2aa6cfc1ab
Optimise mmu_cut_filament_menu ( #40 )
...
preheat_or_continue should be used here to reduce copying code
2022-09-16 10:22:38 +02:00
8eb054e789
Fix trying to use serial before it's intiialized
2022-09-16 10:22:38 +02:00
ace5130d9f
PFW-1375 MMU error reported by MK3S does not appear on LCD
2022-09-16 10:22:38 +02:00
7d3a50450d
PFW-1340 Hide Done button for two errors
...
* FSENSOR_DIDNT_TRIGGER
* FSENSOR_DIDNT_GO_OFF
The Done button does not Move the E-motor because it
expects the user to have manually resolved the problem
Also if the filament is in the gears, we cannot pull the filament out.
In this case the Retry button is more suited as it will unload the filament.
2022-09-16 10:22:38 +02:00
4dd689ba9a
Fix PFW-1357 ( #35 )
...
lcd_encoder_diff would be set to 0 if lcd_update_enable(true)
is called outside ReportErrorHookMonitor
This would put enc_dif out of sync with lcd_encoder_diff and could cause false rotation triggering
2022-09-16 10:22:38 +02:00
d7d6885765
PFW-1351 Cooldown timeout ( #33 )
...
* PFW-1351 WIP
* Fix bug with cooldown timing due to bad bitfield.
* Use default safety timer value for timeout
2022-09-16 10:22:38 +02:00
d1b216da0d
Disable fsensor newVolt debug reporting
2022-09-16 10:22:38 +02:00
f94c2cba46
Fix rendering temp. + toolchange on MMU error screen
2022-09-16 10:22:38 +02:00
a004273e8f
Avoid drawing MMU Error screen while MMU moves manually
2022-09-16 10:22:38 +02:00
98adcbaff2
Bump required MMU FW version to 2.0.18
2022-09-16 10:22:38 +02:00
dab26fe50b
Report detected MMU version in the Support menu
...
It was just subtly broken, all the functionality had already been implemented.
2022-09-16 10:22:38 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
0e96169bb3
remove logspam
2022-09-16 10:22:38 +02:00
4ea53ad4bf
fix bug I introduced
2022-09-16 10:22:38 +02:00
c07a5f396d
Fix button enum
2022-09-16 10:22:38 +02:00
d9676eff25
Fixed buged temperature resume.
2022-09-16 10:22:38 +02:00
f9bedc3c94
Button handling WIP
2022-09-16 10:22:38 +02:00
9a20c85a5d
First pass, improving the error recovery.
2022-09-16 10:22:38 +02:00
1e391f303c
PFW-1344 Fullscreen message Loading Filament
...
When loading a filament through the LCD,
show a full screen message:
Loading Filament N
Where N can range from 0 to 5.
2022-09-16 10:22:38 +02:00
8aa16a6429
Write documentation for lcdui_print_extruder
2022-09-16 10:22:38 +02:00
8fd1653b84
PFW-1343 initial commit
2022-09-16 10:22:38 +02:00
ed04c24ba0
Implement 'Filament not loaded' option for M600 with MMU
2022-09-16 10:22:38 +02:00
caf98936e3
Minor cleanup
2022-09-16 10:22:38 +02:00
b9c23cd6b8
Add Unloading message to LCD
...
Also made mmu_M600_load_filament static to limit its scope
2022-09-16 10:22:38 +02:00
d5cdb412ba
Introduce a way to read the previous tool used
2022-09-16 10:22:38 +02:00
2d02877686
Disable automatic in M600
2022-09-16 10:22:38 +02:00
e39bc3f12d
During Tx, temporarily allow cold extrusion
...
This prevents a FSENSOR DIDNT TRIGGER error
and allows the bondtech gears to grab the filament.
2022-09-16 10:22:38 +02:00
45a5e719a2
Disable filRunout when MMU.Enabled()
...
It turned out the runout is caused by the ramming sequence in the G-code, which is interpreted before the actual MMU command gets into processing.
The frequency of these errors/runouts differed one machine from another and was really hard to track down.
Therefore - once the MMU is enabled (active and running) we'll disable filament runout handling caused by the printer's filament sensor.
2022-09-16 10:22:38 +02:00
a1881b4a07
Disable filament runout when MMU is unloading
2022-09-16 10:22:38 +02:00
762080ab1a
Fix some partking and recovery bugs
2022-09-16 10:22:38 +02:00
8b6941d493
Temporarily disable runout
...
There are still printers which suffer from spurious runouts for no reason.
For testing purposes, runout will be disabled until the real cause is found.
2022-09-16 10:22:38 +02:00
01f926f074
Fix build MK25S
2022-09-16 10:22:38 +02:00
f155c7664d
Add missing CheckUserInput calls, fix bad array entry for FW_update
2022-09-16 10:22:38 +02:00
e8088b0161
Allow reset if the EEPROM is set to "on"
2022-09-16 10:22:38 +02:00
888a37450b
Fix wrong return
2022-09-16 10:22:38 +02:00
73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
204b43dce4
PFW-1336
...
The following situation is now fixed, steps:
1. Load filament through LCD
2. Load to nozzle through LCD
3. Before filament reaches Fsensor => turn off the printer
4. Wait a few seconds and then turn the printer on again
5. Start a print through the SD card
6. Printer will unload and then re-load the filament
Previously in step 6, the printer would start a print without any
filament loaded.
2022-09-16 10:22:38 +02:00
46184a9447
Update printer name if M862.3 is called but not M862.2
2022-09-16 10:22:38 +02:00
236098dbca
Make init MMU error screens send buttons (Idle mode)
2022-09-16 10:22:38 +02:00
b880559ba7
Reset MMU upon start + fix reporting its start errors
2022-09-16 10:22:38 +02:00
1ff7459743
Re-enable filament runout + add debug msgs
...
Needs a fix on the MMU side (report FeedToBondtech::DisengageIdler)
2022-09-16 10:22:38 +02:00
b6b265e371
Hack around old MMU FW's msgs
2022-09-16 10:22:38 +02:00
c1134e7e68
Cleanup: Remove an old comment
2022-09-16 10:22:38 +02:00
bd932b3b10
Cleanup: Fix two compiler warnings
2022-09-16 10:22:38 +02:00
cfc56af95c
Cleanup: fix parameter comments
2022-09-16 10:22:38 +02:00
268c96334b
Cleanup: Pull out PrusaErrorCodeIndex
...
Saves 8 bytes of flash
2022-09-16 10:22:38 +02:00
d49e858cf7
PFW-1323 Fix MMU error screen doesn't disappear when error resolved on the MMU
2022-09-16 10:22:38 +02:00
7b91e73c8b
Fix issue where error screen updates too slowly in manage_response
2022-09-16 10:22:38 +02:00
98d07e6a09
Call lcd_set_custom_characters_nextpage
2022-09-16 10:22:38 +02:00
5ced30d8ca
Cleanup: Add comments and reduce code size slightly
2022-09-16 10:22:38 +02:00
Guðni Már Gilbert
VintagePC
D.R.racer