josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,019 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

2019 Commits

Author SHA1 Message Date
Marek Bel 08fcfa775d Merge branch 'MK3_dev' into simplify_EEPROM_M500 2018-10-08 20:41:30 +02:00
Marek Bel 9cae0c378a Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules." 2018-10-08 20:24:56 +02:00
Marek Bel 1585dc66b0 Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 
Known limitation: Unable to compile.
 2018-10-08 15:58:49 +02:00
PavelSindler d79025de58
Merge pull request #1230 from mkbel/improve_erase_EEPROM 
PFW-608 Decrease wear of mass erase EEPROM and do it faster.
 2018-10-08 10:14:22 +02:00
Marek Bel c77672bf0f PFW-608 Decrease wear of mass erase EEPROM and do it faster. 2018-10-05 18:11:26 +02:00
PavelSindler d2aa13d333
Merge pull request #1199 from mkbel/document_gcodes1 
Documentation: Put scattered and unscattered Gcode documentation toge…
 2018-10-04 16:29:39 +02:00
PavelSindler 3a58489c6a
Merge pull request #1169 from mkbel/remove_duplicate_debouncing_4 
Remove duplicate debouncing 4
 2018-10-02 11:21:17 +02:00
Marek Bel 0e33db0064 Documentation: Put scattered and unscattered Gcode documentation together in process_commands documentation. Mention at least existence of all implemented commands. Document T<n> and T? commands. 2018-09-26 18:55:31 +02:00
Marek Bel 4151e19781 Remove attribute packed. It is not needed on 8-bit platform. Change of platform would be detected by static_assert (sizeof(M500_conf) == 188). 2018-09-25 16:27:20 +02:00
Marek Bel ccfcc6f989 Document. 2018-09-24 18:32:01 +02:00
Marek Bel 3662f60f8f if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values; 2018-09-24 18:13:20 +02:00
Marek Bel c38fef281d Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore. 2018-09-24 17:33:58 +02:00
Marek Bel ca179a2d18 Use cs.filament_size from ConfigurationStore. 2018-09-24 17:29:02 +02:00
Marek Bel e225e9cab0 Use cs.volumetric_enabled from ConfigurationStore. 2018-09-24 17:12:16 +02:00
Marek Bel a201128b20 Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore. 2018-09-24 17:10:25 +02:00
Marek Bel 7e593e6922 Use cs.autoretract_enabled from ConfigurationStore. 2018-09-24 17:03:10 +02:00
Marek Bel 20ba2b1c79 Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore. 2018-09-24 16:57:48 +02:00
Marek Bel 54bcc8aa52 Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore. 2018-09-24 16:54:50 +02:00
Marek Bel f2ae3fb1f7 Use cs.zprobe_zoffset from ConfigurationStore. 2018-09-24 16:47:57 +02:00
Marek Bel 959d0069fa Use cs.add_homing from ConfigurationStore. 2018-09-24 16:42:28 +02:00
Marek Bel ac7c062161 Use cs.max_jerk from ConfigurationStore. 2018-09-24 16:35:33 +02:00
Marek Bel bb66bfe6a7 Use cs.minsegmenttime from ConfigurationStore. 2018-09-24 16:22:50 +02:00
Marek Bel 10428b30d9 Use cs.mintravelfeedrate from ConfigurationStore. 2018-09-24 16:01:58 +02:00
Marek Bel 26e2fd1c76 Use cs.minimumfeedrate from ConfigurationStore. 2018-09-24 15:57:24 +02:00
Marek Bel b8fefceb4d Use cs.retract_acceleration from ConfigurationStore. 2018-09-24 15:53:35 +02:00
Marek Bel 7dbe0afdc4 Use cs.acceleration from ConfigurationStore. 2018-09-24 15:47:36 +02:00
Marek Bel cee51cf9c3 Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore. 2018-09-24 15:40:35 +02:00
Marek Bel 02becb5e6a Use cs.max_feedrate_normal from ConfigurationStore. 2018-09-24 15:09:19 +02:00
Marek Bel 3f28632443 Use cs.axis_steps_per_unit from ConfigurationStore. 2018-09-24 14:54:41 +02:00
Marek Bel d611cad087 Temporary hide M500_conf cs to allow automated renaming. 2018-09-24 14:42:01 +02:00
Marek Bel e94dc1341a Use M500_conf cs in Config_ StoreSettings, RetrieveSettings and ResetDefault. 2018-09-24 14:34:43 +02:00
Marek Bel 991db0e71d Finish default_conf. 2018-09-23 23:36:01 +02:00
Marek Bel d9e2dcc736 Incomplete. 2018-09-23 22:21:28 +02:00
Marek Bel 58af1ae4c4 Add configuration store struct. 2018-09-21 20:52:44 +02:00
PavelSindler 29e578b5f8
Merge pull request #1147 from mkbel/add_wizard_unload 
Add possibility to unload filament from wizard first layer calibration
 2018-09-19 10:27:19 +02:00
Marek Bel 05d3b7032d Update documentation. 2018-09-18 17:48:11 +02:00
Marek Bel a7fdfdd258 Put repetitive code into separate function. No change in functionality. 2018-09-18 17:15:13 +02:00
Marek Bel 6ee97468ee Remove lcd_buttons_update() call from all other places than interrupt. There is no known reason, why lcd_buttons_update() should be called from multiple places and multiple contexts. Remove mutex, which is not needed anymore, and wasn't implemented properly anyway (Operation was not atomic.). 2018-09-18 16:05:49 +02:00
Marek Bel f532da4b17 Remove duplicate button debouncing code. Save 254B flash. 2018-09-18 14:39:01 +02:00
Marek Bel 90a10a692a Enable button debouncing also in modal mode (!lcd_update_enabled). In lcd_clicked() consume click event immediately. 2018-09-18 14:38:50 +02:00
Marek Bel ab2d350ed1 Don't enable lcd update in lcd_show_fullscreen_message_and_wait_P(). Don't show menu in wizard when ejecting filament. 2018-09-17 21:23:13 +02:00
Marek Bel a687b8e64a Don't enable lcd update inside mmu_eject_filament(). 2018-09-17 17:12:36 +02:00
Marek Bel f496076508 Remove redundant code. No change in functionality. 2018-09-14 18:33:03 +02:00
Marek Bel 635a1b4cd8 Add possibility to to select preheat temperature when unloading filament in first layer calibration wizard. 
Known limitations:
During filament eject, menu is shown for some moment.
 2018-09-14 18:29:14 +02:00
Marek Bel fe30e58fb5 Add possibility to unload filament from wizard before first layer calibration, if it is not PLA. 
Known limitations:
Preheat temperature other than PLA can not be selected.
During filament eject, menu is shown for some moment.
 2018-09-14 16:06:25 +02:00
Marek Bel d14822b22f Give wizard states human readable names. Use uint8_t as underlying type - saves 20B of FLASH memory. 2018-09-13 16:37:41 +02:00
PavelSindler acff75ac00
Merge pull request #1138 from mkbel/add_cancel 
Add cancel
 2018-09-13 14:30:26 +02:00
Marek Bel 44975c6963 Merge branch 'MK3_dev' into add_cancel 2018-09-13 14:27:12 +02:00
PavelSindler 5e63057e43
Merge pull request #1135 from mkbel/fix_mmu_1st_lay_cal 
Fix mmu 1st lay cal
 2018-09-13 13:58:00 +02:00
PavelSindler 75e8c1fc43
Merge branch 'MK3_dev' into fix_mmu_1st_lay_cal 2018-09-13 13:57:41 +02:00