738dc511ee
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 16:45:39 +00:00
853c2ad6e9
Fix excessive flash usage.
2022-11-12 07:49:36 -05:00
68ef03f46a
Fix PFW-1364 & possible comms timeout during reheat
2022-11-11 12:59:21 -05:00
fd832f9ccf
Merge pull request #3737 from gudnimg/fix-longpress-inactivity-timeout
...
Fix long-press LCD inactivity timeout
2022-11-08 14:10:57 +01:00
76a164e651
fixup
2022-11-08 13:49:40 +01:00
08460bd403
PFW-1397 Drop ON_MENU_ENTER
...
Using _menu_data_t turns out to save *just* a little bit more flash. So for now just use it.
2022-11-08 13:49:40 +01:00
390f69a82f
PFW-1397 Fix: ON_MENU_ENTER was always run
2022-11-08 13:49:40 +01:00
59a452ac27
PFW-1397 minor comment tweaks
2022-11-08 13:49:40 +01:00
f160f5594d
PFW-1397 cleanup statistics menu
...
Change in memory:
Flash: -18 bytes
SRAM: -1 byte
2022-11-08 13:49:40 +01:00
82bd9db1d6
PFW-1397 Implement ON_MENU_ENTER to simplify code
...
ON_MENU_ENTER runs code within the brackets only once
after a new menu is entered.
For the tool change menu, this allows us to display the data and
read from EEPROM only once.
2022-11-08 13:49:40 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
fcfb868167
PFW-1397 Add a temporary menu item to show the statistic
...
The location of the menu has not been decided. Currently I placed it where convenient.
2022-11-08 13:49:40 +01:00
5a60a85467
PFW-1397 Increment toolchange statistic
2022-11-08 13:49:40 +01:00
0af7d28074
PFW-1397 Allocate EEPROM memory for toolchange counter
2022-11-08 13:49:40 +01:00
7fe22e8f79
Fix long-press LCD inactivity timeout
...
Fixes #3715
When a long-press is triggered, the LCD inactivity timer
needs to be restarted. This is done with lcd_timeoutToStatus.start()
This also fixes situations where a long-press is triggered, and the timer
times out immediately (because it was not reset properly)
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-06 13:43:14 +00:00
853adbf411
Bump up build number
...
+1 for commit
+1 for merge
2022-11-04 11:16:07 +01:00
7c009cadb8
Bump up Revision to ALPHA1 6051
...
Temporary fix for MSG_BTN_MORE
pre-release pot and po update
2022-11-04 10:21:39 +01:00
7b20f8c6f3
Merge pull request #3717 from 3d-gussner/MK3_Temp_Model_menu
...
Add Menu `Calibration -> Temp. model cal`
2022-11-03 12:12:55 +01:00
1e0909d50c
Disable `Error:` messages for MMU2 errors
2022-11-03 12:09:03 +01:00
8543942acb
Fix Z-leveling
2022-11-03 06:22:57 +01:00
fd6da0e766
Fix typo
...
Add lcd_setatatus_serial to output lcd status message and serial at the same time
2022-11-02 10:09:32 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
2ac2cd2255
Fix MK25/S builds
2022-10-26 14:27:22 +02:00
072b3f8300
Temp Model cal. menu
2022-10-26 13:34:27 +02:00
f4a2c1c794
Update translations
...
Fix button msg
Update Dutch `F. jam detect`
2022-10-25 10:29:35 +02:00
45c72d48ed
optimisation: use failstats_reset_print in factory_reset_stats
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2022-10-23 09:58:56 +00:00
edc5d013dd
Merge pull request #3698 from leptun/farm_presort_cache
...
Farm mode: cache filenames in the presort function
2022-10-21 15:43:49 +02:00
b792d47350
Merge pull request #3694 from 3d-gussner/MK3_Hotend_fan
...
PFW-1415: Rename `Extruder fan` to `Hotend fan`
2022-10-19 08:47:15 +02:00
b485992c9e
If in farm mode, force the sorting direction to be reversed
...
So in an ideal scenario, the newest file is first. This of course breaks as soon as a file is deleted/renamed/moved, but it should at least be fixed now compared to before where the direction could be influenced by a disabled setting
2022-10-18 17:29:31 +02:00
798f215f88
Refactor SD menu settings
2022-10-18 17:24:35 +02:00
eaaf1d6872
Rename Sheets
...
- `Satin 1` to `Satin `
- `Satin 2` to `NylonPA`
2022-10-18 10:20:01 +02:00
e18bfce597
Farm mode: cache filenames in the presort function
2022-10-17 20:17:28 +02:00
e83728f72c
Change fan RPM display to 5 digits
...
All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656
2022-10-17 15:41:05 +02:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
2682b64a09
Optimisation: Reduce code size in rendering SD file names and folders
...
Change in memory:
Flash: -88 bytes
SRAM: 0 bytes
2022-10-12 20:19:21 +00:00
2c695f14be
Increase required MMU version to 2.1.4.x
2022-10-12 07:45:13 +02:00
6eab0dda59
Add parentheses - be more explicit in error codes' masking and comparison
2022-10-11 15:51:01 +02:00
0aeb74e5b1
Intercept M708 A0xb: set ExtraLoadDistance on the printer side too
2022-10-11 15:51:01 +02:00
b0466ae20f
Add infrastructure for MMU parametrization after comm start
...
For now, only the Extra loading distance is being sent, but the infrastructure can be easily extended for other registers as well.
2022-10-11 15:51:01 +02:00
c7e4c9ce99
Allow backwards compatibility with legacy MMU g-codes
...
This piece just changes the default extra load length on the MK3 side.
The same needs to be done on the MMU side but:
- the MMU exposes its register for this (so we can change the extra load distance by writing into the register via G-code)
- the printer shall probably set this value on its own after line up of MMU communication
2022-10-11 15:51:01 +02:00
013ce588a5
Support reading/polling multiple registers
...
In Idle and Command mode it is now possible to specify a list of registers which shall be periodically read from the MMU.
To keep the code and RAM size down registers are intentionally separated into 8bit and 16bit sets.
Adding a register into the set is just a matter of parametrization, there is no need to change the state machines anymore.
2022-10-11 15:51:01 +02:00
ebb79351a7
Add preliminary support for MMU_SELFTEST_FAILED error messages
2022-10-11 15:51:01 +02:00
d5ca47d1a6
Merge pull request #3646 from gudnimg/fix-mmu-buttons-v2
...
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-11 13:42:39 +02:00
8882d8f2c8
Only move XY when position is known
...
I had a crash when producing an error screen and printer was unhomed.
Extruder was located at the far right side, and immediately crashed when attempting to park.
2022-10-11 07:16:52 +02:00
9f3361577e
Merge pull request #3643 from gudnimg/PFW-1358
...
PFW-1358 More button utilizes text and an empty character on the right
2022-10-10 18:02:22 +00:00
98cfc37017
Merge pull request #3674 from gudnimg/mmu-first-lay-cal-purge-line
...
MMU: Sync first layer purge line with PrusaSlicer generated output
2022-10-10 17:59:18 +00:00
213f0e8c71
PFW-1358 Update second_col description
...
Value is no longer hardcoded
2022-10-10 17:48:56 +00:00
eb43d712df
Enable MISO pullup during SD CMD0
...
Fix typo
2022-10-10 09:43:50 +02:00
ccf0c0a09f
Merge pull request #3675 from gudnimg/pad-mmu-status-messages
...
Fix issue where MMU status messages are not padded
2022-10-09 10:49:55 +00:00
Guðni Már Gilbert
VintagePC
3d-gussner
DRracer
Alex Voinea
D.R.racer