40fae26d75
Silent / Hight Power mode switching - wait for standstill
...
parameter tunning:
PWM_GRAD, PWM_AMPL TCOOLTHRS (XY)
2017-09-26 12:22:58 +02:00
345fee66be
Silent mode x-axis amplitude adjust from 200 to 210, because of layershift at high speed.
2017-09-26 07:20:54 +02:00
b475d11bdb
Maker Faire brainstorm 2.0 (2)
...
Automatic recover after short power loss (according to heatbed temperature drop)
Adjusted crashdetection - TMC2130_TCOOLTHRS_X and TMC2130_TCOOLTHRS_Y = 450 to be enabled at low speed
!!!ALL FEATURES TESTED AT THIS POINT!!!
2017-09-26 06:11:42 +02:00
89121e6e34
Maker Faire brainstorm 2.0
...
Added filament sensor and crash detection to EEPROM
Added crash-detection counters display disable directive
Added Restore/Save print directive
Added crash detection and filament sensor settings to Tune menu
2017-09-26 04:30:10 +02:00
a883c8df84
preklep
2017-09-26 03:23:08 +02:00
73cc1c9c8a
initial state of crash detect and filament sensor is ON
...
slowed down return speed from crash detect after home
Added babystep apply after return from crash detect (don’t know if it’s accurate)
Added D10 to set machine to XYZ correctly calibrated
Added resume debug directive to mask additional menu item
2017-09-26 03:21:33 +02:00
39f6e746dc
Crashdetection tunning.
2017-09-26 01:43:56 +02:00
ed0fe01bcc
Decreased the homing feedrate for the X axis from 3000 to 2500mm/min.
...
With the old settings the stall guard did not work reliably.
2017-09-25 15:22:20 +02:00
c6e9896257
Changed the homing routine to avoid crashing into the right end stop.
2017-09-25 15:20:39 +02:00
b0ca2477c8
Modified homing procedures for the X & Y axes using the Trinamic stall guard
...
to run against the end stop with a repeatable velocity.
Slightly reduced the collision detection sensitivity.
2017-09-24 00:07:32 +02:00
b58dcf33d0
Removed a test snippet, which broke the power panic recovery.
2017-09-23 20:52:22 +02:00
d29e16dfb7
Merge pull request #58 from XPila/MK3
...
Powerpanic Z correction improved.
2017-09-23 20:37:13 +02:00
f2f74ebddf
Powerpanic Z correction improved.
2017-09-23 20:36:10 +02:00
4fa5669298
Merge pull request #57 from XPila/MK3
...
Soft homing + fixed homing in silent mode.
2017-09-23 20:02:15 +02:00
e11ae8bdbf
Soft homing + fixed homing in silent mode.
2017-09-23 20:01:37 +02:00
e44adfc71b
Merge pull request #56 from XPila/MK3
...
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:26 +02:00
480838a0a1
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:01 +02:00
5649e7be9d
Merge pull request #55 from XPila/MK3
...
Silent/High Power mode switching with crashdetection.
2017-09-23 15:09:01 +02:00
89acf29247
Silent/High Power mode switching with crashdetection.
2017-09-23 15:01:31 +02:00
e676ce6230
Merge pull request #53 from XPila/MK3
...
Crashdetection
2017-09-22 23:08:08 +02:00
d2ff47dac8
Crashdetection
2017-09-22 23:06:52 +02:00
03b7a8e765
Merge pull request #52 from PavelSindler/MK3
...
fan error during print improved
2017-09-22 21:22:17 +02:00
a95506b128
fan speed error during print fixed
2017-09-22 21:21:16 +02:00
1ca48ef160
Merge pull request #51 from XPila/MK3
...
SG limits adjusted (x=5,y=5), for homing is possible to set different…
2017-09-22 20:53:26 +02:00
4805713b8d
SG limits adjusted (x=5,y=5), for homing is possible to set different values (x=5,y=5, without filter).
2017-09-22 20:53:00 +02:00
d1a065881b
fan error: long pause is used during print, resuming print resets error flag; stop print used during heating phase
2017-09-22 20:43:30 +02:00
7e71d21a03
Merge pull request #50 from PavelSindler/MK3
...
Fan errors updated
2017-09-22 19:48:27 +02:00
045ffb9f0e
languages updated
2017-09-22 19:47:08 +02:00
13f45adb13
fan error changes
2017-09-22 19:31:52 +02:00
bf5e4de5b7
Merge pull request #49 from XPila/MK3
...
Crashdetection + configuration file.
2017-09-22 19:29:29 +02:00
df1aa85526
Crashdetection + configuration file.
2017-09-22 19:28:32 +02:00
b87dc69042
merging with upstream
2017-09-22 18:26:13 +02:00
a53428835a
fan error improvements
2017-09-22 18:22:21 +02:00
10cd30b9c6
Merge pull request #48 from XPila/MK3
...
Language files (EN only), because of flash overflow.
2017-09-22 17:43:37 +02:00
f5e39112a2
Language files (EN only), because of flash overflow.
2017-09-22 17:42:53 +02:00
522b438ef5
Power panic: When panicking, move the X carriage to the bed side fast.
2017-09-22 16:44:00 +02:00
a8297369b2
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware-DEV into MK3
2017-09-22 15:43:56 +02:00
23b4fa6c0d
Some fixes / improvements of the power panic:
...
1) Fix of an order of SD card function calls on recover: First set position, then restart the print.
2) Some convenience improvements: On panic, the X axis moves to the edge to avoid oozing into the print.
3) On recovery, move Z up if the head is too low to make it easier for the user to clean the print head.
2017-09-22 15:43:39 +02:00
37d7740e42
Merge pull request #47 from PavelSindler/MK3
...
fan check turn off, saving to eeprom with offset and levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-22 14:39:52 +02:00
72ab17f585
Further fixes of the power panic and g-code & planner queues.
2017-09-22 13:44:10 +02:00
582a6270b0
Fix of a power panic print stop.
2017-09-21 17:50:39 +02:00
effe6126be
eeprom error message
2017-09-21 15:35:46 +02:00
6eb57da770
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-21 15:20:02 +02:00
641c21a97b
Merge pull request #46 from XPila/MK3
...
Power Panic - new method of sd_position calculation.
2017-09-21 05:47:49 +02:00
1409bd633c
Power Panic - new method of sd_position calculation.
2017-09-21 05:35:41 +02:00
21071c7ed1
Merge pull request #45 from XPila/MK3
...
XY homing repeatibility - move by 160um from margin.
2017-09-21 04:56:09 +02:00
9b901bd3f5
XY homing repeatibility - move by 160um from margin.
2017-09-21 04:55:30 +02:00
47f955e306
Merge pull request #44 from XPila/MK3
...
MAKER FAIRE
2017-09-21 02:56:26 +02:00
4cae00741e
MAKER FAIRE
...
filament sensor: runout detection tuning, save/restore print
silent mode: safe mode selection durring printing and after homing
2017-09-21 01:52:28 +02:00
cb16ca0931
Merge pull request #43 from XPila/MK3
...
Recover print
2017-09-20 16:39:32 +02:00
Robert Pelnar
bubnikv
PavelSindler
PavelSindler