MMU2/lang: Update translatable strings to match our extraction macros
This commit is contained in:
3d-gussner
parent
50b6044703
commit
89a03c1f0d
|
|
@ -115,185 +115,185 @@ static const constexpr uint16_t errorCodes[] PROGMEM = {
|
|||
};
|
||||
|
||||
// @@TODO some of the strings are duplicates, can be merged into one
|
||||
static const char titleFINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA DIDNT TRIGGER");
|
||||
static const char titleFINDA_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FINDA: FILAM. STUCK");
|
||||
static const char titleFSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FSENSOR DIDNT TRIGGER");
|
||||
static const char titleFSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FSENSOR: FIL. STUCK");
|
||||
static const char titlePULLEY_CANNOT_MOVE[] PROGMEM_I1 = ISTR("PULLEY CANNOT MOVE");
|
||||
static const char titleFSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("FSENSOR TOO EARLY");
|
||||
static const char titleSELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("SELECTOR CANNOT MOVE");
|
||||
static const char titleSELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("SELECTOR CANNOT HOME");
|
||||
static const char titleIDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("IDLER CANNOT MOVE");
|
||||
static const char titleIDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("IDLER CANNOT HOME");
|
||||
static const char titleTMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
|
||||
//static const char titleTMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
|
||||
//static const char titleTMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
|
||||
static const char titleTMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
||||
//static const char titleTMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
||||
//static const char titleTMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
||||
static const char titleTMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
||||
//static const char titleTMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
||||
//static const char titleTMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
||||
static const char titleTMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
||||
//static const char titleTMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
||||
//static const char titleTMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
||||
static const char titleTMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
|
||||
//static const char titleTMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
|
||||
//static const char titleTMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
|
||||
static const char titleTMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
||||
//static const char titleTMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
||||
//static const char titleTMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
||||
static const char titleMMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU NOT RESPONDING");
|
||||
static const char titleCOMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("COMMUNICATION ERROR");
|
||||
static const char titleFILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("FILAMENT ALREADY LOA");
|
||||
static const char titleINVALID_TOOL[] PROGMEM_I1 = ISTR("INVALID TOOL");
|
||||
static const char titleQUEUE_FULL[] PROGMEM_I1 = ISTR("QUEUE FULL");
|
||||
static const char titleFW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("MMU FW UPDATE NEEDED");
|
||||
static const char titleFW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("FW RUNTIME ERROR");
|
||||
static const char titleUNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("UNLOAD MANUALLY");
|
||||
static const char MSG_TITLE_FINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA DIDNT TRIGGER"); ////MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
|
||||
static const char MSG_TITLE_FINDA_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FINDA: FILAM. STUCK"); ////MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
|
||||
static const char MSG_TITLE_FSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FSENSOR DIDNT TRIGGER"); ////MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
|
||||
static const char MSG_TITLE_FSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FSENSOR: FIL. STUCK"); ////MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
|
||||
static const char MSG_TITLE_PULLEY_CANNOT_MOVE[] PROGMEM_I1 = ISTR("PULLEY CANNOT MOVE"); ////MSG_TITLE_PULLEY_CANNOT_MOVE c=20
|
||||
static const char MSG_TITLE_FSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("FSENSOR TOO EARLY"); ////MSG_TITLE_FSENSOR_TOO_EARLY c=20
|
||||
static const char MSG_TITLE_SELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("SELECTOR CANNOT MOVE"); ////MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
|
||||
static const char MSG_TITLE_SELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("SELECTOR CANNOT HOME"); ////MSG_TITLE_SELECTOR_CANNOT_HOME c=20
|
||||
static const char MSG_TITLE_IDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("IDLER CANNOT MOVE"); ////MSG_TITLE_IDLER_CANNOT_MOVE c=20
|
||||
static const char MSG_TITLE_IDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("IDLER CANNOT HOME"); ////MSG_TITLE_IDLER_CANNOT_HOME c=20
|
||||
static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT"); ////MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
|
||||
//static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT"); ////MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
|
||||
//static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
|
||||
static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR"); ////MSG_TITLE_TMC_OVERHEAT_ERROR c=20
|
||||
//static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
||||
//static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
|
||||
static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR"); ////MSG_TITLE_TMC_DRIVER_ERROR c=20
|
||||
//static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
||||
//static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
|
||||
static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET"); ////MSG_TITLE_TMC_DRIVER_RESET c=20
|
||||
//static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
||||
//static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
|
||||
static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR"); ////MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
|
||||
//static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
|
||||
//static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
|
||||
static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED"); ////MSG_TITLE_TMC_DRIVER_SHORTED c=20
|
||||
//static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
||||
//static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
|
||||
static const char MSG_TITLE_MMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU NOT RESPONDING"); ////MSG_TITLE_MMU_NOT_RESPONDING c=20
|
||||
static const char MSG_TITLE_COMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("COMMUNICATION ERROR"); ////MSG_TITLE_COMMUNICATION_ERROR c=20
|
||||
static const char MSG_TITLE_FILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("FILAMENT ALREADY LOA"); ////MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
|
||||
static const char MSG_TITLE_INVALID_TOOL[] PROGMEM_I1 = ISTR("INVALID TOOL"); ////MSG_TITLE_INVALID_TOOL c=20
|
||||
static const char MSG_TITLE_QUEUE_FULL[] PROGMEM_I1 = ISTR("QUEUE FULL"); ////MSG_TITLE_QUEUE_FULL c=20
|
||||
static const char MSG_TITLE_FW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("MMU FW UPDATE NEEDED"); ////MSG_TITLE_FW_UPDATE_NEEDED c=20
|
||||
static const char MSG_TITLE_FW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("FW RUNTIME ERROR"); ////MSG_TITLE_FW_RUNTIME_ERROR c=20
|
||||
static const char MSG_TITLE_UNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("UNLOAD MANUALLY"); ////MSG_TITLE_UNLOAD_MANUALLY c=20
|
||||
|
||||
static const char * const errorTitles [] PROGMEM = {
|
||||
titleFINDA_DIDNT_TRIGGER,
|
||||
titleFINDA_DIDNT_GO_OFF,
|
||||
titleFSENSOR_DIDNT_TRIGGER,
|
||||
titleFSENSOR_DIDNT_GO_OFF,
|
||||
titlePULLEY_CANNOT_MOVE,
|
||||
titleFSENSOR_TOO_EARLY,
|
||||
titleSELECTOR_CANNOT_HOME,
|
||||
titleSELECTOR_CANNOT_MOVE,
|
||||
titleIDLER_CANNOT_HOME,
|
||||
titleIDLER_CANNOT_MOVE,
|
||||
titleTMC_WARNING_TMC_TOO_HOT,
|
||||
titleTMC_WARNING_TMC_TOO_HOT,
|
||||
titleTMC_WARNING_TMC_TOO_HOT,
|
||||
titleTMC_OVERHEAT_ERROR,
|
||||
titleTMC_OVERHEAT_ERROR,
|
||||
titleTMC_OVERHEAT_ERROR,
|
||||
titleTMC_DRIVER_ERROR,
|
||||
titleTMC_DRIVER_ERROR,
|
||||
titleTMC_DRIVER_ERROR,
|
||||
titleTMC_DRIVER_RESET,
|
||||
titleTMC_DRIVER_RESET,
|
||||
titleTMC_DRIVER_RESET,
|
||||
titleTMC_UNDERVOLTAGE_ERROR,
|
||||
titleTMC_UNDERVOLTAGE_ERROR,
|
||||
titleTMC_UNDERVOLTAGE_ERROR,
|
||||
titleTMC_DRIVER_SHORTED,
|
||||
titleTMC_DRIVER_SHORTED,
|
||||
titleTMC_DRIVER_SHORTED,
|
||||
titleMMU_NOT_RESPONDING,
|
||||
titleCOMMUNICATION_ERROR,
|
||||
titleFILAMENT_ALREADY_LOADED,
|
||||
titleINVALID_TOOL,
|
||||
titleQUEUE_FULL,
|
||||
titleFW_UPDATE_NEEDED,
|
||||
titleFW_RUNTIME_ERROR,
|
||||
titleUNLOAD_MANUALLY
|
||||
_R(MSG_TITLE_FINDA_DIDNT_TRIGGER),
|
||||
_R(MSG_TITLE_FINDA_DIDNT_GO_OFF),
|
||||
_R(MSG_TITLE_FSENSOR_DIDNT_TRIGGER),
|
||||
_R(MSG_TITLE_FSENSOR_DIDNT_GO_OFF),
|
||||
_R(MSG_TITLE_PULLEY_CANNOT_MOVE),
|
||||
_R(MSG_TITLE_FSENSOR_TOO_EARLY),
|
||||
_R(MSG_TITLE_SELECTOR_CANNOT_HOME),
|
||||
_R(MSG_TITLE_SELECTOR_CANNOT_MOVE),
|
||||
_R(MSG_TITLE_IDLER_CANNOT_HOME),
|
||||
_R(MSG_TITLE_IDLER_CANNOT_MOVE),
|
||||
_R(MSG_TITLE_TMC_WARNING_TMC_TOO_HOT),
|
||||
_R(MSG_TITLE_TMC_WARNING_TMC_TOO_HOT),
|
||||
_R(MSG_TITLE_TMC_WARNING_TMC_TOO_HOT),
|
||||
_R(MSG_TITLE_TMC_OVERHEAT_ERROR),
|
||||
_R(MSG_TITLE_TMC_OVERHEAT_ERROR),
|
||||
_R(MSG_TITLE_TMC_OVERHEAT_ERROR),
|
||||
_R(MSG_TITLE_TMC_DRIVER_ERROR),
|
||||
_R(MSG_TITLE_TMC_DRIVER_ERROR),
|
||||
_R(MSG_TITLE_TMC_DRIVER_ERROR),
|
||||
_R(MSG_TITLE_TMC_DRIVER_RESET),
|
||||
_R(MSG_TITLE_TMC_DRIVER_RESET),
|
||||
_R(MSG_TITLE_TMC_DRIVER_RESET),
|
||||
_R(MSG_TITLE_TMC_UNDERVOLTAGE_ERROR),
|
||||
_R(MSG_TITLE_TMC_UNDERVOLTAGE_ERROR),
|
||||
_R(MSG_TITLE_TMC_UNDERVOLTAGE_ERROR),
|
||||
_R(MSG_TITLE_TMC_DRIVER_SHORTED),
|
||||
_R(MSG_TITLE_TMC_DRIVER_SHORTED),
|
||||
_R(MSG_TITLE_TMC_DRIVER_SHORTED),
|
||||
_R(MSG_TITLE_MMU_NOT_RESPONDING),
|
||||
_R(MSG_TITLE_COMMUNICATION_ERROR),
|
||||
_R(MSG_TITLE_FILAMENT_ALREADY_LOADED),
|
||||
_R(MSG_TITLE_INVALID_TOOL),
|
||||
_R(MSG_TITLE_QUEUE_FULL),
|
||||
_R(MSG_TITLE_FW_UPDATE_NEEDED),
|
||||
_R(MSG_TITLE_FW_RUNTIME_ERROR),
|
||||
_R(MSG_TITLE_UNLOAD_MANUALLY)
|
||||
};
|
||||
|
||||
// @@TODO looking at the texts, they can be composed of several parts and/or parametrized (could save a lot of space ;) )
|
||||
// Moreover, some of them have been disabled in favour of saving some more code size.
|
||||
static const char descFINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA didn't trigger while loading the filament. Ensure the filament can move and FINDA works.");
|
||||
static const char descFINDA_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FINDA didn't switch off while unloading filament. Try unloading manually. Ensure filament can move and FINDA works.");
|
||||
static const char descFSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("Filament sensor didn't trigger while loading the filament. Ensure the filament reached the fsensor and the sensor works.");
|
||||
static const char descFSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("Filament sensor didn't switch off while unloading filament. Ensure filament can move and the sensor works.");
|
||||
static const char descPULLEY_STALLED[] PROGMEM_I1 = ISTR("Pulley motor stalled. Ensure the pulley can move and check the wiring.");
|
||||
static const char descFSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("Filament sensor triggered too early while loading to extruder. Check there isn't anything stuck in PTFE tube. Check that sensor reads properly.");
|
||||
static const char descSELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Selector cannot home properly. Check for anything blocking its movement.");
|
||||
static const char descCANNOT_MOVE[] PROGMEM_I1 = ISTR(""); // these errors have been disabled
|
||||
//static const char descSELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Selector cannot move. Check for anything blocking its movement. Check the wiring is correct.");
|
||||
static const char descIDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Idler cannot home properly. Check for anything blocking its movement.");
|
||||
//static const char descIDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Idler cannot move properly. Check for anything blocking its movement. Check the wiring is correct.");
|
||||
static const char descTMC[] PROGMEM_I1 = ISTR("More details online.");
|
||||
//static const char descPULLEY_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char descSELECTOR_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char descIDLER_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char descPULLEY_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char descSELECTOR_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char descIDLER_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char descPULLEY_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char descSELECTOR_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char descIDLER_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char descPULLEY_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descSELECTOR_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descIDLER_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descPULLEY_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Pulley TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descSELECTOR_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Selector TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descIDLER_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Idler TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char descPULLEY_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Pulley TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
//static const char descSELECTOR_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Selector TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
//static const char descIDLER_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Idler TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
static const char descMMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU unit not responding. Check the wiring and connectors. If the issue persists, contact support.");
|
||||
static const char descCOMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("MMU unit not responding correctly. Check the wiring and connectors. If the issue persists, contact support.");
|
||||
static const char descFILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("Cannot perform the action, filament is already loaded. Unload it first.");
|
||||
static const char descINVALID_TOOL[] PROGMEM_I1 = ISTR("Requested filament tool is not available on this hardware. Check the G-code for tool index out of range (T0-T4).");
|
||||
static const char descQUEUE_FULL[] PROGMEM_I1 = ISTR("MMU Firmware internal error, please reset the MMU.");
|
||||
static const char descFW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("The MMU unit reports its FW version incompatible with the printer's firmware. Make sure the MMU firmware is up to date.");
|
||||
static const char descFW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("Internal runtime error. Try resetting the MMU unit or updating the firmware. If the issue persists, contact support.");
|
||||
static const char descUNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("Unexpected FINDA reading. Ensure no filament is under FINDA and the selector is free. Check FINDA connection.");
|
||||
static const char MSG_DESC_FINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA didn't trigger while loading the filament. Ensure the filament can move and FINDA works."); ////MSG_DESC_FINDA_DIDNT_TRIGGER c=20
|
||||
static const char MSG_DESC_FINDA_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FINDA didn't switch off while unloading filament. Try unloading manually. Ensure filament can move and FINDA works."); ////MSG_DESC_FINDA_DIDNT_GO_OFF c=20
|
||||
static const char MSG_DESC_FSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("Filament sensor didn't trigger while loading the filament. Ensure the filament reached the fsensor and the sensor works."); ////MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20
|
||||
static const char MSG_DESC_FSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("Filament sensor didn't switch off while unloading filament. Ensure filament can move and the sensor works."); ////MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20
|
||||
static const char MSG_DESC_PULLEY_STALLED[] PROGMEM_I1 = ISTR("Pulley motor stalled. Ensure the pulley can move and check the wiring."); ////MSG_DESC_PULLEY_STALLED c=20
|
||||
static const char MSG_DESC_FSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("Filament sensor triggered too early while loading to extruder. Check there isn't anything stuck in PTFE tube. Check that sensor reads properly."); ////MSG_DESC_FSENSOR_TOO_EARLY c=20
|
||||
static const char MSG_DESC_SELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Selector cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_SELECTOR_CANNOT_HOME c=20
|
||||
static const char MSG_DESC_CANNOT_MOVE[] PROGMEM_I1 = ISTR(""); // these errors have been disabled
|
||||
//static const char MSG_DESC_SELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Selector cannot move. Check for anything blocking its movement. Check the wiring is correct.");
|
||||
static const char MSG_DESC_IDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Idler cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_IDLER_CANNOT_HOME c=20
|
||||
//static const char MSG_DESC_IDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Idler cannot move properly. Check for anything blocking its movement. Check the wiring is correct.");
|
||||
static const char MSG_DESC_TMC[] PROGMEM_I1 = ISTR("More details online."); ////MSG_DESC_TMC c=20
|
||||
//static const char MSG_DESC_PULLEY_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char MSG_DESC_SELECTOR_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char MSG_DESC_IDLER_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
|
||||
//static const char MSG_DESC_PULLEY_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char MSG_DESC_SELECTOR_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char MSG_DESC_IDLER_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is overheated. Cool down the MMU board and reset MMU.");
|
||||
//static const char MSG_DESC_PULLEY_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char MSG_DESC_SELECTOR_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char MSG_DESC_IDLER_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is not responding. Try resetting the MMU. If the issue persists contact support.");
|
||||
//static const char MSG_DESC_PULLEY_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_SELECTOR_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_IDLER_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_PULLEY_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Pulley TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_SELECTOR_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Selector TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_IDLER_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Idler TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
|
||||
//static const char MSG_DESC_PULLEY_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Pulley TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
//static const char MSG_DESC_SELECTOR_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Selector TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
//static const char MSG_DESC_IDLER_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Idler TMC driver. Check the wiring and connectors. If the issue persists contact support.");
|
||||
static const char MSG_DESC_MMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU unit not responding. Check the wiring and connectors. If the issue persists, contact support."); ////MSG_DESC_MMU_NOT_RESPONDING c=20
|
||||
static const char MSG_DESC_COMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("MMU unit not responding correctly. Check the wiring and connectors. If the issue persists, contact support."); ////MSG_DESC_COMMUNICATION_ERROR c=20
|
||||
static const char MSG_DESC_FILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("Cannot perform the action, filament is already loaded. Unload it first."); ////MSG_DESC_FILAMENT_ALREADY_LOADED c=20
|
||||
static const char MSG_DESC_INVALID_TOOL[] PROGMEM_I1 = ISTR("Requested filament tool is not available on this hardware. Check the G-code for tool index out of range (T0-T4)."); ////MSG_DESC_INVALID_TOOL c=20
|
||||
static const char MSG_DESC_QUEUE_FULL[] PROGMEM_I1 = ISTR("MMU Firmware internal error, please reset the MMU."); ////MSG_DESC_QUEUE_FULL c=20
|
||||
static const char MSG_DESC_FW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("The MMU unit reports its FW version incompatible with the printer's firmware. Make sure the MMU firmware is up to date."); ////MSG_DESC_FW_UPDATE_NEEDED c=20
|
||||
static const char MSG_DESC_FW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("Internal runtime error. Try resetting the MMU unit or updating the firmware. If the issue persists, contact support."); ////MSG_DESC_FW_RUNTIME_ERROR c=20
|
||||
static const char MSG_DESC_UNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("Unexpected FINDA reading. Ensure no filament is under FINDA and the selector is free. Check FINDA connection."); ////MSG_DESC_UNLOAD_MANUALLY c=20
|
||||
|
||||
static const char * const errorDescs[] PROGMEM = {
|
||||
descFINDA_DIDNT_TRIGGER,
|
||||
descFINDA_DIDNT_GO_OFF,
|
||||
descFSENSOR_DIDNT_TRIGGER,
|
||||
descFSENSOR_DIDNT_GO_OFF,
|
||||
descPULLEY_STALLED,
|
||||
descFSENSOR_TOO_EARLY,
|
||||
descSELECTOR_CANNOT_HOME,
|
||||
descCANNOT_MOVE,
|
||||
descIDLER_CANNOT_HOME,
|
||||
descCANNOT_MOVE,
|
||||
descTMC, // descPULLEY_WARNING_TMC_TOO_HOT,
|
||||
descTMC, // descSELECTOR_WARNING_TMC_TOO_HOT,
|
||||
descTMC, // descIDLER_WARNING_TMC_TOO_HOT,
|
||||
descTMC, // descPULLEY_TMC_OVERHEAT_ERROR,
|
||||
descTMC, // descSELECTOR_TMC_OVERHEAT_ERROR,
|
||||
descTMC, // descIDLER_TMC_OVERHEAT_ERROR,
|
||||
descTMC, // descPULLEY_TMC_DRIVER_ERROR,
|
||||
descTMC, // descSELECTOR_TMC_DRIVER_ERROR,
|
||||
descTMC, // descIDLER_TMC_DRIVER_ERROR,
|
||||
descTMC, // descPULLEY_TMC_DRIVER_RESET,
|
||||
descTMC, // descSELECTOR_TMC_DRIVER_RESET,
|
||||
descTMC, // descIDLER_TMC_DRIVER_RESET,
|
||||
descTMC, // descPULLEY_TMC_UNDERVOLTAGE_ERROR,
|
||||
descTMC, // descSELECTOR_TMC_UNDERVOLTAGE_ERROR,
|
||||
descTMC, // descIDLER_TMC_UNDERVOLTAGE_ERROR,
|
||||
descTMC, // descPULLEY_TMC_DRIVER_SHORTED,
|
||||
descTMC, // descSELECTOR_TMC_DRIVER_SHORTED,
|
||||
descTMC, // descIDLER_TMC_DRIVER_SHORTED,
|
||||
descMMU_NOT_RESPONDING,
|
||||
descCOMMUNICATION_ERROR,
|
||||
descFILAMENT_ALREADY_LOADED,
|
||||
descINVALID_TOOL,
|
||||
descQUEUE_FULL,
|
||||
descFW_UPDATE_NEEDED,
|
||||
descFW_RUNTIME_ERROR,
|
||||
descUNLOAD_MANUALLY
|
||||
MSG_DESC_FINDA_DIDNT_TRIGGER,
|
||||
MSG_DESC_FINDA_DIDNT_GO_OFF,
|
||||
MSG_DESC_FSENSOR_DIDNT_TRIGGER,
|
||||
MSG_DESC_FSENSOR_DIDNT_GO_OFF,
|
||||
MSG_DESC_PULLEY_STALLED,
|
||||
MSG_DESC_FSENSOR_TOO_EARLY,
|
||||
MSG_DESC_SELECTOR_CANNOT_HOME,
|
||||
MSG_DESC_CANNOT_MOVE,
|
||||
MSG_DESC_IDLER_CANNOT_HOME,
|
||||
MSG_DESC_CANNOT_MOVE,
|
||||
MSG_DESC_TMC, // descPULLEY_WARNING_TMC_TOO_HOT,
|
||||
MSG_DESC_TMC, // descSELECTOR_WARNING_TMC_TOO_HOT,
|
||||
MSG_DESC_TMC, // descIDLER_WARNING_TMC_TOO_HOT,
|
||||
MSG_DESC_TMC, // descPULLEY_TMC_OVERHEAT_ERROR,
|
||||
MSG_DESC_TMC, // descSELECTOR_TMC_OVERHEAT_ERROR,
|
||||
MSG_DESC_TMC, // descIDLER_TMC_OVERHEAT_ERROR,
|
||||
MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_ERROR,
|
||||
MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_ERROR,
|
||||
MSG_DESC_TMC, // descIDLER_TMC_DRIVER_ERROR,
|
||||
MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_RESET,
|
||||
MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_RESET,
|
||||
MSG_DESC_TMC, // descIDLER_TMC_DRIVER_RESET,
|
||||
MSG_DESC_TMC, // descPULLEY_TMC_UNDERVOLTAGE_ERROR,
|
||||
MSG_DESC_TMC, // descSELECTOR_TMC_UNDERVOLTAGE_ERROR,
|
||||
MSG_DESC_TMC, // descIDLER_TMC_UNDERVOLTAGE_ERROR,
|
||||
MSG_DESC_TMC, // descPULLEY_TMC_DRIVER_SHORTED,
|
||||
MSG_DESC_TMC, // descSELECTOR_TMC_DRIVER_SHORTED,
|
||||
MSG_DESC_TMC, // descIDLER_TMC_DRIVER_SHORTED,
|
||||
MSG_DESC_MMU_NOT_RESPONDING,
|
||||
MSG_DESC_COMMUNICATION_ERROR,
|
||||
MSG_DESC_FILAMENT_ALREADY_LOADED,
|
||||
MSG_DESC_INVALID_TOOL,
|
||||
MSG_DESC_QUEUE_FULL,
|
||||
MSG_DESC_FW_UPDATE_NEEDED,
|
||||
MSG_DESC_FW_RUNTIME_ERROR,
|
||||
MSG_DESC_UNLOAD_MANUALLY
|
||||
};
|
||||
|
||||
// we have max 3 buttons/operations to select from
|
||||
// one of them is "More" to show the explanation text normally hidden in the next screens.
|
||||
// 01234567890123456789
|
||||
// >bttxt >bttxt >MoreW
|
||||
// >bttxt >bttxt>MoreW
|
||||
// Therefore at least some of the buttons, which can occur on the screen together, need to be 5-chars long max @@TODO.
|
||||
// Beware - we only have space for 2 buttons on the LCD while the MMU has 3 buttons
|
||||
// -> the left button on the MMU is not used/rendered on the LCD (it is also almost unused on the MMU side)
|
||||
static const char btnRetry[] PROGMEM_I1 = ISTR("Retry");
|
||||
static const char btnContinue[] PROGMEM_I1 = ISTR("Done");
|
||||
static const char btnRestartMMU[] PROGMEM_I1 = ISTR("RstMMU");
|
||||
static const char btnUnload[] PROGMEM_I1 = ISTR("Unload");
|
||||
static const char btnStop[] PROGMEM_I1 = ISTR("Stop");
|
||||
static const char btnDisableMMU[] PROGMEM_I1 = ISTR("Disable");
|
||||
static const char btnMore[] PROGMEM_I1 = ISTR("More\x06");
|
||||
static const char MSG_BTN_RETRY[] PROGMEM_I1 = ISTR("Retry"); ////MSG_BTN_RETRY c=5
|
||||
static const char MSG_BTN_CONTINUE[] PROGMEM_I1 = ISTR("Done"); ////MSG_BTN_CONTINUE c=5
|
||||
static const char MSG_BTN_RESTART_MMU[] PROGMEM_I1 = ISTR("RstMMU"); ////MSG_BTN_RESTART_MMU c=9
|
||||
static const char MSG_BTN_UNLOAD[] PROGMEM_I1 = ISTR("Unload"); ////MSG_BTN_UNLOAD c=6
|
||||
static const char MSG_BTN_STOP[] PROGMEM_I1 = ISTR("Stop"); ////MSG_BTN_STOP c=5
|
||||
static const char MSG_BTN_DISABLE_MMU[] PROGMEM_I1 = ISTR("Disable"); ////MSG_BTN_DISABLE_MMU c=9
|
||||
static const char MSG_BTN_MORE[] PROGMEM_I1 = ISTR("More\x06"); ////MSG_BTN_MORE c=5
|
||||
|
||||
// Used to parse the buttons from Btns().
|
||||
static const char * const btnOperation[] PROGMEM = {
|
||||
btnRetry,
|
||||
btnContinue,
|
||||
btnRestartMMU,
|
||||
btnUnload,
|
||||
btnStop,
|
||||
btnDisableMMU
|
||||
_R(MSG_BTN_RETRY),
|
||||
_R(MSG_BTN_CONTINUE),
|
||||
_R(MSG_BTN_RESTART_MMU),
|
||||
_R(MSG_BTN_UNLOAD),
|
||||
_R(MSG_BTN_STOP),
|
||||
_R(MSG_BTN_DISABLE_MMU),
|
||||
};
|
||||
|
||||
// We have 8 different operations/buttons at this time, so we need at least 4 bits to encode each.
|
||||
|
|
|
|||
|
|
@ -150,7 +150,7 @@ const char * const PrusaErrorButtonTitle(uint8_t bi){
|
|||
}
|
||||
|
||||
const char * const PrusaErrorButtonMore(){
|
||||
return btnMore;
|
||||
return _R(MSG_BTN_MORE);
|
||||
}
|
||||
|
||||
struct ResetOnExit {
|
||||
|
|
|
|||
Loading…
Reference in New Issue