K
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker voderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ,
@ -332,7 +333,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ,
@ -377,7 +378,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibra
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_IT[] PROGMEM = "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL[] PROGMEM = "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bed-Kalibrierpunkt nicht gefunden.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN,
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ,
@ -392,7 +393,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT[] PROGMEM = "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES[] PROGMEM = "Calibracion XYZ correcta. La inclinacion se corregira automaticamente.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE[] PROGMEM = "XYZ-Kalibrierung ok. X/Y-Achsen sind sehr schief. Schiefheit wird automatisch korrigiert.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN,
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ,
@ -407,7 +408,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_IT[] PROGMEM = "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_ES[] PROGMEM = "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE[] PROGMEM = "XYZ-Kalibrierung ok. X/Y-Achsen sind etwas schief. Schiefheit wird automatisch korrigiert. Gut gemacht!";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN,
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ,
@ -422,7 +423,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ,
@ -437,7 +438,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ,
@ -452,7 +453,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM =
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ,
@ -520,7 +521,7 @@ const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
const char MSG_CALIBRATE_PINDA_IT[] PROGMEM = "Calibrare";
const char MSG_CALIBRATE_PINDA_ES[] PROGMEM = "Calibrar";
const char MSG_CALIBRATE_PINDA_PL[] PROGMEM = "Skalibrowac";
const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "Kalibrieren";
const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "PINDA Temp. Kal.";
const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CALIBRATE_PINDA_EN,
MSG_CALIBRATE_PINDA_CZ,
@ -535,7 +536,7 @@ const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
const char MSG_CALIBRATION_PINDA_MENU_IT[] PROGMEM = "Taratura temp.";
const char MSG_CALIBRATION_PINDA_MENU_ES[] PROGMEM = "Calibracion temp.";
const char MSG_CALIBRATION_PINDA_MENU_PL[] PROGMEM = "Cieplna kalibr.";
const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "Temp. kalibrieren";
const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "PINDA Temp. Kal.";
const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CALIBRATION_PINDA_MENU_EN,
MSG_CALIBRATION_PINDA_MENU_CZ,
@ -595,7 +596,7 @@ const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!";
const char MSG_CHANGE_SUCCESS_IT[] PROGMEM = "Cambio riuscito!";
const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambio correcto";
const char MSG_CHANGE_SUCCESS_PL[] PROGMEM = "Wymiana ok!";
const char MSG_CHANGE_SUCCESS_DE[] PROGMEM = "Wechsel erfolgr.!";
const char MSG_CHANGE_SUCCESS_DE[] PROGMEM = "Wechsel erfolgreich!";
const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CHANGE_SUCCESS_EN,
MSG_CHANGE_SUCCESS_CZ,
@ -665,7 +666,7 @@ const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ[] PROGMEM = "Dojely oba Z voziky k
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_IT[] PROGMEM = "I carrelli Z sin/des sono altezza max?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_ES[] PROGMEM = "Carros Z izq./der. estan arriba maximo?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_PL[] PROGMEM = "Oba wozki dojechaly do gornej ramy?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE[] PROGMEM = "Ist der Schlitten ganz oben?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE[] PROGMEM = "Sind beide Z Schlitten ganz oben?";
const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN,
MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ,
@ -680,7 +681,7 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocist
const char MSG_CONFIRM_NOZZLE_CLEAN_IT[] PROGMEM = "Pulire l'ugello per la calibrazione, poi fare click.";
const char MSG_CONFIRM_NOZZLE_CLEAN_ES[] PROGMEM = "Limpiar boquilla para calibracion. Click cuando acabes.";
const char MSG_CONFIRM_NOZZLE_CLEAN_PL[] PROGMEM = "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber.";
const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte reinigen Sie die Duese vor Kalibrierung. Klicken wenn sauber.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_NOZZLE_CLEAN_EN,
MSG_CONFIRM_NOZZLE_CLEAN_CZ,
@ -695,7 +696,7 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovn
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_IT[] PROGMEM = "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES[] PROGMEM = "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL[] PROGMEM = "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn sauber.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN,
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ,
@ -765,7 +766,7 @@ const char MSG_DATE_CZ[] PROGMEM = "Datum:";
const char MSG_DATE_IT[] PROGMEM = "Data";
const char MSG_DATE_ES[] PROGMEM = "Fecha:";
const char MSG_DATE_PL[] PROGMEM = "Data:";
const char MSG_DATE_DE[] PROGMEM = "Datum";
const char MSG_DATE_DE[] PROGMEM = "Datum:";
const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DATE_EN,
MSG_DATE_CZ,
@ -776,8 +777,14 @@ const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Default settings loaded";
const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1] PROGMEM = {
MSG_DEFAULT_SETTINGS_LOADED_EN
const char MSG_DEFAULT_SETTINGS_LOADED_DE[] PROGMEM = "Standardeinstellungen geladen";
const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_DE
};
const char MSG_DISABLE_STEPPERS_EN[] PROGMEM = "Disable steppers";
@ -798,7 +805,7 @@ const char * const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_DWELL_EN[] PROGMEM = "Sleep...";
const char MSG_DWELL_IT[] PROGMEM = "Sospensione...";
const char MSG_DWELL_ES[] PROGMEM = "En espera";
const char MSG_DWELL_DE[] PROGMEM = "Einen Moment bitte.";
const char MSG_DWELL_DE[] PROGMEM = "Warten...";
const char * const MSG_DWELL_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DWELL_EN,
MSG_DWELL_EN,
@ -1112,7 +1119,7 @@ const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim
const char MSG_FIL_ADJUSTING_IT[] PROGMEM = "Filamento in fase di regolazione. Attendere prego.";
const char MSG_FIL_ADJUSTING_ES[] PROGMEM = "Ajustando filamentos. Esperar por favor.";
const char MSG_FIL_ADJUSTING_PL[] PROGMEM = "Przebiega wyrownanie filamentow. Prosze czekac.";
const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Filament positionieren. Bitte warten.";
const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Einstellen Filament. Bitte warten.";
const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIL_ADJUSTING_EN,
MSG_FIL_ADJUSTING_CZ,
@ -1127,13 +1134,14 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_IT[] PROGMEM = "Reiterazione ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES[] PROGMEM = "Reiteracion ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_PL[] PROGMEM = "Iteracja ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE[] PROGMEM = "Wiederholung ";
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_IT,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_PL,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE
};
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point";
@ -1141,7 +1149,7 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Ricerca del letto punto di calibraz.";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Buscando cama punto de calibracion";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Szukam punktu kalibracyjnego podkladki";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suchen Bed Kalibrierpunkt";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suche Bett Kalibrierpunkt";
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN,
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ,
@ -1171,7 +1179,7 @@ const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
const char MSG_FINISHING_MOVEMENTS_IT[] PROGMEM = "Arresto in corso";
const char MSG_FINISHING_MOVEMENTS_ES[] PROGMEM = "Term. movimientos";
const char MSG_FINISHING_MOVEMENTS_PL[] PROGMEM = "Konczenie druku";
const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegung beenden";
const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegungen beenden";
const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FINISHING_MOVEMENTS_EN,
MSG_FINISHING_MOVEMENTS_CZ,
@ -1316,7 +1324,7 @@ const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presno
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Perfezion. il letto punto di calibraz.";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Mejorando cama punto de calibracion";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Poprawiam precyzyjnosc punktu kalibracyjnego";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Verbesserung Bed Kalibrierpunkt";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Genauigkeit verbessern bei Kalibrierpunkt";
const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN,
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ,
@ -1444,7 +1452,7 @@ const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu";
const char MSG_LOADING_FILAMENT_IT[] PROGMEM = "Caricando filam.";
const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Introduciendo filam.";
const char MSG_LOADING_FILAMENT_PL[] PROGMEM = "Wprow. filamentu";
const char MSG_LOADING_FILAMENT_DE[] PROGMEM = "Filament leadt";
const char MSG_LOADING_FILAMENT_DE[] PROGMEM = "Filament laedt";
const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_LOADING_FILAMENT_EN,
MSG_LOADING_FILAMENT_CZ,
@ -1554,7 +1562,7 @@ const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka";
const char MSG_LOOSE_PULLEY_IT[] PROGMEM = "Puleggia lenta";
const char MSG_LOOSE_PULLEY_ES[] PROGMEM = "Polea suelta";
const char MSG_LOOSE_PULLEY_PL[] PROGMEM = "Kolo pasowe";
const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Lose Riemenscheibe";
const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Loser pulley";
const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_LOOSE_PULLEY_EN,
MSG_LOOSE_PULLEY_CZ,
@ -1644,7 +1652,7 @@ const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
const char MSG_MEASURED_SKEW_IT[] PROGMEM = "Incl. misurata:";
const char MSG_MEASURED_SKEW_ES[] PROGMEM = "Inclin. medida:";
const char MSG_MEASURED_SKEW_PL[] PROGMEM = "Zmier. sciecie:";
const char MSG_MEASURED_SKEW_DE[] PROGMEM = "Schraeglauf:";
const char MSG_MEASURED_SKEW_DE[] PROGMEM = "Symmetrie:";
const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MEASURED_SKEW_EN,
MSG_MEASURED_SKEW_CZ,
@ -1740,7 +1748,7 @@ const char MSG_MOVE_AXIS_CZ[] PROGMEM = "Posunout osu";
const char MSG_MOVE_AXIS_IT[] PROGMEM = "Muovi asse";
const char MSG_MOVE_AXIS_ES[] PROGMEM = "Mover ejes";
const char MSG_MOVE_AXIS_PL[] PROGMEM = "Ruch osi";
const char MSG_MOVE_AXIS_DE[] PROGMEM = "Achsbewegung";
const char MSG_MOVE_AXIS_DE[] PROGMEM = "Bewege Achse";
const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_AXIS_EN,
MSG_MOVE_AXIS_CZ,
@ -1755,7 +1763,7 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_IT[] PROGMEM = "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_ES[] PROGMEM = "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_PL[] PROGMEM = "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_CARRIAGE_TO_THE_TOP_EN,
MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ,
@ -1770,7 +1778,7 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_IT[] PROGMEM = "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES[] PROGMEM = "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL[] PROGMEM = "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN,
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ,
@ -1885,7 +1893,7 @@ const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista";
const char MSG_NOT_COLOR_IT[] PROGMEM = "Colore non puro";
const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no homogeneo";
const char MSG_NOT_COLOR_PL[] PROGMEM = "Kolor zanieczysz.";
const char MSG_NOT_COLOR_DE[] PROGMEM = "Farbe unklar";
const char MSG_NOT_COLOR_DE[] PROGMEM = "Farbe nicht klar.";
const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_NOT_COLOR_EN,
MSG_NOT_COLOR_CZ,
@ -1983,7 +1991,7 @@ const char MSG_PAPER_CZ[] PROGMEM = "Umistete list papiru na podlozku a udrzujte
const char MSG_PAPER_IT[] PROGMEM = "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante.";
const char MSG_PAPER_ES[] PROGMEM = "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente.";
const char MSG_PAPER_PL[] PROGMEM = "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke.";
const char MSG_PAPER_DE[] PROGMEM = "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten";
const char MSG_PAPER_DE[] PROGMEM = "Lege waehrend der Kalibrierung der ersten 4 Punkte ein Blatt Papier unter die Duese. Wenn die Duese das Papier bewegt, Drucker sofort ausschalten!";
const char * const MSG_PAPER_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PAPER_EN,
MSG_PAPER_CZ,
@ -1998,7 +2006,7 @@ const char MSG_PAUSE_PRINT_CZ[] PROGMEM = "Pozastavit tisk";
const char MSG_PAUSE_PRINT_IT[] PROGMEM = "Metti in pausa";
const char MSG_PAUSE_PRINT_ES[] PROGMEM = "Pausar impresion";
const char MSG_PAUSE_PRINT_PL[] PROGMEM = "Przerwac druk";
const char MSG_PAUSE_PRINT_DE[] PROGMEM = "Druck unterbrech.";
const char MSG_PAUSE_PRINT_DE[] PROGMEM = "Pause";
const char * const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PAUSE_PRINT_EN,
MSG_PAUSE_PRINT_CZ,
@ -2012,7 +2020,7 @@ const char MSG_PICK_Z_EN[] PROGMEM = "Pick print";
const char MSG_PICK_Z_CZ[] PROGMEM = "Vyberte vytisk";
const char MSG_PICK_Z_ES[] PROGMEM = "Esc. Modelo Adecuado";
const char MSG_PICK_Z_PL[] PROGMEM = "Vyberte vytisk";
const char MSG_PICK_Z_DE[] PROGMEM = "Waehle Abdruck";
const char MSG_PICK_Z_DE[] PROGMEM = "Waehle Druck";
const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PICK_Z_EN,
MSG_PICK_Z_CZ,
@ -2037,12 +2045,12 @@ const char * const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_EXTRUDER_DE
};
const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished";
const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished ";
const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
const char MSG_PID_FINISHED_IT[] PROGMEM = "Cal. PID completa";
const char MSG_PID_FINISHED_ES[] PROGMEM = "Cal. PID terminada";
const char MSG_PID_FINISHED_PL[] PROGMEM = "Kal. PID zakonczona";
const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kalib. fertig";
const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kal. fertig ";
const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_FINISHED_EN,
MSG_PID_FINISHED_CZ,
@ -2057,7 +2065,7 @@ const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal. ";
const char MSG_PID_RUNNING_IT[] PROGMEM = "Cal. PID";
const char MSG_PID_RUNNING_ES[] PROGMEM = "Cal. PID ";
const char MSG_PID_RUNNING_PL[] PROGMEM = "Kal. PID";
const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kalib.";
const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kal. ";
const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_RUNNING_EN,
MSG_PID_RUNNING_CZ,
@ -2072,7 +2080,7 @@ const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zka
const char MSG_PINDA_NOT_CALIBRATED_IT[] PROGMEM = "Taratura della temperatura non ancora eseguita";
const char MSG_PINDA_NOT_CALIBRATED_ES[] PROGMEM = "La temperatura de calibracion no ha sido ajustada";
const char MSG_PINDA_NOT_CALIBRATED_PL[] PROGMEM = "Cieplna kalibracja nie byla przeprowadzona";
const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "Temperatur wurde nicht kalibriert";
const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "PINDA Temperatur Kalibrierung wurde noch nicht ausgefuehrt";
const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PINDA_NOT_CALIBRATED_EN,
MSG_PINDA_NOT_CALIBRATED_CZ,
@ -2157,7 +2165,7 @@ const char MSG_PREHEAT_NOZZLE_CZ[] PROGMEM = "Predehrejte trysku!";
const char MSG_PREHEAT_NOZZLE_IT[] PROGMEM = "Preris. ugello!";
const char MSG_PREHEAT_NOZZLE_ES[] PROGMEM = "Precalentar extrusor";
const char MSG_PREHEAT_NOZZLE_PL[] PROGMEM = "Nagrzej dysze!";
const char MSG_PREHEAT_NOZZLE_DE[] PROGMEM = "Duese Vorwaermen";
const char MSG_PREHEAT_NOZZLE_DE[] PROGMEM = "Duese vorwaermen!";
const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PREHEAT_NOZZLE_EN,
MSG_PREHEAT_NOZZLE_CZ,
@ -2198,8 +2206,14 @@ const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_PRINTER_DISCONNECTED_EN[] PROGMEM = "Printer disconnected";
const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1] PROGMEM = {
MSG_PRINTER_DISCONNECTED_EN
const char MSG_PRINTER_DISCONNECTED_DE[] PROGMEM = "Drucker getrent";
const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_DE
};
const char MSG_PRINT_ABORTED_EN[] PROGMEM = "Print aborted";
@ -2273,7 +2287,7 @@ const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu";
const char MSG_REBOOT_IT[] PROGMEM = "Riavvia stampante";
const char MSG_REBOOT_ES[] PROGMEM = "Reiniciar impresora";
const char MSG_REBOOT_PL[] PROGMEM = "Restart drukarki";
const char MSG_REBOOT_DE[] PROGMEM = "Zum Uebernehmen ";
const char MSG_REBOOT_DE[] PROGMEM = "Reboot den Drucker";
const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_REBOOT_EN,
MSG_REBOOT_CZ,
@ -2343,7 +2357,7 @@ const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
const char MSG_RESUMING_PRINT_IT[] PROGMEM = "Stampa in ripresa";
const char MSG_RESUMING_PRINT_ES[] PROGMEM = "Reanudar impresion";
const char MSG_RESUMING_PRINT_PL[] PROGMEM = "Wznawianie druku";
const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck weitergehen";
const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck fortsetzen";
const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_RESUMING_PRINT_EN,
MSG_RESUMING_PRINT_CZ,
@ -2518,7 +2532,7 @@ const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_IT[] PROGMEM = "Verifica letto";
const char MSG_SELFTEST_CHECK_BED_ES[] PROGMEM = "Control de cama";
const char MSG_SELFTEST_CHECK_BED_PL[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pr\x81fe Bed ";
const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pruefe Bett ";
const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_CHECK_BED_EN,
MSG_SELFTEST_CHECK_BED_CZ,
@ -2608,7 +2622,7 @@ const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";;
const char MSG_SELFTEST_COOLING_FAN_IT[] PROGMEM = "Vent di stampa ant.?";;
const char MSG_SELFTEST_COOLING_FAN_ES[] PROGMEM = "Vent. al frente?";;
const char MSG_SELFTEST_COOLING_FAN_PL[] PROGMEM = "Przodni went. druku?";;
const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vorderer Luefter?";
const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vorderer Luefter?";;
const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_COOLING_FAN_EN,
MSG_SELFTEST_COOLING_FAN_CZ,
@ -2646,7 +2660,7 @@ const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_IT[] PROGMEM = "Finec. fuori por.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_ES[] PROGMEM = "Tope fin. no toc.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "Ende nicht getrof.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "Endsch. n. erreicht";
const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ENDSTOP_NOTHIT_EN,
MSG_SELFTEST_ENDSTOP_NOTHIT_EN,
@ -2659,7 +2673,7 @@ const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ERROR_EN[] PROGMEM = "Selftest error !";
const char MSG_SELFTEST_ERROR_IT[] PROGMEM = "Autotest negativo";
const char MSG_SELFTEST_ERROR_ES[] PROGMEM = "Autotest error!";
const char MSG_SELFTEST_ERROR_DE[] PROGMEM = "Selbtest Fehler!";
const char MSG_SELFTEST_ERROR_DE[] PROGMEM = "Selbsttest Fehler !";
const char * const MSG_SELFTEST_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ERROR_EN,
MSG_SELFTEST_ERROR_EN,
@ -2674,7 +2688,7 @@ const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";;
const char MSG_SELFTEST_EXTRUDER_FAN_IT[] PROGMEM = "Vent SX sull'ugello?";;
const char MSG_SELFTEST_EXTRUDER_FAN_ES[] PROGMEM = "Vent. en la izg?";;
const char MSG_SELFTEST_EXTRUDER_FAN_PL[] PROGMEM = "Lewy went na dysze?";;
const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Linker Luefter?";
const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Linker Luefter?";;
const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_EXTRUDER_FAN_EN,
MSG_SELFTEST_EXTRUDER_FAN_CZ,
@ -2689,7 +2703,7 @@ const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal ";
const char MSG_SELFTEST_FAILED_IT[] PROGMEM = "Autotest fallito";
const char MSG_SELFTEST_FAILED_ES[] PROGMEM = "Autotest fallado";
const char MSG_SELFTEST_FAILED_PL[] PROGMEM = "Selftest nieudany";
const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbsttest misslung.";
const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbsttest misluekt";
const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAILED_EN,
MSG_SELFTEST_FAILED_CZ,
@ -2704,7 +2718,7 @@ const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";;
const char MSG_SELFTEST_FAN_IT[] PROGMEM = "Prova del ventilator";;
const char MSG_SELFTEST_FAN_ES[] PROGMEM = "Test del ventilador";;
const char MSG_SELFTEST_FAN_PL[] PROGMEM = "Test wentylatora";;
const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest";
const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest";;
const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_EN,
MSG_SELFTEST_FAN_CZ,
@ -2719,7 +2733,7 @@ const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";;
const char MSG_SELFTEST_FAN_NO_IT[] PROGMEM = "Non si gira";;
const char MSG_SELFTEST_FAN_NO_ES[] PROGMEM = "Ventilador no gira";;
const char MSG_SELFTEST_FAN_NO_PL[] PROGMEM = "Nekreci sie";;
const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht";
const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht";;
const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_NO_EN,
MSG_SELFTEST_FAN_NO_CZ,
@ -2734,7 +2748,7 @@ const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";;
const char MSG_SELFTEST_FAN_YES_IT[] PROGMEM = "Gira";;
const char MSG_SELFTEST_FAN_YES_ES[] PROGMEM = "Ventilador gira";;
const char MSG_SELFTEST_FAN_YES_PL[] PROGMEM = "Kreci sie";;
const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht";
const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht";;
const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_YES_EN,
MSG_SELFTEST_FAN_YES_CZ,
@ -2828,7 +2842,7 @@ const char MSG_SELFTEST_WIRINGERROR_CZ[] PROGMEM = "Chyba zapojeni";
const char MSG_SELFTEST_WIRINGERROR_IT[] PROGMEM = "Errore cablaggio";
const char MSG_SELFTEST_WIRINGERROR_ES[] PROGMEM = "Error de conexion";
const char MSG_SELFTEST_WIRINGERROR_PL[] PROGMEM = "Blad polaczenia";
const char MSG_SELFTEST_WIRINGERROR_DE[] PROGMEM = "Verdrahtungfehler";
const char MSG_SELFTEST_WIRINGERROR_DE[] PROGMEM = "Verdrahtungsfehler";
const char * const MSG_SELFTEST_WIRINGERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_WIRINGERROR_EN,
MSG_SELFTEST_WIRINGERROR_CZ,
@ -2873,7 +2887,7 @@ const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
const char MSG_SET_TEMPERATURE_IT[] PROGMEM = "Imposta temperatura";
const char MSG_SET_TEMPERATURE_ES[] PROGMEM = "Establecer temp.:";
const char MSG_SET_TEMPERATURE_PL[] PROGMEM = "Ustawic temperature";
const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp. einsetzen";
const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp.einstellen";
const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SET_TEMPERATURE_EN,
MSG_SET_TEMPERATURE_CZ,
@ -2888,7 +2902,7 @@ const char MSG_SEVERE_SKEW_CZ[] PROGMEM = "Tezke zkoseni:";
const char MSG_SEVERE_SKEW_IT[] PROGMEM = "Inc. rilevante:";
const char MSG_SEVERE_SKEW_ES[] PROGMEM = "Inclin. severa:";
const char MSG_SEVERE_SKEW_PL[] PROGMEM = "Ostre sciecie:";
const char MSG_SEVERE_SKEW_DE[] PROGMEM = "Schwerer Schr.:";
const char MSG_SEVERE_SKEW_DE[] PROGMEM = "Schwere Asym.:";
const char * const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SEVERE_SKEW_EN,
MSG_SEVERE_SKEW_CZ,
@ -2903,7 +2917,7 @@ const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin.";
const char MSG_SHOW_END_STOPS_IT[] PROGMEM = "Stato finecorsa";
const char MSG_SHOW_END_STOPS_ES[] PROGMEM = "Ensena tope final";
const char MSG_SHOW_END_STOPS_PL[] PROGMEM = "Pokaz krancowki";
const char MSG_SHOW_END_STOPS_DE[] PROGMEM = "Endschalter Stat.";
const char MSG_SHOW_END_STOPS_DE[] PROGMEM = "Anzeigen Enschalter";
const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SHOW_END_STOPS_EN,
MSG_SHOW_END_STOPS_CZ,
@ -2933,7 +2947,7 @@ const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod [tichy]";
const char MSG_SILENT_MODE_ON_IT[] PROGMEM = "Modo [silenzioso]";
const char MSG_SILENT_MODE_ON_ES[] PROGMEM = "Modo [silencio]";
const char MSG_SILENT_MODE_ON_PL[] PROGMEM = "Mod [cichy]";
const char MSG_SILENT_MODE_ON_DE[] PROGMEM = "Mode [leise]";
const char MSG_SILENT_MODE_ON_DE[] PROGMEM = "Mode [leise]";
const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SILENT_MODE_ON_EN,
MSG_SILENT_MODE_ON_CZ,
@ -2948,7 +2962,7 @@ const char MSG_SLIGHT_SKEW_CZ[] PROGMEM = "Lehke zkoseni:";
const char MSG_SLIGHT_SKEW_IT[] PROGMEM = "Incl. leggera:";
const char MSG_SLIGHT_SKEW_ES[] PROGMEM = "Inclin. ligera:";
const char MSG_SLIGHT_SKEW_PL[] PROGMEM = "Lekkie sciecie:";
const char MSG_SLIGHT_SKEW_DE[] PROGMEM = "Leichter Schr.:";
const char MSG_SLIGHT_SKEW_DE[] PROGMEM = "Geringe Asym.:";
const char * const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SLIGHT_SKEW_EN,
MSG_SLIGHT_SKEW_CZ,
@ -2964,8 +2978,14 @@ const char * const MSG_SOFTWARE_RESET_LANG_TABLE[1] PROGMEM = {
};
const char MSG_SORTING_EN[] PROGMEM = "Sorting files";
const char * const MSG_SORTING_LANG_TABLE[1] PROGMEM = {
MSG_SORTING_EN
const char MSG_SORTING_DE[] PROGMEM = "Sortiere Dateien";
const char * const MSG_SORTING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_DE
};
const char MSG_SORT_ALPHA_EN[] PROGMEM = "Sort: [Alphabet]";
@ -2974,13 +2994,25 @@ const char * const MSG_SORT_ALPHA_LANG_TABLE[1] PROGMEM = {
};
const char MSG_SORT_NONE_EN[] PROGMEM = "Sort: [None]";
const char * const MSG_SORT_NONE_LANG_TABLE[1] PROGMEM = {
MSG_SORT_NONE_EN
const char MSG_SORT_NONE_DE[] PROGMEM = "Sort: [Keine]";
const char * const MSG_SORT_NONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_DE
};
const char MSG_SORT_TIME_EN[] PROGMEM = "Sort: [Time]";
const char * const MSG_SORT_TIME_LANG_TABLE[1] PROGMEM = {
MSG_SORT_TIME_EN
const char MSG_SORT_TIME_DE[] PROGMEM = "Sort: [Zeit]";
const char * const MSG_SORT_TIME_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_DE
};
const char MSG_SPEED_EN[] PROGMEM = "Speed";
@ -3053,7 +3085,7 @@ const char MSG_STATS_TOTALFILAMENT_CZ[] PROGMEM = "Filament celkem :";
const char MSG_STATS_TOTALFILAMENT_IT[] PROGMEM = "Filamento tot:";
const char MSG_STATS_TOTALFILAMENT_ES[] PROGMEM = "Filamento total:";
const char MSG_STATS_TOTALFILAMENT_PL[] PROGMEM = "Filament lacznie :";
const char MSG_STATS_TOTALFILAMENT_DE[] PROGMEM = "Gesamtfilament:";
const char MSG_STATS_TOTALFILAMENT_DE[] PROGMEM = "Filament Gesamt:";
const char * const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_STATS_TOTALFILAMENT_EN,
MSG_STATS_TOTALFILAMENT_CZ,
@ -3160,7 +3192,7 @@ const char MSG_TAKE_EFFECT_CZ[] PROGMEM = " pro projeveni zmen";
const char MSG_TAKE_EFFECT_IT[] PROGMEM = " per attualizzare";
const char MSG_TAKE_EFFECT_ES[] PROGMEM = " para aplicar cambios";
const char MSG_TAKE_EFFECT_PL[] PROGMEM = " wprow. zmian";
const char MSG_TAKE_EFFECT_DE[] PROGMEM = "Drucker neu starten";
const char MSG_TAKE_EFFECT_DE[] PROGMEM = " um wirksam zu werden";
const char * const MSG_TAKE_EFFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TAKE_EFFECT_EN,
MSG_TAKE_EFFECT_CZ,
@ -3190,7 +3222,7 @@ const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal. ";
const char MSG_TEMP_CALIBRATION_IT[] PROGMEM = "Cal. temp. ";
const char MSG_TEMP_CALIBRATION_ES[] PROGMEM = "Cal. temp. ";
const char MSG_TEMP_CALIBRATION_PL[] PROGMEM = "Ciepl. kal. ";
const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "Temp Kalib. ";
const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "PINDA Temp.Kal. ";
const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_EN,
MSG_TEMP_CALIBRATION_CZ,
@ -3205,7 +3237,7 @@ const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncen
const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp. Kalibrierung fertig. Klicken um weiter zu gehen.";
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Die PINDA Temperaturkalibrierung ist beendet. Klicke um fortzufahren.";
const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_DONE_EN,
MSG_TEMP_CALIBRATION_DONE_CZ,
@ -3220,7 +3252,7 @@ const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_IT[] PROGMEM = "Cal. temp. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_ES[] PROGMEM = "Cal. temp. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_PL[] PROGMEM = "Ciepl. kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "Temp. Kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "PINDA T.Kal.[OFF]";
const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_OFF_EN,
MSG_TEMP_CALIBRATION_OFF_CZ,
@ -3235,7 +3267,7 @@ const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_IT[] PROGMEM = "Cal. temp. [ON]";
const char MSG_TEMP_CALIBRATION_ON_ES[] PROGMEM = "Cal. temp. [ON]";
const char MSG_TEMP_CALIBRATION_ON_PL[] PROGMEM = "Ciepl. kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "Temp. Kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "PINDA T.Kal. [ON]";
const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_ON_EN,
MSG_TEMP_CALIBRATION_ON_CZ,
@ -3324,7 +3356,7 @@ const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament";
const char MSG_UNLOAD_FILAMENT_IT[] PROGMEM = "Scarica filamento";
const char MSG_UNLOAD_FILAMENT_ES[] PROGMEM = "Soltar filamento";
const char MSG_UNLOAD_FILAMENT_PL[] PROGMEM = "Wyjac filament";
const char MSG_UNLOAD_FILAMENT_DE[] PROGMEM = "Filament entladen";
const char MSG_UNLOAD_FILAMENT_DE[] PROGMEM = "Filament entnehmen";
const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_UNLOAD_FILAMENT_EN,
MSG_UNLOAD_FILAMENT_CZ,
@ -3414,7 +3446,7 @@ const char MSG_USED_CZ[] PROGMEM = "Pouzite behem tisku";
const char MSG_USED_IT[] PROGMEM = "Usati nella stampa";
const char MSG_USED_ES[] PROGMEM = "Usado en impresion";
const char MSG_USED_PL[] PROGMEM = "Uzyte przy druku";
const char MSG_USED_DE[] PROGMEM = "Beim Druck benutzte";
const char MSG_USED_DE[] PROGMEM = "Benutzt beim Druck";
const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_USED_EN,
MSG_USED_CZ,
@ -3427,7 +3459,7 @@ const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_USERWAIT_EN[] PROGMEM = "Wait for user...";
const char MSG_USERWAIT_IT[] PROGMEM = "Attendendo utente";
const char MSG_USERWAIT_ES[] PROGMEM = "Esperando ordenes";
const char MSG_USERWAIT_DE[] PROGMEM = "Warte auf user...";
const char MSG_USERWAIT_DE[] PROGMEM = "Warte auf Nutzer...";
const char * const MSG_USERWAIT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_USERWAIT_EN,
MSG_USERWAIT_EN,
@ -3467,7 +3499,7 @@ const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podloz
const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto";
const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de la cama y del extrusor.";
const char MSG_WAITING_TEMP_PL[] PROGMEM = "Oczekiwanie na wychlodzenie dyszy i podkladki.";
const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Heater und Bed.";
const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Duese und Bett.";
const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_WAITING_TEMP_EN,
MSG_WAITING_TEMP_CZ,
@ -3642,7 +3674,7 @@ const char MSG_Y_DISTANCE_FROM_MIN_CZ[] PROGMEM = "Y vzdalenost od min:";
const char MSG_Y_DISTANCE_FROM_MIN_IT[] PROGMEM = "Distanza Y da min:";
const char MSG_Y_DISTANCE_FROM_MIN_ES[] PROGMEM = "Dist. Y desde min:";
const char MSG_Y_DISTANCE_FROM_MIN_PL[] PROGMEM = "Odleglosc Y od min.:";
const char MSG_Y_DISTANCE_FROM_MIN_DE[] PROGMEM = "Y Entfernung vom min";
const char MSG_Y_DISTANCE_FROM_MIN_DE[] PROGMEM = "Y Entfernung von min";
const char * const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_Y_DISTANCE_FROM_MIN_EN,
MSG_Y_DISTANCE_FROM_MIN_CZ,

20
Firmware/language_all.h
View File

@ -150,8 +150,8 @@ extern const char* const MSG_CURRENT_LANG_TABLE[LANG_NUM];
#define MSG_CURRENT LANG_TABLE_SELECT(MSG_CURRENT_LANG_TABLE)
extern const char* const MSG_DATE_LANG_TABLE[LANG_NUM];
#define MSG_DATE LANG_TABLE_SELECT(MSG_DATE_LANG_TABLE)
extern const char* const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1];
#define MSG_DEFAULT_SETTINGS_LOADED LANG_TABLE_SELECT_EXPLICIT(MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE, 0)
extern const char* const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[LANG_NUM];
#define MSG_DEFAULT_SETTINGS_LOADED LANG_TABLE_SELECT(MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE)
extern const char* const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM];
#define MSG_DISABLE_STEPPERS LANG_TABLE_SELECT(MSG_DISABLE_STEPPERS_LANG_TABLE)
extern const char* const MSG_DWELL_LANG_TABLE[LANG_NUM];
@ -416,8 +416,8 @@ extern const char* const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM];
#define MSG_PREPARE_FILAMENT LANG_TABLE_SELECT(MSG_PREPARE_FILAMENT_LANG_TABLE)
extern const char* const MSG_PRESS_LANG_TABLE[LANG_NUM];
#define MSG_PRESS LANG_TABLE_SELECT(MSG_PRESS_LANG_TABLE)
extern const char* const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1];
#define MSG_PRINTER_DISCONNECTED LANG_TABLE_SELECT_EXPLICIT(MSG_PRINTER_DISCONNECTED_LANG_TABLE, 0)
extern const char* const MSG_PRINTER_DISCONNECTED_LANG_TABLE[LANG_NUM];
#define MSG_PRINTER_DISCONNECTED LANG_TABLE_SELECT(MSG_PRINTER_DISCONNECTED_LANG_TABLE)
extern const char* const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM];
#define MSG_PRINT_ABORTED LANG_TABLE_SELECT(MSG_PRINT_ABORTED_LANG_TABLE)
extern const char* const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM];
@ -556,14 +556,14 @@ extern const char* const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM];
#define MSG_SLIGHT_SKEW LANG_TABLE_SELECT(MSG_SLIGHT_SKEW_LANG_TABLE)
extern const char* const MSG_SOFTWARE_RESET_LANG_TABLE[1];
#define MSG_SOFTWARE_RESET LANG_TABLE_SELECT_EXPLICIT(MSG_SOFTWARE_RESET_LANG_TABLE, 0)
extern const char* const MSG_SORTING_LANG_TABLE[1];
#define MSG_SORTING LANG_TABLE_SELECT_EXPLICIT(MSG_SORTING_LANG_TABLE, 0)
extern const char* const MSG_SORTING_LANG_TABLE[LANG_NUM];
#define MSG_SORTING LANG_TABLE_SELECT(MSG_SORTING_LANG_TABLE)
extern const char* const MSG_SORT_ALPHA_LANG_TABLE[1];
#define MSG_SORT_ALPHA LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_ALPHA_LANG_TABLE, 0)
extern const char* const MSG_SORT_NONE_LANG_TABLE[1];
#define MSG_SORT_NONE LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_NONE_LANG_TABLE, 0)
extern const char* const MSG_SORT_TIME_LANG_TABLE[1];
#define MSG_SORT_TIME LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_TIME_LANG_TABLE, 0)
extern const char* const MSG_SORT_NONE_LANG_TABLE[LANG_NUM];
#define MSG_SORT_NONE LANG_TABLE_SELECT(MSG_SORT_NONE_LANG_TABLE)
extern const char* const MSG_SORT_TIME_LANG_TABLE[LANG_NUM];
#define MSG_SORT_TIME LANG_TABLE_SELECT(MSG_SORT_TIME_LANG_TABLE)
extern const char* const MSG_SPEED_LANG_TABLE[LANG_NUM];
#define MSG_SPEED LANG_TABLE_SELECT(MSG_SPEED_LANG_TABLE)
extern const char* const MSG_STACK_ERROR_LANG_TABLE[1];

623
Firmware/language_de.h
View File

@ -1,326 +1,331 @@
+/**
+ * German
+ *
+ * LCD Menu Messages
+ * Please note these are limited to 17 characters!
+ *
+ */
+
+#define(length = 20) WELCOME_MSG CUSTOM_MENDEL_NAME " bereit."
+ #define MSG_SD_INSERTED "SD eingesetzt"
+ #define MSG_SD_REMOVED "SD entfernt "
+ #define MSG_MAIN "Hauptmenue"
+ #define MSG_DISABLE_STEPPERS "Motoren aus"
+ #define MSG_AUTO_HOME "Startposition"
+ #define MSG_SET_HOME_OFFSETS "Abstand vom Ursprung einstellen"
+ #define MSG_SET_ORIGIN "Ursprung einstellen"
+ #define MSG_COOLDOWN "Abkuehlen"
+ #define MSG_SWITCH_PS_ON "Netzteil EIN"
+ #define MSG_SWITCH_PS_OFF "Netzteil AUS"
+ #define MSG_MOVE_AXIS "Achsbewegung"
+ #define MSG_MOVE_X "Bewege X"
+ #define MSG_MOVE_Y "Bewege Y"
+ #define MSG_MOVE_Z "Bewege Z"
+ #define MSG_MOVE_E "Extruder"
+ #define MSG_SPEED "Geschwindigkeit"
+ #define MSG_NOZZLE "Duese"
+ #define MSG_NOZZLE1 "Duese2"
+ #define MSG_NOZZLE2 "Duese3"
+ #define MSG_BED "Bed"
+ #define MSG_FAN_SPEED "Luefter-Tempo"
+ #define MSG_FLOW "Durchfluss"
+ #define MSG_FLOW0 "Durchfluss 0"
+ #define MSG_FLOW1 "Durchfluss 1"
+ #define MSG_FLOW2 "Durchfluss 2"
+ #define MSG_CONTROL "Kontrolle"
+ #define MSG_MIN " \002 Min"
+ #define MSG_MAX " \002 Max"
+ #define MSG_FACTOR " \002 Fakt"
+ #define MSG_TEMPERATURE "Temperatur"
+ #define MSG_MOTION "Bewegung"
+ #define MSG_VOLUMETRIC "Filament"
+ #define MSG_VOLUMETRIC_ENABLED "E in mm3"
+ #define MSG_STORE_EPROM "Abspeichern"
+ #define MSG_LOAD_EPROM "Lade Speicher"
+ #define MSG_RESTORE_FAILSAFE "Standardwerte setzen"
+ #define MSG_REFRESH "\xF8" "Erneuern"
+ #define MSG_WATCH "Information"
+ #define MSG_TUNE "Feineinstellung"
+ #define MSG_PAUSE_PRINT "Druck unterbrech."
+ #define MSG_RESUME_PRINT "Fortsetzen"
+ #define MSG_STOP_PRINT "Druck abbrechen"
+ #define MSG_CARD_MENU "Drucken von SD"
+ #define MSG_NO_CARD "Keine SD Karte"
+ #define MSG_DWELL "Einen Moment bitte."
+ #define MSG_USERWAIT "Warte auf user..."
+ #define MSG_RESUMING "Druck fortgesetzt"
+ #define(length = 20) MSG_PRINT_ABORTED "Druck abgebrochen"
+ #define MSG_NO_MOVE "Keine Bewegung."
+ #define MSG_KILLED "ABGEBROCHEN. "
+ #define MSG_STOPPED "GESTOPPT. "
+ #define MSG_FILAMENTCHANGE "Filament-Wechsel"
+ #define MSG_INIT_SDCARD "Init SD Karte"
+ #define MSG_CNG_SDCARD "Wechsel SD Karte"
+ #define MSG_BABYSTEP_X "Babystep X"
+ #define MSG_BABYSTEP_Y "Babystep Y"
+ #define MSG_BABYSTEP_Z "Z einstellen"
+ #define MSG_ADJUSTZ "Auto Z einstellen?"
+ #define MSG_PICK_Z "Waehle Abdruck"
+
+#define MSG_SETTINGS "Einstellungen"
+ #define MSG_PREHEAT "Vorwaermen"
+ #define MSG_UNLOAD_FILAMENT "Filament entladen"
+ #define MSG_LOAD_FILAMENT "Filament laden"
+
+#define MSG_RECTRACT "Retract"
+ #define MSG_ERROR "FEHLER:"
+ #define(length = 20) MSG_PREHEAT_NOZZLE "Duese Vorwaermen"
+ #define MSG_SUPPORT "Support"
+ #define(length = 20) MSG_CORRECTLY "Wechsel ok?"
+ #define MSG_YES "Ja"
+ #define MSG_NO "Nein"
+ #define(length = 19) MSG_NOT_LOADED "Fil. nicht geladen"
+ #define MSG_NOT_COLOR "Farbe unklar"
+ #define(length = 20) MSG_LOADING_FILAMENT "Filament leadt"
+ #define(length = 20) MSG_PLEASE_WAIT "Bitte warten"
+ #define MSG_LOADING_COLOR "Lade Farbe"
+ #define MSG_CHANGE_SUCCESS "Wechsel erfolgr.!"
+ #define(length = 20) MSG_PRESS "und Knopf druecken"
+ #define(length = 20) MSG_INSERT_FILAMENT "Filament einlegen"
+ #define(length = 20) MSG_CHANGING_FILAMENT "Filament-Wechsel!"
+
+
+#define MSG_SILENT_MODE_ON "Mode [leise]"
+ #define MSG_SILENT_MODE_OFF "Mode [Hohe Leist]"
+ #define(length = 20) MSG_REBOOT "Zum Uebernehmen "
+ #define(length = 22) MSG_TAKE_EFFECT "Drucker neu starten"
+
+#define MSG_Enqueing "enqueuing \"
+ #define MSG_POWERUP "Einschalten"
+ #define MSG_CONFIGURATION_VER " Letztes Update:"
+ #define MSG_FREE_MEMORY " Freier Speicher: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_ERR_CHECKSUM_MISMATCH "Pruefsummenfehler, Letzte Zeile: " //Checksum Fehler, Letzte Zeile: "
+ #define MSG_ERR_NO_CHECKSUM "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " //Keine Checksum mit Zeilennummer, Letzte Zeile: "
+ #define MSG_BEGIN_FILE_LIST "Beginn Dateiliste"
+ #define MSG_END_FILE_LIST "Ende Dateiliste"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Falscher Extruder"
+ #define MSG_M105_INVALID_EXTRUDER "M105 Falscher Extruder"
+ #define MSG_M200_INVALID_EXTRUDER "M200 Falscher Extruder"
+ #define MSG_M218_INVALID_EXTRUDER "M218 Falscher Extruder"
+ #define MSG_M221_INVALID_EXTRUDER "M221 Falscher Extruder"
+ #define MSG_ERR_NO_THERMISTORS "Keine Thermistoren - keine Temperatur"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Falscher Extruder"
+ #define MSG_HEATING "Aufwaermen"
+ #define(length = 20) MSG_HEATING_COMPLETE "Aufwaermen OK"
+ #define MSG_BED_HEATING "Bed aufwaermen"
+ #define MSG_BED_DONE "Bed OK"
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+ #define MSG_ERR_KILLED "Printer gestoppt. kill() aufgerufen!"
+ #define MSG_ERR_STOPPED "Drucker aufgrund von Fehlern gestoppt. Fehler beheben und mit M999 neu starten. (Temperatur wird zurueckgesetzt. Nach dem Neustart neu einstellen!)"
+ #define MSG_RESEND "Wiederholen: "
+ #define MSG_M119_REPORT "Statusbericht Endanschlag"
+ #define MSG_ENDSTOP_HIT "AUSGELOEST"
+ #define MSG_ENDSTOP_OPEN "offen"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "Kann Unterverz. nicht oeffnen"
+ #define MSG_SD_INIT_FAIL "SD Init fehlerhaft"
+ #define MSG_SD_VOL_INIT_FAIL "Dateisystem Init fehlerhaft"
+ #define MSG_SD_OPENROOT_FAIL "Zugriff auf Basisverzeichnis misslungen"
+ #define MSG_SD_CARD_OK "SD Karte ok"
+ #define MSG_SD_WORKDIR_FAIL "Oeffnen Arbeitsverzeichnis misslungen"
+ #define MSG_SD_OPEN_FILE_FAIL "Fehler beim Oeffnen der Datei: "
+ #define MSG_SD_FILE_OPENED "Datei geoeffnet: "
+ #define MSG_SD_FILE_SELECTED "Datei ausgewaehlt"
+ #define MSG_SD_WRITE_TO_FILE "Schreiben der Datei: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Kein SD Print"
+ #define MSG_SD_ERR_WRITE_TO_FILE "Fehler beim Schreiben in Datei"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Zugangsproblem Unterverzeichnis: "
+ #define MSG_STEPPER_TOO_HIGH "Schrittrate zu hoch"
+ #define MSG_ENDSTOPS_HIT "Endanschlag erreicht"
+ #define MSG_ERR_COLD_EXTRUDE_STOP "Stopp, Extruder kalt!"
+ #define MSG_BABYSTEPPING_X "Babystepping X"
+ #define MSG_BABYSTEPPING_Y "Babystepping Y"
+ #define MSG_BABYSTEPPING_Z "Z wurde eingestellt"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Menuestruktur fehlerhaft"
+
+#define MSG_LANGUAGE_NAME "Deutsch"
+ #define MSG_LANGUAGE_SELECT "Waehle Sprache"
+ #define MSG_PRUSA3D "prusa3d.com"
+ #define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
+ #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+
+#define MSG_SELFTEST_ERROR "Selbtest Fehler!"
+ #define MSG_SELFTEST_PLEASECHECK "Bitte pruefe:"
+ #define MSG_SELFTEST_NOTCONNECTED "Nicht angeschlossen"
+ #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
+ #define MSG_SELFTEST_BEDHEATER "Bed / Heater"
+ #define MSG_SELFTEST_WIRINGERROR "Verdrahtungfehler"
+ #define MSG_SELFTEST_ENDSTOPS "Endschalter"
+ #define MSG_SELFTEST_MOTOR "Motor"
+ #define MSG_SELFTEST_ENDSTOP "Endstop"
+ #define MSG_SELFTEST_ENDSTOP_NOTHIT "Ende nicht getrof."
+ #define MSG_SELFTEST_OK "Selbsttest OK"
+ #define MSG_LOOSE_PULLEY "Lose Riemenscheibe"
+
+#define MSG_SELFTEST_FAN "Lueftertest"
+#define(length = 20) MSG_SELFTEST_COOLING_FAN "Vorderer Luefter?"
+#define(length = 20) MSG_SELFTEST_EXTRUDER_FAN "Linker Luefter?"
+#define MSG_SELFTEST_FAN_YES "Dreht"
+#define MSG_SELFTEST_FAN_NO "Dreht nicht"
+
+#define(length = 20) MSG_STATS_TOTALFILAMENT "Gesamtfilament:"
+ #define(length = 20) MSG_STATS_TOTALPRINTTIME "Totale Druckzeit:"
+ #define(length = 20) MSG_STATS_FILAMENTUSED "Filamentverbrauch:"
+ #define(length = 20) MSG_STATS_PRINTTIME "Druckzeit: "
+ #define(length = 20) MSG_SELFTEST_START "Selbsttest start "
+ #define(length = 20) MSG_SELFTEST_CHECK_ENDSTOPS "Pruefe Endschalter "
+ #define(length = 20) MSG_SELFTEST_CHECK_HOTEND "Pruefe Hotend"
+ #define(length = 20) MSG_SELFTEST_CHECK_X "Pruefe X Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_Y "Pruefe Y Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_Z "Pruefe Z Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_BED "Pr\x81fe Bed "
+ #define(length = 20) MSG_SELFTEST_CHECK_ALLCORRECT "Alles richtig "
+ #define MSG_SELFTEST "Selbsttest "
+ #define(length = 20) MSG_SELFTEST_FAILED "Selbsttest misslung."
+ #define MSG_STATISTICS "Statistiken "
+ #define MSG_USB_PRINTING "Drucken ueber USB"
+ #define MSG_HOMEYZ "Kalibrieren Z"
+ #define MSG_HOMEYZ_PROGRESS "Kalibriere Z"
+ #define MSG_HOMEYZ_DONE "Kalibrierung OK"
+
+#define MSG_SHOW_END_STOPS "Endschalter Stat."
+ #define MSG_CALIBRATE_BED "Kalibrierung XYZ"
+ #define MSG_CALIBRATE_BED_RESET "Reset XYZ Kalibr."
+
/**
* German
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
+#define(length = 20, lines = 8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben."
+ #define(length = 20, lines = 8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben."
+
#define WELCOME_MSG CUSTOM_MENDEL_NAME " bereit."
#define MSG_SD_INSERTED "SD eingesetzt"
#define MSG_SD_REMOVED "SD entfernt "
#define MSG_MAIN "Hauptmenue"
#define MSG_DISABLE_STEPPERS "Motoren aus"
#define MSG_AUTO_HOME "Startposition"
#define MSG_SET_HOME_OFFSETS "Setze Homeversatz"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_COOLDOWN "Abkuehlen"
#define MSG_SWITCH_PS_ON "Netzteil EIN"
#define MSG_SWITCH_PS_OFF "Netzteil AUS"
#define MSG_MOVE_AXIS "Bewege Achse"
#define MSG_MOVE_X "Bewege X"
#define MSG_MOVE_Y "Bewege Y"
#define MSG_MOVE_Z "Bewege Z"
#define MSG_MOVE_E "Extruder"
#define MSG_SPEED "Geschwindigkeit"
#define MSG_NOZZLE "Duese"
#define MSG_NOZZLE1 "Duese2"
#define MSG_NOZZLE2 "Duese3"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Luefter-Tempo"
#define MSG_FLOW "Durchfluss"
#define MSG_FLOW0 "Durchfluss 0"
#define MSG_FLOW1 "Durchfluss 1"
#define MSG_FLOW2 "Durchfluss 2"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fakt"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_STORE_EPROM "EEPROM speichern"
#define MSG_LOAD_EPROM "EEPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardwerte setzen"
#define MSG_REFRESH "Aktualisieren"
#define MSG_WATCH "Information"
#define MSG_TUNE "Feineinstellung"
#define MSG_PAUSE_PRINT "Pause"
#define MSG_RESUME_PRINT "Fortsetzen"
#define MSG_STOP_PRINT "Druck abbrechen"
#define MSG_CARD_MENU "Drucken von SD"
#define MSG_NO_CARD "Keine SD Karte"
#define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer..."
#define MSG_RESUMING "Druck fortgesetzt"
#define MSG_PRINT_ABORTED "Druck abgebrochen"
#define MSG_NO_MOVE "Keine Bewegung."
#define MSG_KILLED "ABGEBROCHEN. "
#define MSG_STOPPED "GESTOPPT. "
#define MSG_FILAMENTCHANGE "Filament-Wechsel"
#define MSG_INIT_SDCARD "SD erkennen"
#define MSG_CNG_SDCARD "SD wechseln"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Live Z einstellen"
#define MSG_ADJUSTZ "Auto Z einstellen?"
#define MSG_PICK_Z "Waehle Druck"
+#define(length = 20, lines = 8) MSG_CONFIRM_NOZZLE_CLEAN "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber."
+ #define(length = 20, lines = 2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Ist der Schlitten ganz oben?"
+
+#define(length = 60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Suchen Bed Kalibrierpunkt"
+ #define(length = 14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " von 4"
+ #define(length = 60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Verbesserung Bed Kalibrierpunkt"
+ #define(length = 14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " von 9"
+ #define(length = 60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Messen der Referenzhoehe des Kalibrierpunktes"
+ #define(length = 14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " von 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
+
+#define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ-Kalibrierung fehlgeschlagen. Bed-Kalibrierpunkt nicht gefunden."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
#define MSG_SETTINGS "Einstellungen"
#define MSG_PREHEAT "Vorwaermen"
#define MSG_UNLOAD_FILAMENT "Filament entnehmen"
#define MSG_LOAD_FILAMENT "Filament laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filament 1 entnehmen"
#define MSG_UNLOAD_FILAMENT_2 "Filament 2 entnehmen"
#define MSG_UNLOAD_FILAMENT_3 "Filament 3 entnehmen"
#define MSG_UNLOAD_FILAMENT_4 "Filament 4 entnehmen"
#define MSG_UNLOAD_ALL "Alle entnehmen"
#define MSG_LOAD_ALL "Alle laden"
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne."
+
+#define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_POINT_LOW "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset"
+ #define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset."
+ #define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset."
+
+#define(length = 20, lines = 2) MSG_NEW_FIRMWARE_AVAILABLE "Neue Firmware Version verfuegbar:"
+ #define(length = 20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Bitte aktualisieren."
+
+ #define(length = 20, lines = 8) MSG_FOLLOW_CALIBRATION_FLOW "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel First steps, Abschnitt Calibration flow."
+ #define(length = 20, lines = 12) MSG_BABYSTEP_Z_NOT_SET "Der Abstand zwischen der Spitze der Duese und der Bed ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration."
+
+
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T0 "Filament in extruder 1 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T1 "Filament in extruder 2 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T2 "Filament in extruder 3 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T3 "Filament in extruder 4 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 1) MSG_CHANGE_EXTR "Wechsel extruder"
+
#define MSG_RECTRACT "Retract"
#define MSG_ERROR "FEHLER:"
#define MSG_PREHEAT_NOZZLE "Duese vorwaermen!"
#define MSG_SUPPORT "Support"
#define MSG_CORRECTLY "Wechsel ok?"
#define MSG_YES "Ja"
#define MSG_NO "Nein"
#define MSG_NOT_LOADED "Fil. nicht geladen"
#define MSG_NOT_COLOR "Farbe nicht klar."
#define MSG_LOADING_FILAMENT "Filament laedt"
#define MSG_PLEASE_WAIT "Bitte warten"
#define MSG_LOADING_COLOR "Lade Farbe"
#define MSG_CHANGE_SUCCESS "Wechsel erfolgreich!"
#define MSG_PRESS "und Knopf druecken"
#define MSG_INSERT_FILAMENT "Filament einlegen"
#define MSG_CHANGING_FILAMENT "Filament-Wechsel!"
+ #define(length = 20, lines = 4) MSG_FIL_ADJUSTING "Filament positionieren. Bitte warten."
+ #define(length = 20, lines = 8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig."
+
+ #define(length = 20, lines = 1) MSG_CALIBRATE_E "Kalibriere E"
+//#define(length=20, lines=1) "Reset E Cal."
#define MSG_SILENT_MODE_ON "Mode [leise]"
#define MSG_SILENT_MODE_OFF "Mode [Hohe Leist]"
#define MSG_REBOOT "Reboot den Drucker"
#define MSG_TAKE_EFFECT " um wirksam zu werden"
+#define(length = 20, lines = 8) MSG_E_CAL_KNOB "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig."
+
+//#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
#define MSG_Enqueing "enqueuing \"
#define MSG_POWERUP "Einschalten"
#define MSG_CONFIGURATION_VER " Letzes Updated: "
#define MSG_FREE_MEMORY " Freier Speicher: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "Pruefsummenfehler, Letzte Zeile: " //Checksum Fehler, Letzte Zeile: "
#define MSG_ERR_NO_CHECKSUM "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " //Keine Checksum mit Zeilennummer, Letzte Zeile: "
#define MSG_BEGIN_FILE_LIST "Beginn Dateiliste"
#define MSG_END_FILE_LIST "Ende Dateiliste"
#define MSG_M104_INVALID_EXTRUDER "M104 Falscher Extruder"
#define MSG_M105_INVALID_EXTRUDER "M105 Falscher Extruder"
#define MSG_M200_INVALID_EXTRUDER "M200 Falscher Extruder"
#define MSG_M218_INVALID_EXTRUDER "M218 Falscher Extruder"
#define MSG_M221_INVALID_EXTRUDER "M221 Falscher Extruder"
#define MSG_ERR_NO_THERMISTORS "Keine Temp.sensoren - keine Temperatur"
#define MSG_M109_INVALID_EXTRUDER "M109 Falscher Extruder"
#define MSG_HEATING "Aufwaermen"
#define MSG_HEATING_COMPLETE "Aufwaermen OK"
#define MSG_BED_HEATING "Bett aufwaermen"
#define MSG_BED_DONE "Bett OK"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED "Drucker gestoppt. kill() aufgerufen!"
#define MSG_ERR_STOPPED "Der Drucker wurde aufgrund von Fehlern gestoppt. Beheben Sie den Fehler und verwenden Sie M999, um neu zu starten. (Temperatur wird reset. Stellen Sie es nach dem Neustart ein)"
#define MSG_RESEND "Wiederholen: "
#define MSG_M119_REPORT "Endstop status anzeigen"
#define MSG_ENDSTOP_HIT "AUSGELOEST"
#define MSG_ENDSTOP_OPEN "offen"
+#define(length = 20, lines = 8) MSG_MARK_FIL "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig."
+ #define(length = 20, lines = 8) MSG_CLEAN_NOZZLE_E "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."
+ #define(length = 20, lines = 3) MSG_WAITING_TEMP "Warten auf Abkuehlung von Heater und Bed."
#define MSG_SD_CANT_OPEN_SUBDIR "Kann Unterverz. nicht oeffnen"
#define MSG_SD_INIT_FAIL "SD Init fehlerhaft"
#define MSG_SD_VOL_INIT_FAIL "Dateisystem Init fehlerhaft"
#define MSG_SD_OPENROOT_FAIL "Zugriff auf Basisverzeichnis misslungen"
#define MSG_SD_CARD_OK "SD Karte ok"
#define MSG_SD_WORKDIR_FAIL "Oeffnen Arbeitsverzeichnis misslungen"
#define MSG_SD_OPEN_FILE_FAIL "Fehler beim Oeffnen der Datei: "
#define MSG_SD_FILE_OPENED "Datei geoeffnet: "
#define MSG_SD_FILE_SELECTED "Datei ausgewaehlt"
#define MSG_SD_WRITE_TO_FILE "Schreiben in Datei: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Kein SD Druck"
#define MSG_SD_ERR_WRITE_TO_FILE "Fehler beim Schreiben in Datei"
#define MSG_SD_CANT_ENTER_SUBDIR "Zugangsproblem Unterverzeichnis: "
#define MSG_STEPPER_TOO_HIGH "Schrittrate zu hoch"
#define MSG_ENDSTOPS_HIT "Endanstop erreicht"
#define MSG_ERR_COLD_EXTRUDE_STOP "Stop, Extruder kalt!"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Z wurde eingestellt"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Menuestruktur fehlerhaft"
+ #define(length = 20, lines = 2) MSG_FILAMENT_CLEAN "Ist Farbe rein?"
+ #define(lenght = 20, lines = 1) MSG_UNLOADING_FILAMENT "Filament auswerfen"
+ #define(length = 20, lines = 8) MSG_PAPER "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten"
+
+#define MSG_BED_CORRECTION_MENU "Bed level Korrekt"
#define MSG_LANGUAGE_NAME "Deutsch"
#define MSG_LANGUAGE_SELECT "Waehle Sprache"
#define MSG_PRUSA3D "prusa3d.com"
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+ #define MSG_BED_CORRECTION_LEFT "Links [um]"
+ #define MSG_BED_CORRECTION_RIGHT "Rechts [um]"
+ #define MSG_BED_CORRECTION_FRONT "Vorne [um]"
+ #define MSG_BED_CORRECTION_REAR "Hinten [um]"
+ #define MSG_BED_CORRECTION_RESET "Ruecksetzen"
+
+#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
+ #define MSG_MENU_CALIBRATION "Kalibrierung"
#define MSG_SELFTEST_ERROR "Selbsttest Fehler !"
#define MSG_SELFTEST_PLEASECHECK "Bitte pruefe:"
#define MSG_SELFTEST_NOTCONNECTED "Nicht angeschlossen"
#define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
#define MSG_SELFTEST_BEDHEATER "Bed / Heater"
#define MSG_SELFTEST_WIRINGERROR "Verdrahtungsfehler"
#define MSG_SELFTEST_ENDSTOPS "Endschalter"
#define MSG_SELFTEST_MOTOR "Motor"
#define MSG_SELFTEST_ENDSTOP "Endstop"
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Endsch. n. erreicht"
#define MSG_SELFTEST_OK "Selbsttest OK"
#define MSG_LOOSE_PULLEY "Loser pulley"
+ #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD Karte [normal]"
+ #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD Karte [FlashAir]"
#define MSG_SELFTEST_FAN "Lueftertest";
#define MSG_SELFTEST_COOLING_FAN "Vorderer Luefter?";
#define MSG_SELFTEST_EXTRUDER_FAN "Linker Luefter?";
#define MSG_SELFTEST_FAN_YES "Dreht";
#define MSG_SELFTEST_FAN_NO "Dreht nicht";
#define MSG_FINISHING_MOVEMENTS "Bewegung beenden"
#define MSG_PRINT_PAUSED "Druck pausiert"
#define MSG_RESUMING_PRINT "Druck weitergehen"
#define MSG_PID_EXTRUDER "PID Kalibrierung"
#define MSG_SET_TEMPERATURE "Temp. einsetzen"
#define MSG_PID_FINISHED "PID Kalib. fertig"
#define MSG_PID_RUNNING "PID Kalib."
#define MSG_STATS_TOTALFILAMENT "Filament Gesamt:"
#define MSG_STATS_TOTALPRINTTIME "Totale Druckzeit:"
#define MSG_STATS_FILAMENTUSED "Filamentverbrauch:"
#define MSG_STATS_PRINTTIME "Druckzeit: "
#define MSG_SELFTEST_START "Selbsttest start "
#define MSG_SELFTEST_CHECK_ENDSTOPS "Pruefe Endschalter "
#define MSG_SELFTEST_CHECK_HOTEND "Pruefe Hotend"
#define MSG_SELFTEST_CHECK_X "Pruefe X Achse "
#define MSG_SELFTEST_CHECK_Y "Pruefe Y Achse "
#define MSG_SELFTEST_CHECK_Z "Pruefe Z Achse "
#define MSG_SELFTEST_CHECK_BED "Pruefe Bett "
#define MSG_SELFTEST_CHECK_ALLCORRECT "Alles richtig "
#define MSG_SELFTEST "Selbsttest "
#define MSG_SELFTEST_FAILED "Selbsttest misluekt"
#define MSG_STATISTICS "Statistiken "
#define MSG_USB_PRINTING "Drucken ueber USB"
#define MSG_HOMEYZ "Kalibrieren Z"
#define MSG_HOMEYZ_PROGRESS "Kalibriere Z"
#define MSG_HOMEYZ_DONE "Kalibrierung OK"
#define MSG_CALIBRATE_PINDA "Kalibrieren"
#define MSG_CALIBRATION_PINDA_MENU "Temp. kalibrieren"
#define MSG_PINDA_NOT_CALIBRATED "Temperatur wurde nicht kalibriert"
#define MSG_PINDA_PREHEAT "PINDA erwaermen"
#define MSG_TEMP_CALIBRATION "Temp Kalib. "
#define MSG_TEMP_CALIBRATION_DONE "Temp. Kalibrierung fertig. Klicken um weiter zu gehen."
#define MSG_TEMP_CALIBRATION_ON "Temp. Kal. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "Temp. Kal. [OFF]"
#define MSG_SHOW_END_STOPS "Anzeigen Enschalter"
#define MSG_CALIBRATE_BED "Kalibrierung XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ Kalibr."
#define MSG_LOAD_ALL "Alle laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
#define MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
#define MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
#define MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
#define MSG_UNLOAD_ALL "Alles entladen"
#define MSG_PREPARE_FILAMENT "Filam. bereithalten"
#define MSG_ALL "Alle"
#define MSG_USED "Beim Druck benutzte"
#define MSG_CURRENT "Aktuelles"
#define MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
#define MSG_EXTRUDER "Extruder"
#define MSG_EXTRUDER_1 "Extruder 1"
#define MSG_EXTRUDER_2 "Extruder 2"
#define MSG_EXTRUDER_3 "Extruder 3"
#define MSG_EXTRUDER_4 "Extruder 4"
#define MSG_DATE "Datum"
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrieren von XYZ. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrieren von Z. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind."
#define MSG_CONFIRM_NOZZLE_CLEAN "Bitte reinigen Sie die Duese vor Kalibrierung. Klicken wenn sauber."
#define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Sind beide Z Schlitten ganz oben?"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Suche Bett Kalibrierpunkt"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " von 4"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Genauigkeit verbessern bei Kalibrierpunkt"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " von 9"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Messen der Referenzhoehe des Kalibrierpunktes"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " von 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Wiederholung "
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ-Kalibrierung ok. X/Y-Achsen sind etwas schief. Schiefheit wird automatisch korrigiert. Gut gemacht!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ-Kalibrierung ok. X/Y-Achsen sind sehr schief. Schiefheit wird automatisch korrigiert."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ-Kalibrierung fehlgeschlagen. Linker voderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte nicht erreichbar."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Bett-Nivellierung fehlgeschlagen. Sensor wurde nicht ausgeloest. Schmutzige Duese? Warte auf Reset."
#define MSG_BED_LEVELING_FAILED_POINT_HIGH "Bett-Nivellierung fehlgeschlagen. Sensor wurde zu hoch ausgeloest. Warte auf Reset."
#define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bett-Nivellierung fehlgeschlagen. Sensor nicht angeschlossen oder Kabel defekt. Warte auf Reset."
#define MSG_NEW_FIRMWARE_AVAILABLE "Neue Firmware Version verfuegbar:"
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Bitte aktualisieren."
#define MSG_FOLLOW_CALIBRATION_FLOW "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel First steps, Abschnitt Calibration flow."
#define MSG_BABYSTEP_Z_NOT_SET "Der Abstand zwischen der Spitze der Duese und der Druckoberflaeche / Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, Abschnitt First layer calibration."
#define MSG_FILAMENT_LOADING_T0 "Filament in extruder 1 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T1 "Filament in extruder 2 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T2 "Filament in extruder 3 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T3 "Filament in extruder 4 einlegen. Klicken wenn fertig."
#define MSG_CHANGE_EXTR "Wechsel extruder"
#define MSG_FIL_ADJUSTING "Einstellen Filament. Bitte warten."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn sauber."
#define MSG_CALIBRATE_E "Kalibriere E"
//#define MSG_RESET_CALIBRATE_E "Reset E Cal."
#define MSG_E_CAL_KNOB "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig."
//#define MSG_FARM_CARD_MENU "Farm mode print"
#define MSG_MARK_FIL "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig."
#define MSG_CLEAN_NOZZLE_E "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."
#define MSG_WAITING_TEMP "Warten auf Abkuehlung von Duese und Bett."
#define MSG_FILAMENT_CLEAN "Ist Farbe rein?"
#define MSG_UNLOADING_FILAMENT "Filament auswerfen"
#define MSG_PAPER "Lege waehrend der Kalibrierung der ersten 4 Punkte ein Blatt Papier unter die Duese. Wenn die Duese das Papier bewegt, Drucker sofort ausschalten!"
#define MSG_BED_CORRECTION_MENU "Bett level korrekt"
#define MSG_BED_CORRECTION_LEFT "Links [um]"
#define MSG_BED_CORRECTION_RIGHT "Rechts [um]"
#define MSG_BED_CORRECTION_FRONT "Vorne [um]"
#define MSG_BED_CORRECTION_REAR "Hinten [um]"
#define MSG_BED_CORRECTION_RESET "Zuruecksetzen"
#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
#define MSG_MENU_CALIBRATION "Kalibrierung"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD Karte [normal]"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD Karte [FlashAir]"
#define MSG_PRINTER_DISCONNECTED "Drucker getrent"
#define MSG_FINISHING_MOVEMENTS "Bewegungen beenden"
#define MSG_PRINT_PAUSED "Druck pausiert"
#define MSG_RESUMING_PRINT "Druck fortsetzen"
#define MSG_PID_EXTRUDER "PID Kalibrierung"
#define MSG_SET_TEMPERATURE "Temp.einstellen"
#define MSG_PID_FINISHED "PID Kal. fertig "
#define MSG_PID_RUNNING "PID Kal. "
#define MSG_CALIBRATE_PINDA "PINDA Temp. Kal."
#define MSG_CALIBRATION_PINDA_MENU "PINDA Temp. Kal."
#define MSG_PINDA_NOT_CALIBRATED "PINDA Temperatur Kalibrierung wurde noch nicht ausgefuehrt"
#define MSG_PINDA_PREHEAT "PINDA erwaermen"
#define MSG_TEMP_CALIBRATION "PINDA Temp.Kal. "
#define MSG_TEMP_CALIBRATION_DONE "Die PINDA Temperaturkalibrierung ist beendet. Klicke um fortzufahren."
#define MSG_TEMP_CALIBRATION_ON "PINDA T.Kal. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "PINDA T.Kal.[OFF]"
#define MSG_LOAD_ALL "Alle laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
#define MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
#define MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
#define MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
#define MSG_UNLOAD_ALL "Alles entladen"
#define MSG_PREPARE_FILAMENT "Filam. bereithalten"
#define MSG_ALL "Alle"
#define MSG_USED "Benutzt beim Druck"
#define MSG_CURRENT "Aktuelles"
#define MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
#define MSG_EXTRUDER "Extruder"
#define MSG_EXTRUDER_1 "Extruder 1"
#define MSG_EXTRUDER_2 "Extruder 2"
#define MSG_EXTRUDER_3 "Extruder 3"
#define MSG_EXTRUDER_4 "Extruder 4"
#define MSG_DATE "Datum:"
#define MSG_XYZ_DETAILS "XYZ Kal. Details"
#define MSG_Y_DISTANCE_FROM_MIN "Y Entfernung vom min"
#define MSG_Y_DISTANCE_FROM_MIN "Y Entfernung von min"
#define MSG_LEFT "Links:"
#define MSG_CENTER "Mitte:"
#define MSG_RIGHT "Rechts:"
#define MSG_MEASURED_SKEW "Schraeglauf:"
#define MSG_SLIGHT_SKEW "Leichter Schr.:"
#define MSG_SEVERE_SKEW "Schwerer Schr.:"
#define MSG_MEASURED_SKEW "Symmetrie:"
#define MSG_SLIGHT_SKEW "Geringe Asym.:"
#define MSG_SEVERE_SKEW "Schwere Asym.:"
#define MSG_DEFAULT_SETTINGS_LOADED "Standardeinstellungen geladen"
#define MSG_SORT_TIME "Sort: [Zeit]"
#define MSG_SORT_ALPHA "Sort: [Alphabet]"
#define MSG_SORT_NONE "Sort: [Keine]"
#define MSG_SORTING "Sortiere Dateien"

87
Firmware/language_en.h
View File

@ -7,10 +7,10 @@
*/
#define(length=20) WELCOME_MSG CUSTOM_MENDEL_NAME " ready."
#define MSG_SD_INSERTED "Card inserted"
#define(length=20) MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main"
#define MSG_DISABLE_STEPPERS "Disable steppers"
#define(length=20) MSG_DISABLE_STEPPERS "Disable steppers"
#define MSG_AUTO_HOME "Auto home"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
@ -27,7 +27,7 @@
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
#define(length=14) MSG_FAN_SPEED "Fan speed"
#define(length=20) MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1"
@ -52,11 +52,11 @@
#define MSG_CARD_MENU "Print from SD"
#define MSG_NO_CARD "No SD card"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_RESUMING "Resuming print"
#define(length=20) MSG_USERWAIT "Wait for user..."
#define(length=20) MSG_RESUMING "Resuming print"
#define(length=20) MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. "
#define(length=20) MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD card"
@ -64,23 +64,23 @@
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Live adjust Z"
#define MSG_ADJUSTZ "Auto adjust Z?"
#define MSG_PICK_Z "Pick print"
#define(length=20) MSG_ADJUSTZ "Auto adjust Z?"
#define(length=20) MSG_PICK_Z "Pick print"
#define MSG_SETTINGS "Settings"
#define MSG_PREHEAT "Preheat"
#define(length=17) MSG_UNLOAD_FILAMENT "Unload filament"
#define(length=17) MSG_LOAD_FILAMENT "Load filament"
#define(length=17) MSG_LOAD_FILAMENT_1 "Load filament 1"
#define(length=17) MSG_LOAD_FILAMENT_2 "Load filament 2"
#define(length=17) MSG_LOAD_FILAMENT_3 "Load filament 3"
#define(length=17) MSG_LOAD_FILAMENT_4 "Load filament 4"
#define(length=17) MSG_UNLOAD_FILAMENT_1 "Unload filament 1"
#define(length=17) MSG_UNLOAD_FILAMENT_2 "Unload filament 2"
#define(length=17) MSG_UNLOAD_FILAMENT_3 "Unload filament 3"
#define(length=17) MSG_UNLOAD_FILAMENT_4 "Unload filament 4"
#define MSG_UNLOAD_ALL "Unload all"
#define MSG_LOAD_ALL "Load all"
#define(length=20) MSG_UNLOAD_FILAMENT "Unload filament"
#define(length=20) MSG_LOAD_FILAMENT "Load filament"
#define(length=20) MSG_LOAD_FILAMENT_1 "Load filament 1"
#define(length=20) MSG_LOAD_FILAMENT_2 "Load filament 2"
#define(length=20) MSG_LOAD_FILAMENT_3 "Load filament 3"
#define(length=20) MSG_LOAD_FILAMENT_4 "Load filament 4"
#define(length=20) MSG_UNLOAD_FILAMENT_1 "Unload filament 1"
#define(length=20) MSG_UNLOAD_FILAMENT_2 "Unload filament 2"
#define(length=20) MSG_UNLOAD_FILAMENT_3 "Unload filament 3"
#define(length=20) MSG_UNLOAD_FILAMENT_4 "Unload filament 4"
#define(length=20) MSG_UNLOAD_ALL "Unload all"
#define(length=20) MSG_LOAD_ALL "Load all"
#define MSG_RECTRACT "Rectract"
@ -91,11 +91,11 @@
#define MSG_YES "Yes"
#define MSG_NO "No"
#define(length=19) MSG_NOT_LOADED "Filament not loaded"
#define MSG_NOT_COLOR "Color not clear"
#define(length=20) MSG_NOT_COLOR "Color not clear"
#define(length=20) MSG_LOADING_FILAMENT "Loading filament"
#define(length=20) MSG_PLEASE_WAIT "Please wait"
#define MSG_LOADING_COLOR "Loading color"
#define MSG_CHANGE_SUCCESS "Change success!"
#define(length=20) MSG_CHANGE_SUCCESS "Change success!"
#define(length=20) MSG_PRESS "and press the knob"
#define(length=20) MSG_INSERT_FILAMENT "Insert filament"
#define(length=20) MSG_CHANGING_FILAMENT "Changing filament!"
@ -104,7 +104,7 @@
#define MSG_SILENT_MODE_ON "Mode [silent]"
#define MSG_SILENT_MODE_OFF "Mode [high power]"
#define(length=20) MSG_REBOOT "Reboot the printer"
#define(length=20) MSG_TAKE_EFFECT " for take effect"
#define(length=20, lines=2) MSG_TAKE_EFFECT " for take effect"
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
@ -164,12 +164,12 @@
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
#define MSG_SELFTEST_ERROR "Selftest error !"
#define(length=20) MSG_SELFTEST_ERROR "Selftest error !"
#define MSG_SELFTEST_PLEASECHECK "Please check :"
#define MSG_SELFTEST_NOTCONNECTED "Not connected"
#define(length=20) MSG_SELFTEST_NOTCONNECTED "Not connected"
#define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
#define MSG_SELFTEST_BEDHEATER "Bed / Heater"
#define MSG_SELFTEST_WIRINGERROR "Wiring error"
#define(length=20) MSG_SELFTEST_WIRINGERROR "Wiring error"
#define MSG_SELFTEST_ENDSTOPS "Endstops"
#define MSG_SELFTEST_MOTOR "Motor"
#define MSG_SELFTEST_ENDSTOP "Endstop"
@ -181,7 +181,7 @@
#define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?";
#define MSG_SELFTEST_FAN_YES "Spinning";
#define MSG_SELFTEST_FAN_NO "Not spinning";
#define(length=20) MSG_SELFTEST_FAN_NO "Not spinning";
#define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :"
#define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"
@ -203,7 +203,7 @@
#define MSG_HOMEYZ_PROGRESS "Calibrating Z"
#define MSG_HOMEYZ_DONE "Calibration done"
#define(length=17,lines=1) MSG_SHOW_END_STOPS "Show end stops"
#define(length=20,lines=1) MSG_SHOW_END_STOPS "Show end stops"
#define MSG_CALIBRATE_BED "Calibrate XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
@ -233,9 +233,9 @@
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ calibration compromised. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ calibration compromised. Front calibration points not reachable."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
#define(length=20,lines=6) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
#define(length=20,lines=6) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset."
#define(length=20,lines=6) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
#define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE "New firmware version available:"
#define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Please upgrade."
@ -261,35 +261,35 @@
#define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
#define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling"
#define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
#define(lenght=18, lines=1) MSG_UNLOADING_FILAMENT "Unloading filament"
#define(length=20, lines=8) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
#define(length=20) MSG_UNLOADING_FILAMENT "Unloading filament"
#define(length=20, lines=10) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
#define MSG_BED_CORRECTION_MENU "Bed level correct"
#define(length=20) MSG_BED_CORRECTION_MENU "Bed level correct"
#define(length=14,lines=1) MSG_BED_CORRECTION_LEFT "Left side [um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_RIGHT "Right side[um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_FRONT "Front side[um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_REAR "Rear side [um]"
#define MSG_BED_CORRECTION_RESET "Reset"
#define(length=20) MSG_BED_CORRECTION_RESET "Reset"
#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
#define MSG_MENU_CALIBRATION "Calibration"
#define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
#define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define(length=20, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
#define(length=20, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define(length=20, lines=1) MSG_PRINTER_DISCONNECTED "Printer disconnected"
#define(length=20, lines=1) MSG_FINISHING_MOVEMENTS "Finishing movements"
#define(length=20, lines=1) MSG_PRINT_PAUSED "Print paused"
#define(length=20, lines=1) MSG_RESUMING_PRINT "Resuming print"
#define(length=17, lines=1) MSG_PID_EXTRUDER "PID calibration"
#define(length=19, lines=1) MSG_SET_TEMPERATURE "Set temperature:"
#define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished"
#define(length=20, lines=1) MSG_PID_EXTRUDER "PID calibration"
#define(length=20, lines=1) MSG_SET_TEMPERATURE "Set temperature:"
#define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished "
#define(length=20, lines=1) MSG_PID_RUNNING "PID cal. "
#define(length=17, lines=1) MSG_CALIBRATE_PINDA "Calibrate"
#define(length=17, lines=1) MSG_CALIBRATION_PINDA_MENU "Temp. calibration"
#define(length=20, lines=1) MSG_CALIBRATE_PINDA "Calibrate"
#define(length=20, lines=1) MSG_CALIBRATION_PINDA_MENU "Temp. calibration"
#define(length=20, lines=4) MSG_PINDA_NOT_CALIBRATED "Temperature calibration has not been run yet"
#define(length=20, lines=1) MSG_PINDA_PREHEAT "PINDA Heating"
#define(length=20, lines=1) MSG_TEMP_CALIBRATION "Temp. cal. "
#define(length=20, lines=4) MSG_TEMP_CALIBRATION_DONE "Temperature calibration is finished. Click to continue."
#define(length=20, lines=5) MSG_TEMP_CALIBRATION_DONE "Temperature calibration is finished. Click to continue."
#define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON "Temp. cal. [ON]"
#define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF "Temp. cal. [OFF]"
#define(length=20, lines=1) MSG_PREPARE_FILAMENT "Prepare new filament"
@ -340,3 +340,4 @@
#define MSG_WIZARD_INSERT_CORRECT_FILAMENT "Please load PLA filament and then resume Wizard by rebooting the printer."
#define MSG_PLA_FILAMENT_LOADED "Is PLA filament loaded?"
#define MSG_PLEASE_LOAD_PLA "Please load PLA filament first."
=======