2185f00cbd
Updates to last changes from Pavel
2017-05-18 12:16:39 +02:00
a217141f38
Updated my Bed PID settings
2017-05-05 17:02:03 +02:00
44a611a23e
added defines for snmm, removed unused defines
2017-05-05 01:55:36 +02:00
fa5672564c
Added PID tuning for heated bed
...
- Updated FW_version
- Added PID heated bed tuning
- Default PID bed temp set to 55°C
- Changed PID default cycles from 5 to 8 (most seen in PID tuning
guides)
2017-05-01 01:09:52 +02:00
8b674fc82b
Updated PINDA_PREHEAT_Y
2017-04-30 08:38:56 +02:00
15f1b59d79
Changed Filament change pos to X0 Y-2.2 and ...
...
ZADD to 20 to get more clearance while runout or changing filament in
low Z heights. With that ZADD value the highest change must be lower
than 180mm Z height, otherwise there is a chance to fail the print.
2017-04-26 11:52:09 +02:00
94b7fb4846
Update to 3.0.10-10 version...
...
Pavel made 25 April 2017
2017-04-26 09:13:23 +02:00
d5aa1bdceb
updated pinda preheat coordinate and pause retraction
2017-04-25 13:38:13 +02:00
dec62576e3
Activate 'filament run out support' and...
...
...change the filament change position from X211 to X0 which helps with
low Z height filament changes or run-outs...defined MY PID settings for
nozzle and bed.
2017-04-21 11:01:28 +02:00
4eaefd923a
configuration files updated
2017-04-19 16:41:59 +02:00
53938e2280
added defines for long pause print, button long press and pid tuning
2017-04-03 11:03:10 +02:00
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
2d05ae6be5
ping time prolonged to 60s
2017-03-13 14:49:29 +01:00
716b0bd1c7
ping time prolonged to 60s
2017-03-13 14:49:01 +01:00
a821f8d488
ping for farm mode added
2017-03-07 19:21:14 +01:00
7883d4eb4d
ping for farm mode added
2017-03-07 19:20:49 +01:00
b8fc05512d
added babystep min and max defines
2017-02-14 11:57:30 +01:00
57b9025415
added babystep min and max defines
2017-02-14 11:56:48 +01:00
bc3ab0b69a
PRINT_STARTED and PRINT_FINISHED added
2017-01-25 19:25:04 +01:00
e5c39f8d6d
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2017-01-25 19:22:52 +01:00
aa2564fe9f
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2017-01-16 18:34:17 +01:00
b56c1669db
defines for max bed and hotend temp added
2017-01-16 18:33:37 +01:00
bcc0e83d76
Fix up some accuracy issues with PT100 temp sensors in relation to the Rambo v1.3a
2017-01-12 15:49:48 -07:00
872ca47795
added defines for min and max steps per unit for E calibration
2017-01-12 16:43:46 +01:00
aad15877de
added defines for min and max steps per unit for E calibration
2017-01-12 16:42:25 +01:00
ea22febb42
added defines for snmm and stack guard
2017-01-09 16:27:44 +01:00
2db00510c2
Add modifications from the Mini Rambo 1.3a header to the Mini Rambo 1.0a header.
2016-12-31 07:20:15 -07:00
ad55674801
Added PT100 bed PID values (copied from extruder PID and untested)
2016-12-25 03:03:33 -07:00
93400ea4e0
Fix ENCODER steps in Configuration.h
...
Add temp tables for the E3D PT100 with Amplifier in thermistortables.h
Make it easier to switch to the PT100 temperature sensor with appropriate PID values for the Extruder.
2016-12-25 02:49:34 -07:00
e7bc6a0645
Z homing cords reconfigured.
2016-08-21 16:44:45 +02:00
053c727fed
Bed MINTEMP implemented, MAXTEMP behaviour changed, loading filament bug fixed, Extruder max feedrate increased and Italian language strings fix.
2016-08-07 20:20:48 +02:00
012e21d49d
Add files via upload
2016-07-28 15:19:23 +02:00
f17aa3b0a2
Adjusted the maximum acceleration of the Z axis to a sensible value
...
for the MK2 printer.
2016-07-26 15:36:35 +02:00
c8c92f8ae5
PLA preheat settings for MK2 set to 215/55
2016-07-20 16:30:44 +02:00
e115c5145f
MK2 Config files and hex output added
2016-05-31 14:36:31 +02:00
a4a80b3eb7
MK2 Firmware release.
2016-05-31 14:08:04 +02:00
7361f620d3
Extrude mintemp lowered for wax filaments support
2016-05-01 15:04:44 +02:00
9b8d663526
Better live adjust Z interface
2016-05-01 13:56:55 +02:00
d1df17a722
Tweaked mesh positions
2016-04-28 17:00:20 +02:00
7bfe91483d
Calibration process added
2016-04-28 14:50:25 +02:00
1ce1088d6f
Bed PID added and minor tweaks
2016-04-19 11:32:22 +02:00
d7417e1dd3
Mesh Bed Leveling rewritten, upcaling of tiles, better bed finding method and minor other tweaks.
2016-04-01 16:48:48 +02:00
7f9e947954
Added debug output
2016-03-25 14:53:55 +01:00
f98cf1b44b
Added automatic mesh bed leveling feature
2016-03-12 17:14:11 +01:00
12cce64f90
Variants name changed for better readability and match command reply
2016-02-21 18:12:32 +01:00
f8c65e39ae
Reorginized the repository and added license
2016-02-21 15:02:31 +01:00
3d-gussner
PavelSindler
PavelSindler
Aaron Yourk
michalprusa
akukan
bubnikv
akukan
Josef Prusa