11f1a44d40
style
2018-11-21 17:21:27 +10:00
27e860e945
versioning for release
2018-11-21 17:18:35 +10:00
6b145760c1
hex
2018-11-21 10:21:22 +10:00
f34d6b23ce
Revert "unload_filament_withSensor rewrite"
...
This reverts commit f6a8eb56d7
2018-11-20 19:21:56 +10:00
f6a8eb56d7
unload_filament_withSensor rewrite
...
Pending Testing.
2018-11-20 11:35:22 +10:00
e297131789
Tested new features
...
Confirmed most new features working. Still battling with octoprint no pausing fully when in error state. Disabled for now. Working on another way to advise user print has halted. action:command to a telegram terminal command maybe.
2018-11-19 22:17:17 +10:00
20d33b2452
TuningFor FSensor Recovery
...
Rarely the FSensor becomes unresponsive, at this time it should now re-init sensor and continue. MMU Paused for User messages modified to enable forced filament sensed if in a fail state, not sensing current filament.
2018-11-18 20:46:18 +10:00
748df343c9
Changed FS ok to exactly after load
...
Previously FS would say ok to MK3, MK3 would wait 1.5s then do C0 assuming the completion of steps to bondtech after FSensor triggered. Wastes time and if value was increase for a custom setup it wouldn't be enough time.
No the ok from to MK3 is sent once the steps to bontech are complete, no delay on MK3 saving a few 100ms on stock and accommodating for custom lengths.
2018-11-17 09:15:19 +10:00
f1b32ea9e9
hex & version updated
2018-11-15 16:10:59 +10:00
2dc76c7468
Update Version
...
Preparing to merge this build as primary for MMU.
2018-11-15 15:55:29 +10:00
ad53565dcc
Adjusting C0 timing, testing working.
2018-11-15 14:11:13 +10:00
0ff1f3c71c
Upstream merging, testing in progress.
2018-11-14 16:42:30 +10:00
ec8844d744
Upstream Merging
2018-11-14 16:14:15 +10:00
2c6c976fe3
Merging Prusa 3.5.0-RC1 Upstream
2018-11-14 13:06:34 +10:00
a43afffbde
3-FSensorBuild:
2018-11-14 05:36:50 +10:00
6d12234031
Timing Testing and cleaning
2018-11-14 05:36:12 +10:00
0398c3c26b
Merge pull request #1335 from PavelSindler/T_codes
...
version change
2018-11-13 17:49:26 +01:00
51c80352e8
version change
2018-11-13 17:48:42 +01:00
51b4858a87
Merge pull request #1334 from XPila/V3_5
...
PFW658 - disable extruder motor while changing filament with mmu2 (pr…
2018-11-13 16:10:24 +01:00
c41b045ea7
Merge pull request #1333 from PavelSindler/T_codes
...
T-code fix
2018-11-13 16:09:52 +01:00
bfc343c7c5
PFW658 - disable extruder motor while changing filament with mmu2 (prevents extruder motor overheating)
2018-11-13 16:04:46 +01:00
15d0b083ed
whitespace
2018-11-13 15:58:21 +01:00
17a1049f23
T-codes fix
2018-11-13 15:56:19 +01:00
f297e72864
Merge pull request #1332 from XPila/V3_5
...
Fix PFW657 - filament runout detection is not working after autoload …
2018-11-13 14:10:11 +01:00
d886ba1100
Fix PFW657 - filament runout detection is not working after autoload disabled from menu.
2018-11-13 14:05:15 +01:00
3d97d81734
Merge pull request #1329 from PavelSindler/M600_load_fil_message
...
M600 filament load progress bar changes
2018-11-12 20:52:06 +01:00
27db32cbd0
Merge pull request #1331 from XPila/V3_5
...
M907 fix - value in mA (PFW655)
2018-11-12 20:49:09 +01:00
41b885c537
M907 fix - value in mA (PFW)
2018-11-12 20:39:25 +01:00
077697785a
Merge pull request #1330 from MRprusa3d/PFW-656
...
MMU module adjustment
2018-11-12 20:19:37 +01:00
5e8e96b5d7
MMU module adjustment
...
MMU module conditional compilation adjustment for MMU v1
2018-11-12 20:09:54 +01:00
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
f4c1e7924f
M600: show progress bar during first filament load
2018-11-12 18:35:06 +01:00
6b5747750a
Heater Safety When Failed to load/unload
2018-11-11 20:17:57 +10:00
20e854d336
premade hex included
2018-11-11 09:18:55 +10:00
fa37c28b11
version and bn update
2018-11-10 22:43:39 +10:00
3caaa01eb4
Merge pull request #14 from TheZeroBeast/MMU-MK3-FSensorBuild-Patch1
...
Mmu mk3 f sensor build patch1
2018-11-10 22:41:42 +10:00
37b70d50e2
c0 timing update
2018-11-10 22:20:28 +10:00
3a89cce04f
Further #8 fix, wasn't checking sensor when M600 active, tested working now.
2018-11-10 16:25:15 +10:00
0f02f9a4e3
Merge pull request #1324 from PavelSindler/MK3_for_merging
...
version change
2018-11-09 19:56:06 +01:00
10a81ea768
version change
2018-11-09 19:16:53 +01:00
3189fcb8de
Merge pull request #1323 from PavelSindler/MK3_for_merging
...
resume print fix: never disable steppers when preheating nozzle
2018-11-09 18:45:26 +01:00
5931d15566
whitespace
2018-11-09 18:31:28 +01:00
c991c8b314
resume print fix: wait for heater() never disable steppers
2018-11-09 18:29:35 +01:00
c8f5809e1e
remove .orig
2018-11-10 01:41:33 +10:00
91ca177a88
format.sh
2018-11-10 01:40:15 +10:00
10b79e918b
Merge pull request #1321 from PavelSindler/M600_load_fix
...
M600 load messages synchronization fixed
2018-11-09 15:40:00 +01:00
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
7022373885
Merge pull request #1320 from XPila/V3_5
...
localization - lang-export.sh + po files + tmc2130_print_currents fixed (M913)
2018-11-09 15:27:43 +01:00
3afebcc9cc
tmc2130_print_currents fixed (for obsolete M913)
2018-11-09 15:20:25 +01:00
31ce725828
lang-export.sh - script for generating po and pot files from dictionaries
...
+generated po and pot files.
2018-11-09 14:48:27 +01:00
Rob McKenzie
PavelSindler
PavelSindler
XPila
MRprusa3d
mkbel