1010f23959
Fix an issue where findaPressed is never set
...
This caused instant FINDA runout when the print starts. Now fixed :)
2022-09-16 10:23:47 +02:00
4d3a5433ad
Implement read/write registers for M707/M708
2022-09-16 10:23:47 +02:00
18423685b6
Cleanup ExpectsResponse usage
2022-09-16 10:22:39 +02:00
d5377c1781
Remove extra "scopeState = ScopeState::FINDAReqSent"
...
saves ~20B in total
2022-09-16 10:22:39 +02:00
e205d0ee2f
Autoretry Idle scope: transf. into Finished, should stay in Processing
2022-09-16 10:22:39 +02:00
78cbea08e6
Fix pgm_read* usage
2022-09-16 10:22:39 +02:00
6c0d3b0b78
Optimize MMU protocol logic
2022-09-16 10:22:39 +02:00
05ad1dc2f6
Refactoring of protocol logic to lower RAM consumption
...
Should also place the statistics request to the right spot in the state machine.
2022-09-16 10:22:39 +02:00
dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
0e036b9d8a
Save some more RAM in protocol_logic
2022-09-16 10:22:38 +02:00
2f0ceabce5
Upgrade protocol to v2.1 - read/write registers + CRC
2022-09-16 10:22:38 +02:00
938fac4058
Remove old comment, button is acknowledged now
2022-09-16 10:22:38 +02:00
f717aa161c
Remove TODO in ActivatePlannedRequest
2022-09-16 10:22:38 +02:00
b9d9308f9f
Support 3x Retry in Idle state machine
2022-09-16 10:22:38 +02:00
ab32769487
Send button from current state machine
2022-09-16 10:22:38 +02:00
4f30cf0ba3
Add missing ProtocolError
2022-09-16 10:22:38 +02:00
53e2d68183
Retry up to 6x in case of incorrect MMU FW version
...
Because it looks like the communication drop outs are caused by some electrical issues and we can loose even a byte from the version response, which is deadly for future operation.
2022-09-16 10:22:38 +02:00
14b2befb7d
Switch from Start Seq into Idle immediately + disable FS autoload on MMU
2022-09-16 10:22:38 +02:00
1d2acb5bd6
Bump MMU FW version to 2.0.19 to match/enforce the necessary compatibility level
2022-09-16 10:22:38 +02:00
fa176c69db
Fix protocol error recovery
...
Communication timeout and Protocol Errors are now distinguished.
In case of a Protocol Error, the printer waits for heartBeatTimeout to allow filling up the input UART buffer (we expect the MMU still produces some bytes).
Once the timeout elapsed, the input UART buffer is cleared and a new Start Sequence is initiated.
2022-09-16 10:22:38 +02:00
69c39e2281
An attempt at fixing the retry. Discussion needed.
2022-09-16 10:22:38 +02:00
a004273e8f
Avoid drawing MMU Error screen while MMU moves manually
2022-09-16 10:22:38 +02:00
98adcbaff2
Bump required MMU FW version to 2.0.18
2022-09-16 10:22:38 +02:00
dab26fe50b
Report detected MMU version in the Support menu
...
It was just subtly broken, all the functionality had already been implemented.
2022-09-16 10:22:38 +02:00
c07a5f396d
Fix button enum
2022-09-16 10:22:38 +02:00
f9bedc3c94
Button handling WIP
2022-09-16 10:22:38 +02:00
236098dbca
Make init MMU error screens send buttons (Idle mode)
2022-09-16 10:22:38 +02:00
b880559ba7
Reset MMU upon start + fix reporting its start errors
2022-09-16 10:22:38 +02:00
b6b265e371
Hack around old MMU FW's msgs
2022-09-16 10:22:38 +02:00
a0e9a302b8
Suppress communication drop-out < 8s (MMU in bootloader)
...
PFW-1327
2022-09-16 10:22:38 +02:00
11290c1123
Add a read function for mmu_print_saved
...
and remove the old extern value which is not used anymore
I had to remove "MMU2::" from mmu2_protocol_logic.cpp, otherwise the build failed.
2022-09-16 10:22:37 +02:00
208e620660
Return ir_sensor_detected + related functionality
2022-09-16 10:21:53 +02:00
2e293e90a0
MMU2 interface overhaul
...
First port of the new MMU2-printer interface into 8bit FW.
2022-09-16 10:21:53 +02:00
Guðni Már Gilbert
D.R.racer
VintagePC