751f810dd7
ALTFAN implementation ( #2692 )
...
* ALTFAN implementation
* Use CRITICAL_SECTION macros
* Use uint16_t instead of unsigned int
* Add forgotten CRITICAL_SECTION
* Documentation
2020-06-01 17:58:15 +02:00
a10b7f3963
Merge pull request #2470 from leptun/MK3_Adjusted_mintemp
...
Adjusted hotend, bed and Ambient mintemp values
2020-02-07 08:54:50 +01:00
eb2ca78167
Rewrite uvlo handling for accurate Z re/positioning
...
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
the Z position to a true fullstep before disabling the motor. This
avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
introduce a new "PRUSA MBL" gcode as most of the procedure is
enqueued, and no existing gcode was available.
2020-01-26 17:46:50 +01:00
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values
2020-01-21 14:50:53 +02:00
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter
...
Enable MMU cutter.
2020-01-09 13:47:44 +01:00
19589f02f1
Remove an unused define
2019-12-04 17:22:21 +01:00
779423f0e7
Move hardcoded values to variants
2019-11-29 15:06:54 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
469ca6e184
Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter
2019-08-15 14:48:28 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
f9e32c4bf4
Re-enable linearity correction for MK3.
2019-07-23 19:22:54 +02:00
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
4e7de776cd
Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore.
2019-07-10 17:07:00 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
181c42fa62
Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter
2019-06-18 20:03:41 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500
...
Allow save of uStep resolution with M500
2019-05-13 17:08:34 +02:00
a9d6ae296b
Enable watchdog for all variants.
2019-05-10 16:30:08 +02:00
18dec75b56
MK2.5 - watchdog enabled + test (command "D-1")
2019-04-29 13:19:59 +02:00
469aa10097
Enable MMU cutter.
2019-03-29 07:27:29 +01:00
632781c4a2
"disable_z()" for Delta PSU
2019-03-21 00:45:15 +01:00
0f21ccee3c
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
2019-03-19 21:39:59 +00:00
7d98177716
farmMode updates
2019-03-19 19:48:40 +01:00
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7
...
7x7 mbl and switching mmu modes
2019-03-15 19:55:15 +01:00
0ca52216f3
Revert "variants update"
...
This reverts commit c3a95ab79b
2019-03-15 13:14:32 +01:00
ffe45bdef3
Disable mmu filament cutter feature.
2019-03-15 03:38:37 +01:00
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
c3a95ab79b
variants update
2019-03-12 11:57:35 +01:00
f0cc313fed
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
7f92d73a40
MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update
2019-03-04 17:04:22 +01:00
26cab2911f
mmu stealth mode
2019-02-22 16:30:54 +01:00
a220c97f94
Revert "variant files"
...
This reverts commit 850d3316b6
2019-02-06 16:19:30 +01:00
850d3316b6
variant files
2019-02-06 15:18:12 +01:00
5324181bf7
maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself
2019-02-03 20:56:14 +01:00
60acdd23c5
variants
2019-01-28 21:12:38 +01:00
8f039263d5
variant files and version
2019-01-28 17:14:24 +01:00
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
46e2bdaf62
Merge remote-tracking branch 'public_remote/MK3' into PFW-556
2019-01-24 19:39:34 +01:00
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
867182c266
minTemp
...
more user-proof solution
2019-01-23 18:50:13 +01:00
54f8f4eb4d
Merge pull request #1460 from MRprusa3d/PFW-723
...
Pfw 723
2019-01-23 14:12:19 +01:00
d7ac459da7
PID / manage_heater
...
build-warnings elimination
2019-01-20 01:23:15 +01:00
052ae323f8
Merge branch 'MK3' into prusa3d-DEV_MK3
2019-01-15 16:58:36 +01:00
3ab1daf722
MMU_DEBUG temporarily enabled
2018-12-21 23:17:32 +01:00
688d4a8a82
missing defines in variant files
2018-12-21 21:05:54 +01:00
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 22:32:47 +01:00
e52e53d1eb
send continue loading commands periodically if initial load fails
2018-12-12 13:54:17 +01:00
35378769fd
MMU - idler sensor
2018-12-06 19:19:50 +01:00
6157c3ab32
New filament sensor
2018-12-06 15:41:53 +01:00
83a9f75abe
minTemp
...
correct minTemp detection @ MK2.5 & MK3
2018-11-28 23:43:16 +01:00
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
9a68501039
MK2 variants compilable
2018-11-06 14:17:43 +01:00
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q
...
filament quality measurements disabled
2018-11-05 19:14:34 +01:00
89ad02ac8c
filament quality measurements disabled
2018-11-05 18:37:36 +01:00
d6b5f5a1c7
PFW643 - removed M910-M918, implemented M907
2018-11-05 16:15:27 +01:00
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
d005005e22
Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging
2018-10-22 20:33:38 +02:00
bc247ca02c
MK2.5 sw reset at setup function
2018-10-19 17:54:48 +02:00
b8f92fdfa9
MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers
2018-10-18 02:44:16 +02:00
0d9b502937
Merge pull request #1246 from PavelSindler/variants_max
...
MK3: default max feedrate for x and y changed to 100mm/s
2018-10-10 16:46:34 +02:00
bbd4f70f41
Merge pull request #1221 from XPila/MK3
...
Update fsensor in Manage_inactivity instead of main loop.
2018-10-10 13:12:12 +02:00
809ae5a5f0
default max feedrate for x and y changed to 100mm/s
2018-10-09 20:03:28 +02:00
9960c80bf7
Additional check always with enabled oq_meassure
...
+ variant files
2018-10-04 16:12:41 +02:00
0184f06dcf
preHeatError
...
correction of preHeatError detection
2018-09-27 04:23:00 +02:00
1bb9e9ed92
MMU_DEBUG
2018-09-10 20:39:28 +02:00
d96b0d5f32
linearity correction define added (menu readded)
2018-08-30 11:28:12 +02:00
5769b758ee
max feedrate for stealth mode reduced to 100mm/s (because of loudness)
2018-08-26 16:50:28 +02:00
71f1a1f6db
MMU - communication, check after start, code cleaning
2018-08-07 20:37:59 +02:00
d378575a68
SNMM_V2 - default retraction declared as variable
2018-08-02 17:07:09 +02:00
40da6deef8
timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file
2018-07-31 19:00:42 +02:00
4fb27866f4
Merge pull request #972 from PavelSindler/end_file_section
...
End file section for searching M84 in gcode file enlarged
2018-07-26 19:59:37 +02:00
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang
...
EEPROM dump (code D3)
2018-07-26 19:59:09 +02:00
5bda19b9f7
config for mmu updated
2018-07-26 14:59:49 +02:00
691e7a24ed
EEPROM dump (code D3)
2018-07-26 13:20:35 +02:00
da82062d41
End file section for searching M84 in gcode file were enlarged (compatibility with mmu Slic3r)
2018-07-25 18:26:22 +02:00
e47656df97
config for MK2.5 change
2018-07-23 21:12:50 +02:00
e4641d3db4
config for MK25 Rambo1.0 changed
2018-07-23 21:09:07 +02:00
f72f385c82
SUPPORT_VERBOSITY temporary solution
2018-07-23 20:11:16 +02:00
c65efd0114
config file updated
2018-07-23 20:05:42 +02:00
b688bc9294
Merge branch 'MK3' into reapply_fix_compiler_warnings
2018-07-23 14:38:43 +02:00
88cce94cf9
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
...
This reverts commit 77426b563a
2018-07-23 13:35:38 +02:00
60b4db15e0
FSensor - M600 fix + cond. translation + tunning filter and params
2018-07-22 16:14:13 +02:00
1309c52bcf
FSensor - code cleaning + simplification
...
+ removed DEBUG_DISABLE_FSENSORCHECK
+ added FILAMENT_SENSOR
2018-07-20 23:48:00 +02:00
a7e139ad8d
limist added to configuration files
2018-07-20 17:38:24 +02:00
2a66251170
_DISABLE_M42_M226 removed
2018-07-19 19:33:28 +02:00
c3e28b490c
TMC2130 old style limits removed
...
+menu draw_edit fix
2018-07-19 17:42:59 +02:00
268d2634f0
LCD menu optimalization - lcd and menu
...
removed unused code and conditional translation
2018-07-16 02:13:52 +02:00
39bb855333
LCD menu optimalization - menu_item_edit_int3
...
MenuStack removed
FILAMENT_LCD_DISPLAY and ENCODER_STEPS_PER_MENU_ITEM removed (unused)
EXPERIMENTAL_FEATURES menu removed
2018-07-15 18:37:59 +02:00
007717bfd2
Disabled TMC2130 feedrate and acceleration limits (should be properly limited with M201-M203)
2018-07-12 19:04:44 +02:00
7c78559b0e
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-07-12 18:27:06 +02:00
066c044396
fixed tmc2130_wr_CHOPCONF
...
backlash - initial implementation (disabled by default)
removed menu "W25x20CL init"
splashscreen displayed before entering optiboot
2018-07-11 20:02:46 +02:00
5979bf5e0c
T-codes for MMU_V2: initial version
2018-07-09 13:57:36 +02:00
8d2acd02a5
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-07-09 12:44:58 +02:00
12de2f95e6
Farm mode: PFW360, PFW361, PFW362, PFW363
2018-06-25 17:29:34 +02:00
4d42617b21
LCD menu optimalization, saved ~12k of flash space
2018-06-23 03:22:39 +02:00
2070c01b62
LCD menu printf test
2018-06-18 14:53:42 +02:00
75c6f0b937
variant files updated
2018-06-13 16:27:11 +02:00
a1ea5019dc
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-10 16:29:29 +02:00
1e35067c3f
fixed variant files, removed bool constants
2018-06-10 16:13:29 +02:00
4567d2feca
removed unused cond. trans. for NEW_SPI
2018-06-10 16:11:39 +02:00
c0946d8f04
New ML support - w25x20cl spi external flash support
...
+fixed some messages
+sec lang update test
2018-06-09 01:23:04 +02:00
8963757c3c
Merge branch 'MK3' into crash_detection_stop
2018-06-08 18:28:43 +02:00
332a23bef5
Crash detection stops and waits for user if it fails multiple times in short time frame
2018-06-08 16:08:07 +02:00
5a2b056d47
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
2018-06-01 00:43:16 +02:00
37e575f4bc
New ML support - debug output, bootloader
...
bootapp - automaticaly erase flash when necessary
+test code
2018-05-30 19:29:52 +02:00
167bc61ef9
Fixed redefined warning
2018-05-30 12:57:51 +02:00
15207e4d5e
Linearity correction fix - (eeprom storage changed to byte instead of word)
...
+enabled for XYZ axes
2018-05-28 01:47:08 +02:00
8573b65b05
_MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define)
2018-05-21 23:28:28 +02:00
2a5a7ab9d2
Add bed calibration points macro definitions to MK25 variants.
...
Homing and full print area printing tested on MK25.
2018-05-09 17:09:57 +02:00
f00bde09a4
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
2018-05-08 21:54:11 +02:00
964d019dd1
MK3 - extruder current = 30
2018-05-02 13:42:05 +02:00
1fc3f9816c
Merge remote-tracking branch 'upstream/MK3' into MK3-V3_2
2018-04-30 16:29:02 +02:00
47868145e6
Decreased stallguard sensitivity for Z axis because meshbedleveling failed on some printers (PFW298).
2018-04-30 16:28:26 +02:00
12dda6a6ca
Merge pull request #688 from PavelSindler/MK3_for_merging
...
MK3 variants file change
2018-04-27 18:41:49 +02:00
068ee08454
MK3 variants file change
2018-04-27 18:41:00 +02:00
e69134eb1c
Rambo 1.0 support (MK25, MK2)
2018-04-27 17:04:55 +02:00
6fb0fa1458
variants for MK3: temporary change
2018-04-27 15:19:28 +02:00
99be28d335
variants file: force selftest enabled again
2018-04-27 14:59:56 +02:00
75075bed31
Hot fix print area crop on MK3. Move print area -2mm in Y axis (Y_PROBE_OFFSET_FROM_EXTRUDER to 3). Do not limit print area for skewed axis (increase Y_MAX_POS to 212.5). Preserve Z homing point for uncalibrated printer (DEFAULT_Y_OFFSET to 2.f).
2018-04-26 22:01:28 +02:00
84a53370d3
temporary change in MK3 variants file: disable forced selftest
2018-04-26 14:50:16 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
2f49574822
Add files via upload
2018-04-25 18:48:15 +00:00
5a9cc39562
Merge pull request #654 from XPila/MK3-V3_2
...
New current setting for MK3
2018-04-24 17:10:19 +02:00
468645e92e
Set DEFAULT_Y_OFFSET to 4 mm for MK3 printer.
2018-04-23 20:34:04 +02:00
864284f043
New current setting for MK3
...
X, Y: no change
Z: +26.1%
E: -28.5%
2018-04-23 20:17:45 +02:00
82b31e8552
Set [0;0] point offset for uncalibrated printer.
2018-04-20 15:01:11 +02:00
78245ce566
farm preheat temperature for heatbed
2018-04-11 18:54:27 +02:00
6b77e68924
Add files via upload
2018-04-10 18:07:08 +00:00
339d2ebdef
Z-axis stealth mode
...
XYZcal fix
2018-04-03 18:26:39 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
3ff5686336
MK2-25-3 variant files
2018-03-14 13:53:36 +01:00
Alex Voinea
DRracer
Yuri D'Elia
Marek Bel
MRprusa3d
Simon Benoit
MRprusa3d
Marek Běl
Robert Pelnar
Harpalyke
PavelSindler
PavelSindler
3d-gussner