329745368e
Improve PAT9125 UI implementation
2022-09-16 10:20:32 +02:00
340bc87110
Checkpoint: jam detection
2022-09-16 10:20:32 +02:00
f9ff929bbe
Enable fsensor when preparing for shipping
2022-09-16 10:17:04 +02:00
5484882758
Checkpoint after a lot of removal
2022-09-16 10:17:04 +02:00
fc49ba115a
Move more IR sensor analog stuff to Filament_sensor.h
2022-09-16 10:09:20 +02:00
7224b5c2b6
Remove OQ and add fancy autoload interaction
2022-09-16 10:08:39 +02:00
d84e6bda63
Remove old fsensor init
2022-09-16 10:07:49 +02:00
45e43137a5
Filament sensor refactoring initial
2022-09-16 10:07:49 +02:00
270a1086ab
No translation needed
2022-09-14 11:33:24 +02:00
0a68de0bbe
Update MSG c=xx
...
Mark unused strings as `_n`
2022-09-14 11:33:24 +02:00
510f13b24a
Make the diag pins open collector with pullup.
...
Solves random crash detected on startup
2022-09-14 07:39:47 +02:00
996f9943a1
Extract PRINTER_ACTIVE into a noinline function
...
Having the original PRINTER_ACTIVE macro copied at multiple spots doesn't make sense.
Refactoring it into a non-inline function saved ~400 bytes of code.
It should be safe in terms of performance, all occurrences are at non-time critical spots.
2022-09-14 07:31:39 +02:00
d78506a8ea
TM: Rename D70 I to D70 S for consistency with M310 S
2022-09-02 15:59:29 +02:00
10c524fdb3
TM: Add M310 [F] parameter to enable autotune self-test
2022-09-02 15:59:29 +02:00
9b5ef75b68
Correctly translate thermal model LCD messages
2022-09-02 15:59:29 +02:00
39eb728d54
More farm optimizations
...
Kudos @gudnimg
2022-08-30 13:57:43 +02:00
d1c30c338f
Fix farmless mode
2022-08-30 13:57:43 +02:00
bef7b086e3
Isolate the entire farm and statistics code
2022-08-30 13:57:43 +02:00
7d597eb8b0
Move farm mode to separate file
2022-08-30 13:57:43 +02:00
4e7d686b83
Merge pull request #3574 from leptun/extra_optimizations
...
More optimizations for 3.12 to fit
2022-08-29 19:25:46 +03:00
692f51c51e
Save target bed temperature, not current temperature
2022-08-28 11:21:17 +03:00
7d86a0d121
Reduce a few magic numbers for FILENAME_LENGTH
...
flash: 0
RAM: 0
2022-08-26 19:26:26 +03:00
22582e560e
Remove one redundant st_synchronize() call
...
flash: -4
RAM: 0
st_synchronize() is called just before leaving gcode_G28() so we don't need to call it again just after leaving gcode_G28()
2022-08-26 19:25:07 +03:00
25350dfbbc
Remove unused variable bFilamentFirstRun
...
flash: 0
RAM: -1
2022-08-26 19:14:40 +03:00
f7ae3039f8
Don't include M851 in build if Auto Bed Leveling is not enabled
...
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
2022-08-26 15:35:28 +00:00
78534f3b48
Start at the first segment, not the last segment
2022-08-24 20:19:26 +03:00
671519caf3
Optimize by hand since the lto is still stooopit
...
saves ~100B
2022-08-24 20:19:26 +03:00
b27c8b50e0
Fix power panic handling
2022-08-24 20:19:26 +03:00
05bd1ba57f
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
0933fdb6fe
Merge pull request #3552 from wavexx/temp_model_check
...
Thermal Model protection
2022-08-24 19:16:48 +02:00
7cd888cd0a
Update documentation of ThermalStop()
2022-08-21 15:22:46 +02:00
3ebd8b88a4
Merge pull request #3486 from gudnimg/gudni-optimisation
...
Flash optimizations in loop() and status screen menu
2022-08-19 17:21:17 +02:00
0a8d2a3224
Merge pull request #3456 from wavexx/filament_load_consistency
...
Cleanup: use more constants in M701
2022-08-19 17:14:54 +02:00
84888507e3
Merge pull request #3557 from wavexx/fix_g28_code_value
...
G28: check for X/Y/Z parameters before calling code_value_long
2022-08-19 17:12:07 +02:00
06d19b472a
G28: check for X/Y/Z parameters before calling code_value_long
...
Fixes #3555 , thanks to @toombaumarkt
2022-08-07 00:36:54 +02:00
68c04ca2f6
Switch a few pointers that don't manipute strings to const
2022-08-06 23:08:03 +02:00
a533ba3574
Reset sdpos_atomic when starting a new SD print
...
Fix an incorrect SD offset on the first G-Code command when the second
SD print is started.
2022-08-06 22:16:50 +02:00
8cbe69e285
Update RepRap documentation
2022-08-02 17:56:53 +02:00
33a0a58810
Optimise manage_inactivity call in loop()
...
Saves 12 bytes of flash
2022-07-27 11:14:17 +00:00
c5c2557c5e
Improve M310 documentation
2022-07-25 17:30:22 +02:00
374b829fb6
Generalize menu_block_entering_on_serious_errors for menu lockout
...
Call this variable menu_block_mask instead. We don't need to know the
exact reason of why we're locking the menu.
We will be able to reuse this to prevent menu entry during more
activities in a cleaner way than testing for each condition as it's
currently done for both menu entry and longpress.
2022-07-25 17:30:22 +02:00
cb3fec5cac
Improve M310 documentation
2022-07-25 17:30:22 +02:00
39ad53ab11
Simplify fan checks now that lcd pause works correctly
2022-07-25 17:30:22 +02:00
1eb7871bab
Also save fan speeds during a thermal error pause
...
Similarly to temperatures, the fan speed is overwritten and needs to be
restored appropriately.
2022-07-25 17:30:22 +02:00
eccfcd7424
Save/restore temperatures during a thermal pause
...
Re-used saved_* vars (as normally used during the paused state) to
backup the original values when a thermal error occurs.
2022-07-25 17:30:22 +02:00
63dab63f2e
uvlo: Never wait for bed temperature when recovering
...
If the user accepted to resume, do not wait for bed temperature when
recovering. This only adds a pointless delay when recovering a short
pause and doesn't really improve the recovery quality after a long
pause.
2022-07-25 17:30:22 +02:00
8f02262bbd
Save/restore bed temperature during pause
...
This will be needed during a thermal error pause that disables the bed
as an additional safety precaution.
2022-07-25 17:30:22 +02:00
9ef80226c9
Rename argument of ThermalStop for clarity
2022-07-25 17:30:22 +02:00
b9fc73c4c3
TM: Pause the print and allow recovery from a thermal error
...
Do not allow resuming until all thermal and fan errors are clear.
Call the appropriate resume function when resuming a printing depending
on the saved_print state (is saved_print is available, then we always
need to resume from the saved state even when printing via usb).
Clear the Stopped state when resuming, so that commands can be accepted
again.
2022-07-25 17:30:22 +02:00
d1864011f4
Handle pause/stop in the main loop, again
...
Force processing of the pause and stop "parking" commands _after_ the
main loop completes.
This was/is currently done in lcd_commands, which is a poor place to
continue processing, since it can be called already within an aborted
command. This requires checking for planner_aborted before any action
can be performed.
2022-07-25 17:30:22 +02:00
Alex Voinea
3d-gussner
D.R.racer
Yuri D'Elia
Guðni Már Gilbert
DRracer